Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Using moles to balance equations (HT only)

Practise 10 exam-style questions on Using moles to balance equations (HT only) for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 10 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
10 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

In a reaction, 0.30 mol of substance X reacted completely with 0.10 mol of substance Y to produce 0.20 mol of substance Z.

Write the balanced equation for the reaction.

Model answer

Ratio X : Y : Z = 0.30 : 0.10 : 0.20 = 3 : 1 : 2
3X + Y → 2Z

Explanation

Divide each number of moles by the smallest (0.10) to get the simplest whole number ratio. These whole numbers are the balancing numbers.

Mark scheme
  1. 1 mark

    ratio X : Y : Z = 3 : 1 : 2

  2. 1 mark

    3X + Y → 2Z

    allow ecf from an incorrect ratio

Question 2

3 marks

A student found that 2.4 g of magnesium reacted with 1.6 g of oxygen, O₂, to produce 4.0 g of magnesium oxide, MgO.

Relative atomic masses (Ar): O = 16, Mg = 24

Use these masses to find the balancing numbers and write the balanced equation for the reaction.

Model answer

Moles of Mg = 2.4 ÷ 24 = 0.10 mol
Moles of O₂ = 1.6 ÷ 32 = 0.050 mol
Moles of MgO = 4.0 ÷ 40 = 0.10 mol
Divide by the smallest (0.050): 2 : 1 : 2
2Mg + O₂ → 2MgO

Explanation

The balancing numbers are the simplest whole number ratio of the moles of each substance. Remember that oxygen gas is O₂, so its Mr is 32.

Mark scheme
  1. 1 mark

    moles: Mg = 2.4 ÷ 24 = 0.10; O₂ = 1.6 ÷ 32 = 0.050; MgO = 4.0 ÷ 40 = 0.10

    all three needed

  2. 1 mark

    ratio 0.10 : 0.050 : 0.10 = 2 : 1 : 2

    allow ecf

  3. 1 mark

    2Mg + O₂ → 2MgO

    allow ecf from an incorrect ratio

Question 3

3 marks

Hydrogen burns in oxygen to form water:

2H₂ + O₂ → 2H₂O

In an experiment, 0.50 g of hydrogen reacted with 4.0 g of oxygen to form 4.5 g of water.

Relative atomic masses (Ar): H = 1, O = 16

Show that these masses are consistent with the balancing numbers in the equation.

Model answer

Moles of H₂ = 0.50 ÷ 2 = 0.25 mol
Moles of O₂ = 4.0 ÷ 32 = 0.125 mol
Moles of H₂O = 4.5 ÷ 18 = 0.25 mol
Ratio = 0.25 : 0.125 : 0.25 = 2 : 1 : 2, the same as the balancing numbers in the equation.

Explanation

The balancing numbers in an equation are the mole ratio of the reacting substances, so experimental masses converted to moles should give the same ratio.

Mark scheme
  1. 1 mark

    moles of H₂ = 0.50 ÷ 2 = 0.25 and moles of O₂ = 4.0 ÷ 32 = 0.125

  2. 1 mark

    moles of H₂O = 4.5 ÷ 18 = 0.25

  3. 1 mark

    ratio 0.25 : 0.125 : 0.25 = 2 : 1 : 2, which matches the equation

    allow ecf

Question 4

4 marks

When potassium nitrate, KNO₃, is heated it produces potassium nitrite, KNO₂, and oxygen, O₂. A student heated 20.2 g of potassium nitrate until it had all decomposed. 17.0 g of potassium nitrite was formed.

Relative atomic masses (Ar): N = 14, O = 16, K = 39

Calculate the mass of oxygen produced. Then use the masses to write the balanced equation for the reaction.

Model answer

Mass of oxygen = 20.2 − 17.0 = 3.2 g (conservation of mass)
Mr: KNO₃ = 39 + 14 + 48 = 101; KNO₂ = 39 + 14 + 32 = 85; O₂ = 32
Moles: KNO₃ = 20.2 ÷ 101 = 0.20; KNO₂ = 17.0 ÷ 85 = 0.20; O₂ = 3.2 ÷ 32 = 0.10
Ratio 0.20 : 0.20 : 0.10 = 2 : 2 : 1
2KNO₃ → 2KNO₂ + O₂

Explanation

When one mass is not given, use the law of conservation of mass to find it first. Then convert all the masses to moles and find the simplest whole number ratio.

