Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Maths (Higher calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number Operations and Integers
Unit 2
Fractions, Decimals and Percentages
Unit 3
Indices and Surds
Unit 4
Approximation and Estimation
Unit 5
Ratio, Proportion and Rates of Change
Unit 6
Algebra
Unit 7
Graphs of Equations and Functions
Unit 8
Basic Geometry
Unit 9
Congruence and Similarity
Unit 10
Mensuration
Unit 11
Probability
Unit 12
Statistics
Avg
score:
–
Topics
done:
0/121

Enlargement

Practise 14 exam-style questions on Enlargement for OCR GCSE Maths (Higher calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 2–4 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

A rectangle is enlarged by scale factor 0.35.

The length of the image is 4.48 cm.

Work out the length of the original rectangle.

Model answer

Original length × 0.35 = 4.48
Original length = \(4.48 \div 0.35 = 12.8\) cm

Explanation

A scale factor between 0 and 1 makes the image smaller, so the original rectangle must be longer than 4.48 cm. To undo multiplying by 0.35, divide by 0.35. Multiplying again gives an even smaller length, which cannot be right.

Mark scheme
  1. 1 mark

    M1 for \(4.48 \div 0.35\)

    The decimals are exact values from the question; correct answer with no working scores full marks

  2. 1 mark

    A1 for 12.8 (cm)

    Exact. \(4.48 \times 0.35 = 1.568\) scores M0 A0.

Question 2

3 marks

The grid shows triangle P and triangle Q.

Describe fully the single transformation that maps P onto Q.

A coordinate grid with x from 0 to 9 and y from 0 to 11; each grid square is 1 unit across, and the axes cross at the origin O. Shape P is a shaded triangle with vertices (6, 2), (7, 2) and (6, 4). Shape Q is a shaded triangle with vertices (2, 4), (5, 4) and (2, 10).

Model answer

Q is the same shape as P, the same way up and bigger, so it is an enlargement.
The short side of P is 1 unit and the matching side of Q is 3 units: scale factor 3.
Lines through matching vertices, e.g. from \((2, 4)\) through \((6, 2)\) and from \((5, 4)\) through \((7, 2)\), meet at \((8, 1)\).
Enlargement, scale factor 3, centre \((8, 1)\)

Explanation

Compare matching sides to find the scale factor: every side of Q is 3 times the matching side of P. The centre is where the lines joining matching vertices meet; check that each vertex of Q is 3 times as far from \((8, 1)\) as the matching vertex of P. A full description needs enlargement, the scale factor and the centre.

Mark scheme
  1. 1 mark

    B1 for enlargement

    Accept enlarge or enlarged. If more than one transformation is described, award 0 marks for the question.

  2. 1 mark

    B1 for scale factor 3

    Do not accept \(\dfrac{1}{3}\), -3 or '3 times bigger' without the words scale factor unless clearly meaning the scale factor.

  3. 1 mark

    B1 for (centre) \((8, 1)\)

    Do not accept the centre written as a column vector.

Question 3

3 marks

Triangle F is mapped onto triangle G by a single transformation.
The diagram shows both triangles.

Give a full description of the transformation.

A coordinate grid with x from −9 to 8 and y from −8 to 9; each grid square is 1 unit across, and the axes cross at the origin O. Shape F is a shaded triangle with vertices (3, 4), (5, 4) and (7, 8). Shape G is a shaded triangle with vertices (−2, −1), (−5, −1) and (−8, −7).

Model answer

G is upside down and on the other side of a point from F, and bigger: an enlargement with a negative scale factor.
The side of F from \((3, 4)\) to \((5, 4)\) has length 2; the matching side of G, from \((-2, -1)\) to \((-5, -1)\), has length 3. So the scale factor is \(-\dfrac{3}{2} = -1.5\).
Lines through matching vertices cross at \((1, 2)\): e.g. \((3, 4)\) is 2 right, 2 up from \((1, 2)\) and \((-2, -1)\) is 3 left, 3 down.
Enlargement, scale factor -1.5, centre \((1, 2)\)

Explanation

When the image is upside down on the opposite side of the centre, the scale factor is negative. Its size comes from comparing matching lengths (3 ÷ 2 = 1.5). The centre lies between the two shapes, where the lines joining matching vertices cross.

Mark scheme
  1. 1 mark

    B1 for enlargement

    If more than one transformation is described, award 0 marks for the question; correct answer with no working scores full marks

  2. 1 mark

    B1 for scale factor -1.5

    Accept \(-\dfrac{3}{2}\). 1.5 or \(-\dfrac{2}{3}\) scores 0 for this mark.

  3. 1 mark

    B1 for (centre) \((1, 2)\)

    Do not accept the centre written as a column vector.

Question 4

4 marks

An enlargement with centre \((-1, 2)\) and scale factor 2.5 maps the point \(P(3, 3)\) onto the point Q.

Find the coordinates of Q.
Calculate the distance PQ, giving your answer correct to 3 significant figures.

Model answer

From the centre \((-1, 2)\) to P: 4 right, 1 up.
Multiply by 2.5: 10 right, 2.5 up.
Q = \((-1 + 10, 2 + 2.5) = (9, 4.5)\)
From P to Q: 6 right, 1.5 up
\(PQ = \sqrt{6^2 + 1.5^2} = \sqrt{38.25} = 6.1846...\)
PQ = 6.18 units (3 s.f.)

Explanation

An enlargement multiplies the step from the centre to each point by the scale factor. Add the enlarged step to the centre to get Q. P and Q are on the same line through the centre, and PQ is 1.5 times the distance from the centre to P, which gives a quick check.

Mark scheme
  1. 1 mark

    M1 for the step from the centre to P, \(\begin{pmatrix} 4 \\ 1 \end{pmatrix}\), multiplied by 2.5 to give \(\begin{pmatrix} 10 \\ 2.5 \end{pmatrix}\)

    2.5 is the exact scale factor; correct answer with no working scores full marks

  2. 1 mark

    A1 for \(Q(9, 4.5)\)

    Exact values. \((10, 2.5)\) (step not added to the centre) scores M1 A0.

  3. 1 mark

    M1 for \(\sqrt{6^2 + 1.5^2}\) oe

    The decimals here are exact values. FT their Q. Or \(1.5 \times \sqrt{4^2 + 1^2}\), or \(\sqrt{38.25}\).

  4. 1 mark

    A1 for 6.18

    Accept 6.18 to 6.185 (6.1846...). More accurate answers are accepted. 10.3 (the distance from the centre to Q) scores M0 A0 for this part.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.