Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Amounts of substances in equations (HT only)

Practise 12 exam-style questions on Amounts of substances in equations (HT only) for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 12 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
12 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Iron oxide reacts with carbon monoxide:

Fe₂O₃ + 3CO → 2Fe + 3CO₂

Describe what this equation shows in terms of moles.

Model answer

One mole of iron oxide, Fe₂O₃, reacts with three moles of carbon monoxide to produce two moles of iron and three moles of carbon dioxide.

Explanation

Chemical equations can be read in moles. A balancing number of 1 is not written, but it still means one mole.

Mark scheme
  1. 1 mark

    1 mole of iron oxide reacts with 3 moles of carbon monoxide

  2. 1 mark

    to produce 2 moles of iron and 3 moles of carbon dioxide

Question 2

3 marks

Magnesium burns in oxygen:

2Mg + O₂ → 2MgO

Calculate the mass of magnesium oxide produced when 6.0 g of magnesium burns completely.

Relative atomic masses (Ar): O = 16, Mg = 24

Model answer

Moles of Mg = 6.0 ÷ 24 = 0.25 mol
From the equation, 2 mol Mg → 2 mol MgO, so moles of MgO = 0.25 mol
Mr of MgO = 24 + 16 = 40
Mass of MgO = 0.25 × 40 = 10 g

Explanation

Reacting mass calculations follow three steps: mass to moles of the known substance, use the equation's ratio to find moles of the unknown, then moles to mass.

Mark scheme
  1. 1 mark

    moles of Mg = 6.0 ÷ 24 = 0.25 (mol)

    an answer of 10 g scores 3 marks

  2. 1 mark

    moles of MgO = 0.25 (mol) (ratio 2 : 2)

    allow ecf

  3. 1 mark

    mass of MgO = 0.25 × 40 = 10 (g)

    allow ecf; allow 10.0 g

Question 3

3 marks

Magnesium reacts with hydrochloric acid:

Mg + 2HCl → MgCl₂ + H₂

Calculate the mass of hydrogen produced when 4.8 g of magnesium reacts with excess hydrochloric acid.

Relative atomic masses (Ar): H = 1, Mg = 24

Model answer

Moles of Mg = 4.8 ÷ 24 = 0.20 mol
From the equation, 1 mol Mg → 1 mol H₂, so moles of H₂ = 0.20 mol
Mr of H₂ = 2 × 1 = 2
Mass of H₂ = 0.20 × 2 = 0.40 g

Explanation

Hydrogen gas is made of H₂ molecules, so its Mr is 2, not 1 - a common mistake. The excess acid means all the magnesium reacts.

Mark scheme
  1. 1 mark

    moles of Mg = 4.8 ÷ 24 = 0.20 (mol)

    an answer of 0.40 g scores 3 marks

  2. 1 mark

    moles of H₂ = 0.20 (mol)

    allow ecf

  3. 1 mark

    mass of H₂ = 0.20 × 2 = 0.40 (g)

    allow 0.4 g; allow ecf; do not accept 0.20 × 1 = 0.20 g

Question 4

4 marks

Calcium carbonate reacts with excess hydrochloric acid:

CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂

A student says: "10 g of calcium carbonate will produce 10 g of calcium chloride, because there is one mole of each in the equation."

Relative atomic masses (Ar): C = 12, O = 16, Cl = 35.5, Ca = 40

Evaluate the student's statement. Use a calculation in your answer.

Model answer

Moles of CaCO₃ = 10 ÷ 100 = 0.10 mol
The student is correct that the mole ratio is 1 : 1, so 0.10 mol of CaCl₂ is produced.
Mr of CaCl₂ = 40 + (2 × 35.5) = 111
Mass of CaCl₂ = 0.10 × 111 = 11.1 g
So the student is wrong: 10 g of calcium carbonate produces 11.1 g of calcium chloride, because one mole of CaCl₂ has a greater mass than one mole of CaCO₃.

Explanation

An equation gives the ratio of moles, not of masses. Equal numbers of moles of different substances have different masses because the substances have different relative formula masses.

