Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Extraction of metals and reduction

Practise 13 exam-style questions on Extraction of metals and reduction for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Zinc can be extracted by heating zinc oxide, ZnO, with carbon. The products are zinc and carbon dioxide.

Write a balanced symbol equation for this reaction.

Model answer

2ZnO + C → 2Zn + CO₂

Explanation

Each carbon atom combines with two oxygen atoms to form CO₂, so two ZnO are needed to supply them. The zinc oxide loses oxygen (reduced) and the carbon gains oxygen (oxidised).

Mark scheme
  1. 1 mark

    ZnO + C → Zn + CO₂ (correct formulae)

  2. 1 mark

    2ZnO + C → 2Zn + CO₂ (correctly balanced)

    allow multiples; ignore state symbols

Question 2

2 marks

This list shows part of the reactivity series, with the most reactive at the top.

potassium
magnesium
carbon
zinc
iron
copper

Which of the metals in the list can be extracted from their oxides by heating with carbon?

Model answer

Zinc, iron and copper.

Explanation

Metals below carbon in the reactivity series are less reactive than carbon, so carbon can remove the oxygen from their oxides. Potassium and magnesium are above carbon, so carbon cannot reduce their oxides.

Mark scheme
  1. 2 marks

    zinc, iron and copper

    all three and no others for 2 marks; two correct and no wrong answers, or all three and one wrong answer, for 1 mark

Question 3

3 marks

A sample of copper ore contains 1.5% copper by mass.

Calculate the mass of copper in 2.0 tonnes of this ore.
Give your answer in kilograms.

1 tonne = 1000 kg

Model answer

Mass of ore = 2.0 tonnes = 2000 kg
Mass of copper = 1.5 ÷ 100 × 2000 = 30 kg

Explanation

1.5% means 1.5 kg of copper in every 100 kg of ore. Most ores contain only a small percentage of metal, so huge amounts of rock must be mined and processed for a small mass of metal.

Mark scheme
  1. 1 mark

    2.0 tonnes = 2000 kg

    an answer of 30 (kg) scores 3 marks

  2. 1 mark

    mass of copper = 1.5 ÷ 100 × 2000

    allow 0.015 × 2000; allow ecf from an incorrect conversion

  3. 1 mark

    30 (kg)

    allow 0.03 tonnes converted correctly; 0.03 with no unit conversion scores 2 marks

Question 4

4 marks

A company wants to extract zinc. It could mine either ore A or ore B. The table gives information about the two ores.

Evaluate which ore the company should mine. Use calculations of the mass of ore needed to produce 1 tonne of zinc in your answer.

Table with columns (row headings), "Ore A", "Ore B". Percentage of zinc by mass; Ore A: 5.0%; Ore B: 12.5% | Position of the ore; Ore A: near the surface; Ore B: deep underground.

Model answer

Mass of ore A needed = 1 ÷ 0.050 = 20 tonnes
Mass of ore B needed = 1 ÷ 0.125 = 8 tonnes
Ore B needs less than half as much rock to be mined, transported and processed for each tonne of zinc, so there is less waste rock and less energy is used. However, ore B is deep underground, which makes mining more difficult and expensive, while ore A is near the surface and easy to dig. Overall I would choose ore B, because it produces 2.5 times as much zinc per tonne of rock, as long as the extra cost of mining deep underground is not too great.

Explanation

An evaluation weighs points for and against each option and ends with a justified conclusion. The percentage of metal in an ore matters because every tonne of rock must be dug up, moved and processed whether it contains much metal or not.

Mark scheme
  1. 1 mark

    ore A: 1 ÷ 0.050 = 20 tonnes of ore

    allow 100 ÷ 5.0 = 20

  2. 1 mark

    ore B: 1 ÷ 0.125 = 8 tonnes of ore

    allow 100 ÷ 12.5 = 8

  3. 1 mark

    ore B needs less than half the mass of ore to be mined, transported and processed / produces less waste rock

    max 4 overall; allow less energy needed to heat / process the ore

  4. 1 mark

    but ore B is deep underground, so mining it is more difficult / costly / dangerous (ore A is near the surface)

  5. 1 mark

    justified conclusion, e.g. ore B, because it needs much less ore per tonne of zinc, if the extra cost of deep mining is less than the saving

    allow a conclusion for ore A if justified by the cost of deep mining

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Extraction of metals and reduction

The big idea

Only very unreactive metals, such as gold, are found in the Earth as the metal itself. Most metals are found as compounds, so chemical reactions are needed to extract them. The method depends on where the metal is in the reactivity series compared with carbon: metals below carbon can be extracted by reduction with carbon.

