Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Relative formula mass

Practise 11 exam-style questions on Relative formula mass for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 11 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
11 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Calculate the relative formula mass (Mr) of calcium hydroxide, Ca(OH)₂.

Relative atomic masses (Ar): H = 1, O = 16, Ca = 40

Model answer

Mr = 40 + 2 × (16 + 1)
= 40 + 34 = 74

Explanation

The 2 after the bracket multiplies everything inside it, so Ca(OH)₂ contains 1 calcium, 2 oxygen and 2 hydrogen atoms. A common mistake is to add only one hydrogen atom.

Mark scheme
  1. 1 mark

    40 + 2 × (16 + 1)

    an answer of 74 scores 2 marks; allow 40 + 32 + 2

  2. 1 mark

    = 74

Question 2

2 marks

Calcium carbonate decomposes when heated:

CaCO₃ → CaO + CO₂

The relative formula mass (Mr) of CaCO₃ is 100 and the Mr of CO₂ is 44.

Use the equation to calculate the Mr of calcium oxide, CaO.

Model answer

In a balanced equation, the total Mr of the reactants equals the total Mr of the products:
100 = Mr(CaO) + 44
Mr(CaO) = 100 − 44 = 56

Explanation

This uses the idea that the sum of the relative formula masses of the reactants equals the sum for the products in a balanced equation. You can check: 40 + 16 = 56.

Mark scheme
  1. 1 mark

    the Mr of the reactants equals the total Mr of the products, so 100 = Mr of CaO + 44

  2. 1 mark

    Mr of CaO = 56

    allow 100 − 44 = 56 for 2 marks

Question 3

3 marks

Aluminium is extracted from aluminium oxide, Al₂O₃.

Calculate the percentage by mass of aluminium in aluminium oxide.
Give your answer to 3 significant figures.

Relative atomic masses (Ar): O = 16, Al = 27

Model answer

Mr = (2 × 27) + (3 × 16) = 54 + 48 = 102
Percentage of aluminium = 54 ÷ 102 × 100 = 52.94...%
= 52.9% (3 s.f.)

Explanation

Use the total mass of aluminium in the formula (two atoms, 2 × 27 = 54), not just one Ar. Round only at the end.

Mark scheme
  1. 1 mark

    Mr of Al₂O₃ = (2 × 27) + (3 × 16) = 102

    an answer of 52.9(%) scores 3 marks

  2. 1 mark

    54 ÷ 102 × 100 = 52.94...

    allow ecf from an incorrect Mr

  3. 1 mark

    52.9 (%)

    answer to 3 significant figures; allow ecf

Question 4

4 marks

Haematite and magnetite are two iron ores. Haematite contains iron oxide, Fe₂O₃. Magnetite contains iron oxide, Fe₃O₄.

Relative atomic masses (Ar): O = 16, Fe = 56

Which iron oxide contains the greater percentage by mass of iron? Show your working.

Model answer

Fe₂O₃: Mr = (2 × 56) + (3 × 16) = 160; % Fe = 112 ÷ 160 × 100 = 70.0%
Fe₃O₄: Mr = (3 × 56) + (4 × 16) = 232; % Fe = 168 ÷ 232 × 100 = 72.4%
Fe₃O₄ (magnetite) contains the greater percentage by mass of iron.

Explanation

You cannot compare by counting iron atoms alone, because the formulae also contain different numbers of oxygen atoms. Work out each percentage by mass and compare them.

Mark scheme
  1. 1 mark

    Mr Fe₂O₃ = 160 and Mr Fe₃O₄ = 232

    both needed

  2. 1 mark

    % Fe in Fe₂O₃ = 112 ÷ 160 × 100 = 70(.0)%

    allow ecf from an incorrect Mr

  3. 1 mark

    % Fe in Fe₃O₄ = 168 ÷ 232 × 100 = 72.4%

    allow 72%; allow ecf from an incorrect Mr

  4. 1 mark

    Fe₃O₄ / magnetite contains the greater percentage of iron

    dependent on both percentages calculated

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Relative formula mass

The big idea

Every element has a relative atomic mass (Ar), shown on the periodic table. Adding up the Ar values of all the atoms in a formula gives the relative formula mass (Mr) of the substance. Mr lets you compare the masses of different particles, check that an equation is balanced and work out what percentage of a compound's mass comes from one element.

