Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Maths (Higher calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number Operations and Integers
Unit 2
Fractions, Decimals and Percentages
Unit 3
Indices and Surds
Unit 4
Approximation and Estimation
Unit 5
Ratio, Proportion and Rates of Change
Unit 6
Algebra
Unit 7
Graphs of Equations and Functions
Unit 8
Basic Geometry
Unit 9
Congruence and Similarity
Unit 10
Mensuration
Unit 11
Probability
Unit 12
Statistics
Avg
score:
–
Topics
done:
0/121

Converting units

Practise 14 exam-style questions on Converting units for OCR GCSE Maths (Higher calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 2–4 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Which area is larger, 0.35 m² or 3200 cm²?

Show how you decide.

Model answer

1 m = 100 cm, so 1 m² = 100 × 100 = 10 000 cm²
0.35 m² = 0.35 × 10 000 = 3500 cm²
3500 cm² is more than 3200 cm², so 0.35 m² is larger.

Explanation

A square metre is 100 cm by 100 cm, so it contains 10 000 square centimetres, not 100. Convert both areas to the same unit before comparing.

Mark scheme
  1. 1 mark

    M1 for 1 m² = 10 000 cm² used, e.g. 0.35 m² = 3500 cm² or 3200 cm² = 0.32 m²

    0.35 is an exact value. Converting with 100 (0.35 m² = 35 cm²) scores M0 A0.

  2. 1 mark

    A1 for 0.35 m², with 3500 cm² and 3200 cm² (or 0.35 m² and 0.32 m²) compared

    The correct choice with no working scores 0.

Question 2

2 marks

Amy says,

'2.5 litres is the same as 0.0025 m³.'

Is Amy correct?
Show how you decide.

Model answer

1 litre = 1000 cm³, so 2.5 litres = 2500 cm³
1 m³ = 1 000 000 cm³
2500 cm³ = \(2500 \div 1\,000\,000 = 0.0025\) m³
Yes, Amy is correct.

Explanation

One way is to use 1 m³ = 1000 litres, so 2.5 litres = \(2.5 \div 1000 = 0.0025\) m³. Not every claim in a question is wrong: check it with a full conversion and then state your conclusion.

Mark scheme
  1. 1 mark

    M1 for 2.5 litres = 2500 cm³, with 1 m³ = 1 000 000 cm³ (or 1 m³ = 1000 litres) used

    2.5 is an exact value. Or 0.0025 m³ = 2500 cm³.

  2. 1 mark

    A1 for Yes, with a complete correct conversion, e.g. \(2500 \div 1\,000\,000 = 0.0025\) or \(2.5 \div 1000 = 0.0025\)

    'Yes' with no working scores 0. 'No' scores M1 A0 at most.

Question 3

3 marks

A raindrop has a volume of 0.034 cm³.

Work out how many of these raindrops would fill a volume of 1 m³.
Give your answer in standard form, correct to 3 significant figures.

Model answer

1 m³ = 100 × 100 × 100 = 1 000 000 cm³
Number of raindrops = \(1\,000\,000 \div 0.034 = 29\,411\,764.7...\)
= \(2.94 \times 10^7\) (3 s.f.)

Explanation

A cubic metre is a 100 cm by 100 cm by 100 cm cube, so it holds \(10^6\) cm³. Dividing by the volume of one raindrop gives the number of drops. The common error is to use 1 m³ = 1000 cm³ or 100 cm³.

Mark scheme
  1. 1 mark

    M1 for 1 m³ = 1 000 000 cm³ (or \(10^6\) cm³)

    0.034 is an exact value; correct answer with no working scores full marks

  2. 1 mark

    M1 for \(1\,000\,000 \div 0.034\) oe

    0.034 is an exact value. FT their conversion. Implied by 29 411 764.7...

  3. 1 mark

    A1 for \(2.94 \times 10^7\)

    Accept \(2.94 \times 10^7\) to \(2.942 \times 10^7\) (29 411 764.7...). Answer not in standard form, e.g. 29 400 000, scores M1 M1 A0. \(2.94 \times 10^4\) (1 m³ = 1000 cm³ used) scores M0 M1 A0.

Question 4

4 marks

A rectangle has length \((3x + 20)\) cm and width \(0.4x\) metres.
The area of the rectangle is 6.4 m².

Show that \(x = 20\).

Model answer

Width = \(0.4x\) m = \(40x\) cm
Area = 6.4 m² = \(6.4 \times 10\,000 = 64\,000\) cm²
\(40x(3x + 20) = 64\,000\)
\(120x^2 + 800x - 64\,000 = 0\)
\(3x^2 + 20x - 1600 = 0\)
\((x - 20)(3x + 80) = 0\)
\(x = 20\) or \(x = -\dfrac{80}{3}\)
x is a length, so it cannot be negative: \(x = 20\)

Explanation

The length and width are in different units, so convert one of them first, and convert the area with 1 m² = 10 000 cm². Forming and solving the quadratic gives two roots; the negative one is rejected because it would give a negative width. Simply checking that x = 20 works does not show it is the only answer.

Mark scheme
  1. 1 mark

    M1 for converting to consistent units, e.g. width = 40x cm and area = 64 000 cm², or length = \((0.03x + 0.2)\) m

    The decimals are exact values from the question. Both conversions are needed if working in cm.

  2. 1 mark

    M1 for a correct equation, e.g. \(40x(3x + 20) = 64\,000\) or \(0.4x(0.03x + 0.2) = 6.4\)

    FT their conversions if units are consistent.

  3. 1 mark

    M1 for a correct three-term quadratic, e.g. \(120x^2 + 800x - 64\,000 = 0\) or \(3x^2 + 20x - 1600 = 0\)

    Or \(0.012x^2 + 0.08x - 6.4 = 0\).

  4. 1 mark

    A1 for solving correctly to get \(x = 20\) (and rejecting \(x = -\dfrac{80}{3}\))

    Factorising \((x - 20)(3x + 80) = 0\) or the quadratic formula correctly used. Verification only: substituting x = 20 to show the area is 64 000 cm² = 6.4 m² scores M1 M1 only.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.