Where metals are found

An ore is a rock that contains enough of a metal or metal compound to make extracting the metal worthwhile. Gold is so unreactive that it does not combine with oxygen or other elements, so it is found uncombined and only has to be separated from the rock. More reactive metals have combined with elements such as oxygen, so they are found as compounds, often oxides.

Position in the reactivity seriesExamplesHow the metal is obtained
More reactive than carbonpotassium, sodium, calcium, magnesium, aluminiumElectrolysis of the molten compound, which uses a lot of electricity
Less reactive than carbonzinc, iron, tin, lead, copperHeating the oxide with carbon
Very unreactivegold, platinumFound as the metal itself

You do not need to know the details of any industrial process, but you must be able to use information you are given about one.

Reduction with carbon

Reduction is the loss of oxygen. Carbon is more reactive than the metals below it in the series, so when it is heated with one of their oxides it takes the oxygen away:

metal oxide + carbon → metal + carbon dioxide

2ZnO(s) + C(s) → 2Zn(s) + CO₂(g)

  • The zinc oxide loses oxygen, so it is reduced.
  • The carbon gains oxygen, so it is oxidised.

Carbon is the usual choice because:

  • it is cheap and plentiful (as coke, made from coal), and burning some of it supplies the heat needed;
  • the carbon dioxide is a gas, so it escapes and leaves the metal behind.

Carbon cannot extract magnesium or aluminium, because those metals are more reactive than carbon: they hold on to oxygen more strongly than carbon does.

Spotting the substance reduced

In a furnace, carbon burns to form carbon monoxide, CO. The carbon monoxide then reacts with tin(IV) oxide:

SnO₂ + 2CO → Sn + 2CO₂

Identify the substance reduced and the substance oxidised. Explain your answers in terms of oxygen.

  • Tin(IV) oxide loses its oxygen and becomes tin, so tin(IV) oxide is reduced.
  • Carbon monoxide gains oxygen and becomes carbon dioxide, so carbon monoxide is oxidised.

The substance that removes the oxygen does not have to be carbon itself. Always name the reactants: "tin is reduced" would not score, because tin is the product.

Interpreting and evaluating extraction processes

Questions may describe a process you have never met. Use what you know:

  • Is the metal above or below carbon? This decides whether carbon can be used.
  • Apply the definitions to each step. Any substance that loses oxygen is reduced; any substance that gains oxygen is oxidised.
  • Other ways to remove oxygen. Hydrogen, or a metal more reactive than the one being extracted, can also reduce an oxide, but they usually cost more than carbon.
  • Weigh up the process. Compare the energy needed, the cost of raw materials and electricity, how pure the metal is, how much waste rock is dug up (a low percentage of metal in the ore means more), and pollution: carbon dioxide is a greenhouse gas, and sulfur dioxide from sulfide ores causes acid rain.

Remember

  • Reduction is the loss of oxygen; oxidation is the gain of oxygen.
  • Metals less reactive than carbon are extracted by heating their oxides with carbon.
  • Metals more reactive than carbon are extracted by electrolysis.
  • Gold is found as the metal because it is very unreactive.

Common mistakes

  • Naming the metal as the substance reduced. The metal oxide is reduced; the metal is the product.
  • Thinking carbon can extract any metal. It only works for metals below carbon in the reactivity series.
  • Calling a thermal decomposition a reduction. When copper(II) carbonate breaks down into copper(II) oxide and carbon dioxide, the copper compound has not lost oxygen to form a metal.
  • Saying gold is found as the metal because it is rare or valuable. The reason is that it is unreactive.

Exam tip

In "evaluate" questions, use the figures you are given, give at least one advantage and one disadvantage of each method, and finish with a conclusion that follows from your comparison, such as which method you would choose and why.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.