Working out Mr

The relative formula mass of a compound is the sum of the relative atomic masses of the atoms in the numbers shown in the formula. Mr has no units, because it is a relative mass: it compares the masses of particles with each other.

  1. Count the atoms of each element in the formula. A subscript after a bracket multiplies everything inside the bracket.
  2. Multiply each Ar by its number of atoms.
  3. Add the results.

Mr of aluminium nitrate, Al(NO₃)₃

Ar: N = 14, O = 16, Al = 27

Atoms: 1 Al, 3 N and 9 O (the 3 after the bracket multiplies both the N and the O₃)

\(M_r = 27 + (3 \times 14) + (9 \times 16) = 27 + 42 + 144 = 213\)

The same method works for elements made of molecules. Chlorine gas is Cl₂, so its Mr is \(2 \times 35.5 = 71\).

Mr in balanced equations

A balanced equation has the same atoms on both sides, so in the quantities shown, the sum of the Mr values of the reactants equals the sum of the Mr values of the products. Multiply each Mr (or Ar, for an element written as single atoms) by the number in front of its formula. For copper reacting with oxygen (Ar: O = 16, Cu = 63.5):

2Cu + O₂ → 2CuO

  • Reactants: \((2 \times 63.5) + 32 = 127 + 32 = 159\)
  • Products: \(2 \times (63.5 + 16) = 2 \times 79.5 = 159\)

If the two totals are not equal, the equation is not balanced. If one Mr in a balanced equation is unknown, you can find it by subtraction.

Percentage by mass of an element

\[\text{\% by mass} = \dfrac{A_r \times \text{number of atoms}}{M_r \text{ of compound}} \times 100\]

Use the Ar of the element and the number of its atoms in one formula.

The percentage is the same for any sample of the compound, so it is a fair way to compare ores, fertilisers or food supplements that have different formulae.

Calcium in calcium phosphate

Bones and teeth contain calcium phosphate, Ca₃(PO₄)₂. Calculate the percentage by mass of calcium in calcium phosphate. Give your answer to 3 significant figures.

Ar: O = 16, P = 31, Ca = 40

Atoms: 3 Ca, 2 P and 8 O

\(M_r = (3 \times 40) + (2 \times 31) + (8 \times 16) = 120 + 62 + 128 = 310\)

Mass of calcium in the formula: \(3 \times 40 = 120\)

\(\dfrac{120}{310} \times 100 = 38.71\), so the percentage of calcium is 38.7% (3 significant figures)

Working backwards from a percentage

An oxide of element X has the formula XO₂. It contains 50.0% oxygen by mass. Find the Ar of X and identify the element.

Ar: O = 16

Mass of oxygen in the formula: \(2 \times 16 = 32\)

32 is 50.0% of the Mr, so \(M_r = 32 \times \dfrac{100}{50.0} = 64\)

\(A_r\) of X: \(64 - 32 = 32\), so X is sulfur and the oxide is SO₂.

Remember

  • Mr = the sum of the Ar values of all the atoms in the formula. It has no units.
  • In a balanced equation, the total Mr of the reactants equals the total Mr of the products (counting the numbers in front).
  • Percentage by mass = (Ar × number of atoms ÷ Mr) × 100.

Common mistakes

  • Ignoring a bracket: in Al(NO₃)₃ the 3 multiplies both the N and the O, giving 9 oxygen atoms, not 3.
  • Counting only one atom of the element in a percentage, such as using 40 instead of 3 × 40 for the calcium in Ca₃(PO₄)₂.
  • Using Ar 16 for oxygen gas or 1 for hydrogen gas. O₂ has an Mr of 32 and H₂ has an Mr of 2.
  • Dividing the wrong way round. The mass of the element goes on top and the Mr of the whole compound on the bottom.
  • Giving Mr a unit such as g. Mr is a relative mass, so it has no units.

Exam tip

Write out the number of atoms of each element before you add anything up. These questions often give a mark for the working (such as 27 + 42 + 144) even if the final answer slips. Always use the Ar values given in the question, including 35.5 for chlorine and 63.5 for copper.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.