Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Maths (Higher calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number Operations and Integers
Unit 2
Fractions, Decimals and Percentages
Unit 3
Indices and Surds
Unit 4
Approximation and Estimation
Unit 5
Ratio, Proportion and Rates of Change
Unit 6
Algebra
Unit 7
Graphs of Equations and Functions
Unit 8
Basic Geometry
Unit 9
Congruence and Similarity
Unit 10
Mensuration
Unit 11
Probability
Unit 12
Statistics
Avg
score:
–
Topics
done:
0/121

Error intervals and bounds

Practise 17 exam-style questions on Error intervals and bounds for OCR GCSE Maths (Higher calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 2–4 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

The length of a nail is 45 mm, correct to the nearest 5 mm.

Write down the error interval for the length, \(L\) mm, of the nail.

Model answer

Half of 5 mm is 2.5 mm.
Lower bound \(= 45 - 2.5 = 42.5\) mm
Upper bound \(= 45 + 2.5 = 47.5\) mm
\(42.5 \leqslant L < 47.5\)

Explanation

When a measurement is given to the nearest 5 mm, the true value is within half of 5 mm, which is 2.5 mm, of the measurement. Lengths from 42.5 mm round up to 45, but 47.5 mm would round to 50, so the upper bound is not included.

Mark scheme
  1. 2 marks

    B2 for \(42.5 \leqslant L < 47.5\)

    B1 for 42.5 and 47.5 with incorrect or no inequality signs, or for one correct bound in a correct inequality, e.g. \(42.5 \leqslant L < 50\). Bounds for the nearest mm (44.5 and 45.5) or nearest 10 mm (40 and 50) score B0.

Question 2

3 marks

The radius of a circle is 6.4 cm, correct to 1 decimal place.

Work out the lower bound of the area of the circle.
Give your answer correct to 1 decimal place.

Model answer

Lower bound of the radius \(= 6.4 - 0.05 = 6.35\) cm
Lower bound of the area \(= \pi \times 6.35^2 = 126.676...\) cm²
\(= 126.7\) cm² (1 d.p.)

Explanation

The area gets smaller as the radius gets smaller, so the lower bound of the area uses the lower bound of the radius. Use the \(\pi\) key and round only at the end. Do not use 6.4 and then subtract a little from the area: the bound must come from the bound of the radius.

Mark scheme
  1. 1 mark

    B1 for 6.35 seen

    Exact lower bound of the radius; correct answer with no working scores full marks

  2. 1 mark

    M1 for \(\pi \times 6.35^2\)

    Exact values; accept 126.67 or better for the result. Or \(\pi \times\) their lower bound squared, where their lower bound is less than 6.4. Implied by 126.67...

  3. 1 mark

    A1 for 126.7

    Exact value 126.676... Accept answers from 126.67 to 126.7 inclusive (more accurate answers are accepted). Using \(\pi = 3.14\) gives 126.6, which scores B1 M1 A0. Common wrong answers: \(\pi \times 6.4^2 = 128.7\) scores B0 M0 A0; \(2 \times \pi \times 6.35 = 39.9\) scores B1 M0 A0.

Question 3

4 marks

The diagram shows a right-angled triangle.

The hypotenuse is 8.5 cm, correct to 1 decimal place.
The angle marked is 32°, correct to the nearest degree.

Work out the upper bound of the length \(x\) cm.
Give your answer correct to 3 significant figures.

Geometry diagram, marked "Not to scale". Triangle PQR. Angle PQR is marked as a right angle (90°). Angle QPR is marked 32°. Side PR is labelled 8.5 cm. Side QR is labelled x cm.

Model answer

\(x\) is opposite the angle, so \(x = 8.5 \sin 32^\circ\)
Upper bound of the hypotenuse \(= 8.55\) cm
Upper bound of the angle \(= 32.5^\circ\)
\(\sin\) increases as the angle increases (for acute angles), so both upper bounds give the largest \(x\).
Upper bound of \(x = 8.55 \times \sin 32.5^\circ = 4.5939...\)
\(= 4.59\) cm (3 s.f.)