Mark scheme
  1. 1 mark

    mass of oxygen = 20.2 − 17.0 = 3.2 (g)

  2. 1 mark

    moles: KNO₃ = 20.2 ÷ 101 = 0.20; KNO₂ = 17.0 ÷ 85 = 0.20; O₂ = 3.2 ÷ 32 = 0.10

    allow ecf from an incorrect mass of oxygen

  3. 1 mark

    ratio 2 : 2 : 1

    allow ecf

  4. 1 mark

    2KNO₃ → 2KNO₂ + O₂

    allow ecf

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Using moles to balance equations (HT only)

The big idea

The balancing numbers in a symbol equation are the ratio of the moles of each substance. So if an experiment tells you the masses of the reactants and products, you can work out the balancing numbers: convert each mass in grams to an amount in moles, then turn the amounts into a simple whole number ratio.

The method

  1. Convert each mass to moles: \(\text{moles} = \dfrac{\text{mass}}{M_r}\). Use the formula of the substance as it reacts: oxygen gas is O₂, with an Mr of 32.
  2. Divide every amount by the smallest amount.
  3. If a number is not whole (such as 1.5), multiply all the numbers by the same factor (here 2) to make them whole.
  4. Write the equation with these balancing numbers, then check the atoms on each side.

Never divide the masses by the smallest mass. Equal masses of different substances do not contain equal numbers of particles, because their particles have different masses.

Aluminium in copper chloride solution

Aluminium foil displaces copper from copper(II) chloride solution. 1.08 g of aluminium reacts with 8.07 g of copper(II) chloride (CuCl₂) to form 5.34 g of aluminium chloride (AlCl₃) and 3.81 g of copper. Use the masses to write the balanced equation. Mr: CuCl₂ = 134.5, AlCl₃ = 133.5. Ar: Al = 27, Cu = 63.5

MolesDivide by 0.0400Multiply by 2
Al\(1.08 \div 27 = 0.0400\)12
CuCl₂\(8.07 \div 134.5 = 0.0600\)1.53
AlCl₃\(5.34 \div 133.5 = 0.0400\)12
Cu\(3.81 \div 63.5 = 0.0600\)1.53

2Al + 3CuCl₂ → 2AlCl₃ + 3Cu

Check: Al 2 = 2, Cu 3 = 3, Cl 6 = 6.

A reaction with a missing mass

Magnesium that is already burning keeps burning when it is lowered into carbon dioxide, leaving white magnesium oxide and black specks of carbon. 0.72 g of magnesium reacts with 0.66 g of carbon dioxide to form 1.20 g of magnesium oxide and some carbon. Find the mass of carbon, then write the balanced equation. Mr: CO₂ = 44, MgO = 40. Ar: C = 12, Mg = 24

No atoms are lost or made, so the mass of carbon is \(0.72 + 0.66 - 1.20 = 0.18\) g

Moles:

  • Mg: \(0.72 \div 24 = 0.030\) mol
  • CO₂: \(0.66 \div 44 = 0.015\) mol
  • MgO: \(1.20 \div 40 = 0.030\) mol
  • C: \(0.18 \div 12 = 0.015\) mol

Divide by 0.015 to get the ratio 2 : 1 : 2 : 1

2Mg + CO₂ → 2MgO + C

Check: Mg 2 = 2, C 1 = 1, O 2 = 2.

Changing the subject

You often need to rearrange \(\text{moles} = \dfrac{\text{mass}}{M_r}\):

  • multiply both sides by Mr: \(\text{mass} = \text{moles} \times M_r\)
  • then divide both sides by moles: \(M_r = \dfrac{\text{mass}}{\text{moles}}\)

You can check any rearrangement by putting in simple numbers you already know, such as 2 mol of water (Mr 18) having a mass of 36 g.

Real results

Masses from real experiments rarely give exact whole numbers. Round to the nearest simple ratio: 1 : 1.48 is really 1 : 1.5, which becomes 2 : 3. If a ratio is clearly wrong (such as Cu : O = 1 : 0.75 when the formula CuO needs 1 : 1), look for errors in the experiment: some reactant may not have reacted, or some product may have escaped.

Common mistakes

  • Dividing the masses by the smallest mass instead of converting them to moles first.
  • Using 16 for oxygen gas instead of 32, or 35.5 for chlorine gas instead of 71.
  • Stopping at a ratio such as 1 : 1.5. Balancing numbers must be whole numbers, so multiply by 2.
  • Forgetting to check the final equation by counting the atoms of each element.

Exam tip

Set out the moles of every substance in a row (a small table is ideal), then the ratio, then the equation. An equation written with no working usually earns only one mark, so the moles are where most of the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.