Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Maths (Higher calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number Operations and Integers
Unit 2
Fractions, Decimals and Percentages
Unit 3
Indices and Surds
Unit 4
Approximation and Estimation
Unit 5
Ratio, Proportion and Rates of Change
Unit 6
Algebra
Unit 7
Graphs of Equations and Functions
Unit 8
Basic Geometry
Unit 9
Congruence and Similarity
Unit 10
Mensuration
Unit 11
Probability
Unit 12
Statistics
Avg
score:
–
Topics
done:
0/121

Area of rectangles, parallelograms and trapezia

Practise 13 exam-style questions on Area of rectangles, parallelograms and trapezia for OCR GCSE Maths (Higher calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 2–4 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

The diagram shows the end wall of a shed.
The end wall is a trapezium.
The two vertical sides are parallel.

Work out the area of the end wall.

Geometry diagram, marked "Not to scale". A trapezium (its vertices are not labelled) (shaded). The unlabelled side going to the right is labelled 2.6 m. The unlabelled side going upwards is labelled 1.9 m. The unlabelled side going downwards is labelled 2.35 m. The angle at an unlabelled point is marked as a right angle (90°). The angle at an unlabelled point is marked as a right angle (90°). An unlabelled line going upwards and an unlabelled line going upwards are each marked with an arrowhead (parallel lines).

Model answer

Area of a trapezium = \(\dfrac{1}{2}(a + b)h\)
The parallel sides are 2.35 m and 1.9 m, and the distance between them is 2.6 m.
Area = \(\dfrac{1}{2} \times (2.35 + 1.9) \times 2.6\)
= \(\dfrac{1}{2} \times 4.25 \times 2.6\)
= 5.525 m²

Explanation

In this trapezium the parallel sides are the two vertical walls, so the 'height' in the formula is the horizontal width of 2.6 m: the perpendicular distance between the parallel sides. Add the parallel sides, halve, and multiply by that distance. The sloping roof edge is not needed.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{1}{2} \times (2.35 + 1.9) \times 2.6\) oe

    Exact values from the question. Or \(1.9 \times 2.6 + \dfrac{1}{2} \times 0.45 \times 2.6\) (rectangle and triangle); correct answer with no working scores full marks

  2. 1 mark

    A1 for 5.525

    Accept 5.525 m² or 5.53 or 5.52 (exact value 5.525). 11.05 (the half missed out) scores M0 A0.

Question 2

2 marks

A rectangle measures 12.4 cm by 7.5 cm.
A square has the same area as the rectangle.

Show that the length of a side of the square is between 9.6 cm and 9.7 cm.

Model answer

Area of the rectangle = 12.4 × 7.5 = 93 cm²
Side of the square = \(\sqrt{93} = 9.6436...\) cm
9.6436... is between 9.6 and 9.7, so the side of the square is between 9.6 cm and 9.7 cm.

Explanation

The area of a square is side × side, so the side is the square root of the area. Find the area of the rectangle, then take its square root. You could also show that 9.6² = 92.16 is less than 93 and 9.7² = 94.09 is more than 93.

Mark scheme
  1. 1 mark

    M1 for \(12.4 \times 7.5 = 93\)

    The area of the rectangle; exact values from the question.

  2. 1 mark

    A1 for \(\sqrt{93} = 9.64...\) with a conclusion

    Accept 9.64 or better (9.6436...), e.g. '9.64 is between 9.6 and 9.7'. Alternative: \(9.6^2 = 92.16\) and \(9.7^2 = 94.09\), and 93 is between them, scores M1 A1. Answer only scores 0.

Question 3

3 marks

The diagram shows a rectangle ABCD.
The diagonal AC = 15.4 cm and angle BAC = 32°.

Priya says,
"The area of the rectangle is more than 110 cm²."

Is Priya correct?
Show how you decide.

