Practise 16 exam-style questions on Compound units for OCR GCSE Maths (Higher calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.
16 questions
2–4 marks each
Instant marking
No sign-up needed
16 questions, marked as you go
Sample questions with model answers
Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.
Question 1
2 marks
A gold bar has a mass of 12.4 kg and a volume of 642.5 cm³.
Work out the density of gold, in g/cm³. Give your answer correct to 3 significant figures.
Model answer
Mass = 12.4 kg = 12 400 g Density = mass ÷ volume = \(12\,400 \div 642.5 = 19.299...\) Density = 19.3 g/cm³ (3 s.f.)
Explanation
Density is mass divided by volume, and the units of the answer follow from the units used: grams ÷ cm³ gives g/cm³. So the mass must be changed from kilograms to grams first.
Mark scheme
1 mark
M1 for \(12\,400 \div 642.5\)
Exact values; 12.4 kg = 12 400 g. \(12.4 \div 642.5 = 0.0193\) scores M0 A0; correct answer with no working scores full marks
1 mark
A1 for 19.3
Accept 19.29 to 19.3 (19.299...). More accurate answers are accepted.
Question 2
3 marks
A snail moves at a steady speed of 0.013 m/s.
Mia says,
'0.013 m/s is the same as 7.8 cm per minute.'
Is Mia correct? Show how you decide.
Model answer
In one minute the snail moves \(0.013 \times 60 = 0.78\) m 0.78 m = \(0.78 \times 100 = 78\) cm So 0.013 m/s = 78 cm per minute. Mia is not correct; she has multiplied by 10 instead of 100 to change metres to centimetres.
Explanation
Change one unit at a time. Multiply by 60 to go from per second to per minute (60 times as far in a minute), then by 100 to change metres to centimetres. Mia's answer is ten times too small.
Mark scheme
1 mark
M1 for \(0.013 \times 60\) or 0.78 (m per minute)
0.013 is an exact value. Or 1.3 cm/s.
1 mark
M1 for their 0.78 × 100, or 1.3 × 60
Exact values.
1 mark
A1 for No, with 78 cm per minute
Or 'No, 7.8 cm per minute is 0.0013 m/s'. 'No' without a correct value scores M1 M1 A0 at most.
Question 3
3 marks
A force of 850 newtons acts on a circular area with radius 12 cm.
pressure = force ÷ area
Work out the pressure, in newtons per square metre (N/m²). Give your answer correct to 3 significant figures.
Model answer
Radius = 12 cm = 0.12 m Area = \(\pi \times 0.12^2 = 0.045238...\) m² Pressure = \(850 \div 0.045238... = 18\,789.1...\) Pressure = 18 800 N/m² (3 s.f.)
Explanation
For pressure in N/m² the area must be in square metres, so change the radius to metres before squaring (or divide the area in cm² by 10 000). Keep the full calculator value of the area: rounding it too early changes the third significant figure.
Mark scheme
1 mark
M1 for area = \(\pi \times 0.12^2\) or 0.0452... (m²)
0.12 is exact. Or area = \(\pi \times 12^2 = 452.3...\) cm² with a later conversion to m² (÷ 10 000). Accept 0.045 to 0.0453 m² or 452 to 452.4 cm²; correct answer with no working scores full marks
1 mark
M1 for \(850 \div\) their area in m²
Their area must be an attempt at a circle area. 850 ÷ 452.39 = 1.88 (area left in cm²) scores M1 M0 A0.
1 mark
A1 for 18 800
Accept 18 780 to 18 800 (18 789.1...). More accurate answers are accepted. Using the area rounded to 0.045 gives 18 900: M1 M1 A0. Using 24 cm as the radius gives 4700: M0 M1 A0.
Question 4
4 marks
Water flows through a pipe at a speed of 0.75 m/s. The pipe is full of water and has a circular cross-section with radius 2 cm.
Work out how many litres of water flow out of the pipe in one minute. Give your answer correct to 3 significant figures.
Model answer
Area of cross-section = \(\pi \times 2^2 = 12.566...\) cm² In one minute the water moves \(0.75 \times 60 = 45\) m = 4500 cm along the pipe. Volume in one minute = \(12.566... \times 4500 = 56\,548.6...\) cm³ 1 litre = 1000 cm³, so volume = 56.548... litres 56.5 litres (3 s.f.)
Explanation
In one minute, the water that flows out fills a cylinder whose length is the distance the water moves in that minute. Volume = cross-section area × length, with every length in the same unit. Then convert cm³ to litres.
Mark scheme
1 mark
M1 for cross-section area \(\pi \times 2^2\) or 12.56... (cm²), or \(\pi \times 0.02^2\) or 0.001256... (m²)
Exact values from the question. Accept 12.5 to 12.6 cm²; correct answer with no working scores full marks
1 mark
M1 for volume per second = their area × 75 (cm³), or volume per minute = their area × 4500 (cm³)
Speed must be converted to match the area units: 0.75 m/s = 75 cm/s, and in one minute the water moves 45 m = 4500 cm. Implied by 942.4... cm³ or 56 548... cm³.
1 mark
M1 for converting their volume to litres (÷ 1000 from cm³, or × 1000 from m³)
1 mark
A1 for 56.5
Accept 56.5 to 56.55 (56.548...). More accurate answers are accepted. 0.942 (litres per second) scores M1 M1 M1 A0. Using diameter 2 cm gives 14.1: M0 M1 M1 A0.
Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.
Ctrl + Enter to check
Study HelperHints first, answers after you try
Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.