Mark scheme
  1. 1 mark

    moles of CaCO₃ = 10 ÷ 100 = 0.10 (mol)

  2. 1 mark

    moles of CaCl₂ = 0.10 (mol) / the student is right that the mole ratio is 1 : 1

  3. 1 mark

    mass of CaCl₂ = 0.10 × 111 = 11.1 (g)

    allow ecf

  4. 1 mark

    the student is wrong because equal numbers of moles have different masses (the Mr values are different: 100 and 111)

    dependent on a calculated mass of CaCl₂

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Amounts of substances in equations (HT only)

The big idea

The balancing numbers in a symbol equation give the ratio of moles of each substance that react and form. Combined with relative formula masses, they let you calculate the mass of any reactant or product from the mass of just one of them. Chemists use this to work out how much starting material they need and how much product to expect.

Reading an equation in moles

Mg + 2HCl → MgCl₂ + H₂

This shows that one mole of magnesium reacts with two moles of hydrochloric acid to produce one mole of magnesium chloride and one mole of hydrogen gas. A formula with no number in front means one mole.

The mass of one mole in grams equals its Mr, so you can also read the equation in grams (Ar: H = 1, Mg = 24, Cl = 35.5):

Mg2HClMgCl₂H₂
Amount in mol1211
Mass in g242 × 36.5 = 73952

The reactants add up to 97 g and so do the products, just as conservation of mass says they must.

Calculating a reacting mass

Three steps work for almost every question:

  1. Change the mass you know into moles: \(\text{moles} = \dfrac{\text{mass}}{M_r}\)
  2. Use the balancing numbers to find the moles of the substance you want.
  3. Change those moles back into a mass: \(\text{mass} = \text{moles} \times M_r\)

Silver from copper

A coil of copper wire is placed in silver nitrate solution, and crystals of silver grow on the wire:

Cu + 2AgNO₃ → Cu(NO₃)₂ + 2Ag

Calculate the mass of silver formed when 1.27 g of copper reacts completely. Ar: Cu = 63.5, Ag = 108

Moles of copper: \(\dfrac{1.27}{63.5} = 0.0200\) mol

The equation shows that 1 mol of Cu gives 2 mol of Ag, so the moles of silver are \(0.0200 \times 2 = 0.0400\) mol

Mass of silver: \(0.0400 \times 108 = 4.32\) g

Working back to a reactant

Calculate the mass of sodium hydroxide needed to neutralise exactly 4.9 g of sulfuric acid.

2NaOH + H₂SO₄ → Na₂SO₄ + 2H₂O

Mr: NaOH = 40, H₂SO₄ = 98

Moles of sulfuric acid: \(\dfrac{4.9}{98} = 0.050\) mol

The equation shows 2 mol of NaOH for every 1 mol of H₂SO₄, so the moles of NaOH are \(0.050 \times 2 = 0.10\) mol

Mass of sodium hydroxide: \(0.10 \times 40 = 4.0\) g

Large masses and the ratio method

Industrial questions often use tonnes (1 tonne = 1 000 000 g). You can change tonnes into grams, or use a mass ratio taken straight from the equation, because the ratio is the same in any unit. For the electrolysis of aluminium oxide:

2Al₂O₃ → 4Al + 3O₂

\(2 \times 102 = 204\) tonnes of aluminium oxide gives \(4 \times 27 = 108\) tonnes of aluminium. So 51 tonnes of aluminium oxide gives \(108 \times \dfrac{51}{204} = 27\) tonnes of aluminium.

Remember

  • The balancing numbers give the ratio of moles, not the ratio of masses.
  • Mass → moles → use the ratio → moles → mass.
  • Conservation of mass gives a quick check: the reactants and the products have the same total mass.

Common mistakes

  • Leaving out the ratio. Always use the balancing numbers of the two substances you are linking.
  • Using the ratio the wrong way round. Write "1 mol Cu gives 2 mol Ag" before you multiply or divide.
  • Multiplying by the balancing number twice: once you have the moles of the substance you want, multiply by the Mr of one formula unit.
  • Using 1 for hydrogen gas or 16 for oxygen gas instead of their Mr values, 2 and 32.
  • Mixing units. Change tonnes or kilograms into grams, or keep the same unit all the way through.

Exam tip

Write the three steps on separate lines with units. A correct final answer usually scores full marks on its own, but a wrong answer with no working scores nothing, while clear working earns method marks. If a question gives you masses in tonnes, give your answer in tonnes.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.