Geometry diagram, marked "Not to scale". Rectangle ABCD (shaded). Line segment AC is drawn. Angle BAC is marked 32°. AC is labelled 15.4 cm. Angle ABC is marked as a right angle (90°).

Model answer

In the right-angled triangle ABC, AC = 15.4 cm is the hypotenuse.
\(AB = 15.4 \cos 32^\circ = 13.059...\) cm
\(BC = 15.4 \sin 32^\circ = 8.160...\) cm
Area = 13.059... × 8.160... = 106.57... cm²
106.6 cm² is less than 110 cm², so Priya is not correct.

Explanation

The diagonal splits the rectangle into two right-angled triangles, so trigonometry gives the length and width: AB is adjacent to the 32° angle and BC is opposite it. Then area = length × width. The area is about 107 cm², which is less than 110 cm².

Mark scheme
  1. 1 mark

    M1 for \(15.4 \cos 32^\circ\) or \(15.4 \sin 32^\circ\)

    AB = 13.06 (accept 13 to 13.1) or BC = 8.16 (accept 8.1 to 8.2).

  2. 1 mark

    M1 for their AB × their BC, with both sides found using trigonometry or Pythagoras

    Or \(15.4 \cos 32^\circ \times 15.4 \sin 32^\circ\).

  3. 1 mark

    A1 for No, with area 106.6 or 107

    Accept 106.5 to 107 (exact value 106.578...) with a correct conclusion, e.g. 'No, 106.6 is less than 110'. 'No' with no working scores 0.

Question 4

4 marks

The diagram shows a trapezium ABCD.
AB is parallel to DC.
Angle DAB = 90°, angle ABC = 52°, AB = 15 cm and BC = 8.4 cm.

Calculate the area of the trapezium.
Give your answer correct to 3 significant figures.

Geometry diagram, marked "Not to scale". Trapezium ABCD (shaded). Angle DAB is marked as a right angle (90°). Angle ABC is marked 52°. Side AB is labelled 15 cm. Side BC is labelled 8.4 cm. AB and DC are each marked with an arrowhead (parallel lines).

Model answer

Draw the perpendicular from C to AB.
Height = \(8.4 \sin 52^\circ = 6.6192...\) cm
Horizontal distance = \(8.4 \cos 52^\circ = 5.1715...\) cm
DC = 15 − 5.1715... = 9.8284... cm
Area = \(\dfrac{1}{2} \times (15 + 9.8284...) \times 6.6192...\)
= 82.173... cm²
= 82.2 cm² (3 s.f.)

Explanation

A perpendicular from C to AB makes a right-angled triangle with hypotenuse BC = 8.4 cm. Its opposite side gives the height of the trapezium and its adjacent side tells you how much shorter DC is than AB. Then use the trapezium area formula, keeping full calculator values to the end.

Mark scheme
  1. 1 mark

    M1 for \(8.4 \sin 52^\circ\)

    The perpendicular height AD; implied by 6.6 or 6.61 to 6.62 (6.6192...); correct answer with no working scores full marks

  2. 1 mark

    M1 for \(8.4 \cos 52^\circ\)

    The horizontal distance from C to AB at B; implied by 5.17 to 5.172 (5.1715...).

  3. 1 mark

    M1 for \(\dfrac{1}{2}(15 + 15 - \text{their } 5.17) \times \text{their } 6.62\) oe

    DC = 9.828... (accept 9.82 to 9.83). Or rectangle \(9.83 \times 6.62\) + triangle \(\dfrac{1}{2} \times 5.17 \times 6.62\) oe.

  4. 1 mark

    A1 for 82.2

    Accept 82.17 to 82.2 (exact value 82.173...); more accurate answers are accepted. Using 6.62 and 9.83 gives 82.19, accepted. Using 6.6 and 9.8 gives 81.8, which scores M1 M1 M1 A0. 99.3 (15 × height, a rectangle) scores M1 M0 M0 A0.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.