Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Maths (Higher calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number Operations and Integers
Unit 2
Fractions, Decimals and Percentages
Unit 3
Indices and Surds
Unit 4
Approximation and Estimation
Unit 5
Ratio, Proportion and Rates of Change
Unit 6
Algebra
Unit 7
Graphs of Equations and Functions
Unit 8
Basic Geometry
Unit 9
Congruence and Similarity
Unit 10
Mensuration
Unit 11
Probability
Unit 12
Statistics
Avg
score:
–
Topics
done:
0/121

Plans and elevations

Practise 12 exam-style questions on Plans and elevations for OCR GCSE Maths (Higher calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 12 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
12 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

A solid hemisphere rests on its flat face on a table.

Write down the shape of its plan.
Write down the shape of its front elevation.

Model answer

Plan (from above): a circle.
Front elevation (from the front): a semicircle, with its straight edge along the table.

Explanation

Looking down on a dome you see its whole circular outline, so the plan is a circle. From the side, the flat face is a straight line on the table with the curved surface above it, so the front elevation is a semicircle.

Mark scheme
  1. 1 mark

    B1 for plan: circle

    Do not accept semicircle for the plan; correct answer with no working scores full marks

  2. 1 mark

    B1 for front elevation: semicircle

    Accept 'half a circle' (with the straight edge at the bottom). Do not accept circle or 'dome' alone.

Question 2

2 marks

The diagram shows a solid made from cubes.
The arrows show the front and the side of the solid.

Tom says
'The front elevation and the side elevation of this solid are the same, because they both have 6 squares.'

Is Tom correct?
Show how you decide.

A solid made from cubes, drawn on isometric paper: 3 cubes wide, 3 deep and up to 3 high, standing on a flat base (every stack goes down to the base). An arrow labelled "Front" points at the front of the solid and an arrow labelled "Side" points at its right-hand side.

Model answer

Front elevation: the tallest stack in each column, from left to right, is 2, 3 and 1, so the front elevation has columns of 2, 3 and 1 squares.
Side elevation (from the right, with the back of the solid on the left): the tallest stack in each row is 3 (back), 1 (middle) and 2 (front), so its columns are 3, 1 and 2 squares.
Both have 6 squares, but the shapes are different (the tallest column is in the middle of the front elevation but at the end of the side elevation).
So Tom is not correct.

Explanation

Two views with the same number of squares can still be different shapes. Work out each view column by column: from the front each column shows the tallest stack in that column, and from the side each column shows the tallest stack in that row.

Mark scheme
  1. 1 mark

    B1 for front elevation columns 2, 3, 1 (left to right) or side elevation columns 3, 1, 2 (back to front, as seen from the side)

    Exact values. Either view correctly described.

  2. 1 mark

    B1 for No, with both views correct: front 2, 3, 1 and side 3, 1, 2, so the shapes are different even though both have 6 squares

    Accept the side elevation described as columns of 2, 1, 3 from front to back. The decision must be supported by both views. 'No' with no working scores 0.

Question 3

3 marks

The diagram shows a cone standing on its base.
The base has radius 4 cm and the slant height is 9 cm.

The front elevation of the cone is an isosceles triangle.

Calculate the area of the front elevation.
Give your answer correct to 3 significant figures.

A cone drawn in 3D (hidden edges dashed). The radius is labelled 4 cm (on a dashed line from the centre of the base to its edge). The slant height is labelled 9 cm (along the sloping side). The diagram is labelled "Not to scale".

Model answer

Seen from the front, the cone is an isosceles triangle with base equal to the diameter, 8 cm, and sloping sides equal to the slant height, 9 cm.
Height of the triangle = \(\sqrt{9^2 - 4^2} = \sqrt{65} = 8.0622...\) cm
Area = \(\dfrac{1}{2} \times 8 \times 8.0622... = 32.249...\)
Area = 32.2 cm²

Explanation

The front elevation of an upright cone is a triangle whose base is the diameter and whose sloping sides are the slant height. The height of the triangle is the cone's perpendicular height, found with Pythagoras. Do not use the slant height as the height.

Mark scheme
  1. 1 mark

    B1 for the triangle has base 8 cm and sloping sides 9 cm

    Exact values. Base = diameter; correct answer with no working scores full marks

  2. 1 mark

    M1 for height \(= \sqrt{9^2 - 4^2}\) (\(= \sqrt{65}\))

    Exact values. Accept 8.06 or better for the height (8.062...).

  3. 1 mark

    A1 for 32.2

    Accept 32.2 to 32.25 (calculator value 32.249...) or \(4\sqrt{65}\); more accurate answers are accepted. 36 (using 9 as the height) scores B1 M0 A0.

Question 4

4 marks

The diagram shows a tent in the shape of a triangular prism.
Its front elevation is an isosceles triangle with base 2.4 m and height 1.5 m.
Its plan is a rectangle 2.4 m wide and 3.5 m long.

The two sloping sides of the tent are made of fabric.

Calculate the total area of fabric needed for the two sloping sides.
Give your answer correct to 3 significant figures.

A triangular prism drawn in 3D with hidden edges shown as dashed lines. Its end is an isosceles triangle. The base of the triangle is labelled 2.4 m (along the bottom edge of the front triangle). The height of the triangle is labelled 1.5 m (on a dashed line from the top vertex of the front triangle down to its base, at right angles to the base). The length of the prism is labelled 3.5 m (along the bottom edge going back from the front triangle). The diagram is labelled "Not to scale".

Model answer

The front elevation shows the triangle: the height splits the 2.4 m base into two halves of 1.2 m.
Sloping edge = \(\sqrt{1.2^2 + 1.5^2} = \sqrt{3.69} = 1.9209...\) m
The plan shows the tent is 3.5 m long, so each sloping side is a rectangle 1.9209... m by 3.5 m.
Total fabric = \(2 \times 1.9209... \times 3.5 = 13.446...\)
Area = 13.4 m²

Explanation

The front elevation gives the cross-section of the tent and the plan gives its length. Each sloping side is a rectangle whose width is the sloping edge of the triangle, found by Pythagoras using half the base. Remember there are two sloping sides.

Mark scheme
  1. 1 mark

    M1 for \(1.2^2 + 1.5^2\) oe

    Exact values. Half of the base, 1.2 m, and the height, 1.5 m, from the front elevation; correct answer with no working scores full marks

  2. 1 mark

    A1 for the sloping edge 1.92 (1.9209...)

    Accept 1.92 or better, or \(\sqrt{3.69}\).

  3. 1 mark

    M1 for \(2 \times \text{their } 1.92 \times 3.5\)

    The length 3.5 m comes from the plan. Accept their sloping edge as 1.92 or better (1.9209...).

  4. 1 mark

    A1 for 13.4

    Accept 13.4 to 13.45 (calculator value 13.446...); more accurate answers are accepted. 6.72 (one side only) scores M1 A1 M0 A0. 19.8 (using 2.4 instead of 1.2) scores M0 A0 M1 A0.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.