Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Maths (Higher calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number Operations and Integers
Unit 2
Fractions, Decimals and Percentages
Unit 3
Indices and Surds
Unit 4
Approximation and Estimation
Unit 5
Ratio, Proportion and Rates of Change
Unit 6
Algebra
Unit 7
Graphs of Equations and Functions
Unit 8
Basic Geometry
Unit 9
Congruence and Similarity
Unit 10
Mensuration
Unit 11
Probability
Unit 12
Statistics
Avg
score:
–
Topics
done:
0/121

Volume and surface area of prisms and cylinders

Practise 16 exam-style questions on Volume and surface area of prisms and cylinders for OCR GCSE Maths (Higher calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 2–5 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

A closed cylinder has radius 3.5 cm and height 10 cm.

Leo works out the total surface area of the cylinder.
Here is his working.

\(2 \times \pi \times 3.5 \times 10 + \pi \times 3.5^2 = 258\) cm²

Leo's answer is wrong.
Describe his error and work out the correct total surface area.
Give your answer correct to 3 significant figures.

Model answer

Leo has only included one circular end. A closed cylinder has two circular ends.
Curved surface = \(2 \times \pi \times 3.5 \times 10 = 219.91...\) cm²
Two ends = \(2 \times \pi \times 3.5^2 = 76.96...\) cm²
Total surface area = 296.88... cm²
= 297 cm² (3 s.f.)

Explanation

The surface of a closed cylinder is the curved surface (a rectangle of width 2πr when opened out) plus two circles, the top and the bottom. Leo's curved surface is correct, but he has only one circle.

Mark scheme
  1. 1 mark

    B1 for: he has included only one circular end, but a closed cylinder has two oe

    Accept 'he should have \(2 \times \pi \times 3.5^2\)', 'he forgot the top (or bottom)'. Do not accept 'he used the wrong formula' on its own.

  2. 1 mark

    B1 for 297

    Accept 296.8 to 297 (exact value 296.88...), from \(2 \times \pi \times 3.5 \times 10 + 2 \times \pi \times 3.5^2\). This mark is independent of the first.

Question 2

3 marks

A cube has a volume of 500 cm³.

Work out the total surface area of the cube.
Give your answer correct to 3 significant figures.

Model answer

Side of the cube = \(\sqrt[3]{500} = 7.9370...\) cm
Area of one face = \(7.9370...^2 = 62.996...\) cm²
Total surface area = 6 × 62.996... = 377.97... cm²
= 378 cm² (3 s.f.)

Explanation

The volume of a cube is side³, so the side is the cube root of the volume. A cube has six identical square faces, so the surface area is 6 × side². Keep the full value of the side until the end.

Mark scheme
  1. 1 mark

    M1 for \(\sqrt[3]{500}\)

    Implied by 7.93 or 7.94 or 7.937... (accept 7.93 to 7.94); correct answer with no working scores full marks

  2. 1 mark

    M1 for \(6 \times\) their \(7.937...^2\)

    Accept their side 7.93 to 7.94 or better. Their side must come from a cube root.

  3. 1 mark

    A1 for 378

    Accept 377.9 to 378.3 (exact value 377.97...); more accurate answers are accepted. A side of 7.94 gives 378.26, accepted; a side of 7.9 gives 374, which scores M1 M1 A0. 63.0 (the area of one face) scores M1 M0 A0.

Question 3

3 marks

A cylinder and a cube have the same volume.
The height of the cylinder is equal to the length of an edge of the cube.

Show that the radius of the cylinder is about 0.564 times the length of an edge of the cube.

Model answer

Let the edge of the cube be \(s\) and the radius of the cylinder be \(r\). The cylinder's height is \(s\).
Volume of cylinder = volume of cube:
\(\pi r^2 s = s^3\)
\(r^2 = \dfrac{s^2}{\pi}\)
\(r = \dfrac{s}{\sqrt{\pi}} = 0.5641... \times s\)
So the radius is about 0.564 times the edge of the cube.

Explanation

Set the two volumes equal, using the same letter for the cube's edge and the cylinder's height. Dividing by s and by π, then square rooting, gives r = s ÷ √π. The ratio r : s is the same for every size, so working with a particular edge length also proves it.

Mark scheme
  1. 1 mark

    M1 for \(\pi r^2 s = s^3\) oe

    Any letters, e.g. edge s and radius r, with the height of the cylinder = s. Or a particular value of the edge used consistently, e.g. s = 10: \(\pi r^2 \times 10 = 1000\).

  2. 1 mark

    M1 for \(r^2 = \dfrac{s^2}{\pi}\) or \(r = \dfrac{s}{\sqrt{\pi}}\) oe

    Or, with s = 10, r = \(\sqrt{100 \div \pi}\) = 5.64...

  3. 1 mark

    A1 for \(\dfrac{1}{\sqrt{\pi}} = 0.5641...\) seen, with a conclusion

    Accept 0.5641 or better, or r = 5.641... for s = 10 (accept 5.641 or better) leading to 0.564 times. A particular value is acceptable because the ratio does not depend on the size. Answer only scores 0.

Question 4

4 marks

Rain falls on a flat roof that is a rectangle measuring 8.5 m by 6.2 m.
In one storm, 12 mm of rain falls on the roof.

All of this rain flows into a cylindrical tank with radius 0.75 m.

Work out how much the water level in the tank rises.
Give your answer in centimetres, correct to 3 significant figures.

Model answer

12 mm = 0.012 m
Volume of rain = 8.5 × 6.2 × 0.012 = 0.6324 m³
Base area of the tank = \(\pi \times 0.75^2 = 1.7671...\) m²
Rise in water level = 0.6324 ÷ 1.7671... = 0.35786... m
= 35.786... cm
= 35.8 cm (3 s.f.)

Explanation

The rain on the roof is a very thin cuboid, 12 mm deep. The same volume of water goes into the tank, where it forms a cylinder. Divide the volume by the tank's base area to find the rise, keeping all lengths in metres, then change to centimetres.

Mark scheme
  1. 1 mark

    M1 for \(8.5 \times 6.2 \times 0.012\) oe

    The volume of rain, 0.6324 m³ (exact), or 632 400 cm³ from 850 × 620 × 1.2; correct answer with no working scores full marks

  2. 1 mark

    M1 for \(\pi \times 0.75^2\) oe

    The base area of the tank, 1.767... m² (accept 1.76 to 1.77), or 17 671 cm².

  3. 1 mark

    M1 for their volume ÷ their base area, with consistent units

    0.6324 ÷ 1.767... = 0.3578... m. The 12 mm must be converted (to 0.012 m or 1.2 cm) for this mark.

  4. 1 mark

    A1 for 35.8

    Accept 35.78 to 35.8 cm (exact value 35.786...); more accurate answers are accepted. 0.358 (in metres) scores M1 M1 M1 A0. 3.58 (12 mm taken as 0.12 m) scores M0 M1 M0 A0.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.