Explanation

Use SOH CAH TOA: \(x\) is the side opposite the angle, so \(x = \text{hypotenuse} \times \sin(\text{angle})\). For acute angles \(\sin\) gets bigger as the angle gets bigger, so the largest \(x\) uses the largest hypotenuse and the largest angle. An angle to the nearest degree has bounds half a degree either side.

Mark scheme
  1. 1 mark

    B1 for 8.55 and 32.5 seen

    Exact upper bounds of the hypotenuse and the angle; correct answer with no working scores full marks

  2. 1 mark

    M1 for \(x = 8.5 \sin 32\) oe, or a correct trigonometric method using any values

    e.g. \(\sin 32 = \dfrac{x}{8.5}\). Implied by 4.50... (accept 4.5 or better).

  3. 1 mark

    M1 for \(8.55 \times \sin 32.5\)

    Exact values. Both upper bounds used in a correct trigonometric expression.

  4. 1 mark

    A1 for 4.59

    Exact value 4.5939... Accept answers from 4.59 to 4.594 inclusive (more accurate answers are accepted). Common wrong answers: \(8.55 \sin 32 = 4.53\) scores B0 M1 M0 A0; \(8.55 \cos 32.5 = 7.21\) scores B1 M0 M0 A0. Check the calculator is in degree mode.

Question 4

4 marks

The diagram shows a ladder, AB, leaning against a vertical wall, AC.
The ground, BC, is horizontal.

The ladder is 5.2 m long, correct to 1 decimal place.
The foot of the ladder, B, is 1.4 m from the wall, correct to 1 decimal place.

The top of the ladder, A, is \(h\) m above the ground.

Work out the lower bound of \(h\).
Give your answer correct to 3 significant figures.

Geometry diagram, marked "Not to scale". Triangle CBA. Angle BCA is marked as a right angle (90°). Side BA is labelled 5.2 m. Side CB is labelled 1.4 m. Side CA is labelled h m.

Model answer

By Pythagoras, \(h = \sqrt{(\text{ladder})^2 - (\text{distance from wall})^2}\)
\(h\) is smallest when the ladder is as short as possible and its foot is as far from the wall as possible.
Lower bound of the ladder \(= 5.15\) m; upper bound of the distance \(= 1.45\) m
Lower bound of \(h = \sqrt{5.15^2 - 1.45^2} = \sqrt{26.5225 - 2.1025} = \sqrt{24.42} = 4.9416...\)
\(= 4.94\) m (3 s.f.)

Explanation

The height is found by subtracting squares, so to make it as small as possible take the smallest ladder length and subtract the largest possible distance from the wall. Using the lower bound for both measurements is a common error. Round only the final answer.

Mark scheme
  1. 1 mark

    B1 for 5.15 and 1.45 seen

    Exact bounds: the lower bound of the ladder and the upper bound of the distance from the wall; correct answer with no working scores full marks

  2. 1 mark

    M1 for \(h^2 = 5.2^2 - 1.4^2\) oe, or a correct Pythagoras method with any values

    Implied by \(\sqrt{25.08} = 5.007...\) (accept 5.0 or better).

  3. 1 mark

    M1 for \(\sqrt{5.15^2 - 1.45^2}\) or \(\sqrt{24.42}\)

    Both correct bounds in a correct Pythagoras expression; 24.42 is exact.

  4. 1 mark

    A1 for 4.94

    Exact value 4.9416... Accept answers from 4.94 to 4.942 inclusive (more accurate answers are accepted). Common wrong answers: \(\sqrt{5.15^2 - 1.35^2} = 4.97\) (lower bound of the distance from the wall) scores B0 M1 M0 A0; \(\sqrt{5.15^2 + 1.45^2} = 5.35\) scores B1 M0 M0 A0.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.