Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Reactions of acids with metals

Practise 10 exam-style questions on Reactions of acids with metals for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 10 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
10 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Magnesium reacts with dilute hydrochloric acid.

Name the salt produced.

Model answer

Magnesium chloride

Explanation

metal + acid → salt + hydrogen. The first part of the salt's name comes from the metal and the second from the acid: hydrochloric acid makes chlorides.

Mark scheme
  1. 1 mark

    magnesium chloride

    allow MgCl₂

Question 2

2 marks

Iron reacts with dilute sulfuric acid, H₂SO₄, to produce iron(II) sulfate, FeSO₄, and hydrogen.

Write a balanced symbol equation for this reaction. Include state symbols.

Model answer

Fe(s) + H₂SO₄(aq) → FeSO₄(aq) + H₂(g)

Explanation

The equation is balanced as written, because iron forms Fe²⁺ ions and sulfate ions are SO₄²⁻. The salt dissolves in water, so it is (aq), and hydrogen is a gas (g).

Mark scheme
  1. 1 mark

    Fe + H₂SO₄ → FeSO₄ + H₂

  2. 1 mark

    state symbols: Fe(s), H₂SO₄(aq), FeSO₄(aq), H₂(g)

    all four needed

Question 3

3 marks

Iron reacts with dilute hydrochloric acid.

Fe + 2HCl → FeCl₂ + H₂

Write the ionic equation for this reaction. Name the ion that does not take part in the reaction.

Model answer

Fe + 2H⁺ → Fe²⁺ + H₂
The chloride ion, Cl⁻, does not take part (spectator ion).

Explanation

Hydrochloric acid contains H⁺ and Cl⁻ ions, and iron(II) chloride solution contains Fe²⁺ and Cl⁻ ions. The chloride ions are unchanged, so they are left out of the ionic equation.

Mark scheme
  1. 1 mark

    Fe + H⁺ → Fe²⁺ + H₂ (correct species)

  2. 1 mark

    Fe + 2H⁺ → Fe²⁺ + H₂ (balanced)

    ignore state symbols; do not accept if chloride ions are included

  3. 1 mark

    chloride ion / Cl⁻

Question 4

3 marks

The reaction of zinc with hydrochloric acid and the reaction of zinc with sulfuric acid produce different salts.

Explain why both reactions can be represented by the same ionic equation. Write the ionic equation.

Model answer

Both acids produce hydrogen ions, H⁺, in aqueous solution, and it is the hydrogen ions that react with the zinc. The chloride ions and sulfate ions are spectator ions that do not change, so they are left out.
Zn + 2H⁺ → Zn²⁺ + H₂

Explanation

The different salts (zinc chloride and zinc sulfate) come from the different negative ions in the acids, but those ions are unchanged. In both reactions zinc atoms are oxidised to Zn²⁺ and hydrogen ions are reduced to H₂.

Mark scheme
  1. 1 mark

    both acids produce hydrogen ions / H⁺ in solution

  2. 1 mark

    the chloride and sulfate ions do not take part / are spectator ions

    allow only the hydrogen ions react with the zinc

  3. 1 mark

    Zn + 2H⁺ → Zn²⁺ + H₂

    ignore state symbols

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Reactions of acids with metals

The big idea

Acids react with some metals to produce a salt and hydrogen. You need to know the reactions of magnesium, zinc and iron with hydrochloric acid and sulfuric acid. How fast each metal reacts depends on how reactive it is.

Salt + hydrogen

metal + acid → salt + hydrogen

The first part of the salt's name comes from the metal and the second part from the acid: hydrochloric acid makes chlorides and sulfuric acid makes sulfates.

MetalSalt with hydrochloric acidSalt with sulfuric acidHow fast?
Magnesiummagnesium chloride, MgCl₂magnesium sulfate, MgSO₄fast, vigorous fizzing
Zinczinc chloride, ZnCl₂zinc sulfate, ZnSO₄steady fizzing
Ironiron(II) chloride, FeCl₂iron(II) sulfate, FeSO₄slow, a few bubbles

All three metals form 2+ ions, so their equations follow the same pattern. For iron:

Fe(s) + 2HCl(aq) → FeCl₂(aq) + H₂(g)

Fe(s) + H₂SO₄(aq) → FeSO₄(aq) + H₂(g)

The speed of the reaction follows the reactivity series. Magnesium has the greatest tendency to form positive ions of the three, so it reacts fastest; iron has the smallest, so it reacts slowest. Metals below hydrogen in the reactivity series, such as copper, do not react with dilute acids at all.

What you see and the test for hydrogen

When one of these metals is added to a dilute acid, you may see:

  • fizzing (bubbles of gas);
  • the metal gets smaller and may disappear;
  • the tube gets warm, because the reaction is exothermic;
  • a colourless solution forms with magnesium and zinc, but iron gives a pale green solution, the colour of iron(II) ions.

To test for hydrogen, hold a lighted splint at the mouth of the tube: the hydrogen burns with a squeaky pop.

Explaining observations

An iron nail is left in dilute sulfuric acid. After an hour there are a few bubbles on the nail and the solution has turned pale green. Explain these observations.

  • The bubbles are hydrogen, released as the iron reacts with the acid.
  • The pale green colour comes from iron(II) sulfate, the salt, which dissolves to give iron(II) ions.
  • The reaction is slow because iron is only a little above hydrogen in the reactivity series: it has a much smaller tendency to form positive ions than magnesium or zinc.

iron + sulfuric acid → iron(II) sulfate + hydrogen

Higher tier only

Redox in terms of electrons. In these reactions the metal atoms lose electrons and the hydrogen ions from the acid gain them. Electrons are transferred from one species to another, so these are redox reactions. For magnesium:

  • Mg → Mg²⁺ + 2e⁻: magnesium atoms lose electrons, so magnesium is oxidised.
  • 2H⁺ + 2e⁻ → H₂: hydrogen ions gain electrons, so hydrogen ions are reduced.

Adding the half equations gives the ionic equation Mg + 2H⁺ → Mg²⁺ + H₂. The chloride or sulfate ions are spectator ions: they are in solution before and after the reaction and are neither oxidised nor reduced, so a metal has the same ionic equation with either acid. Say that the hydrogen ions (H⁺) are reduced, not "hydrogen", which is the product, and not the chloride ions.

Worked example: aluminium forms Al³⁺ ions. Write the ionic equation for its reaction with hydrochloric acid and identify the species reduced.

Al → Al³⁺ + 3e⁻ and 2H⁺ + 2e⁻ → H₂. To make the electrons lost equal the electrons gained (6 each), double the first and triple the second:

2Al + 6H⁺ → 2Al³⁺ + 3H₂

The charge is 6+ on each side. The hydrogen ions are reduced, because they gain electrons.

Common mistakes

  • Giving "hydrogen is produced" as an observation. Write what you can see: fizzing.
  • Testing for hydrogen with a glowing splint. That is the test for oxygen; use a lighted splint.
  • Naming the salt from sulfuric acid as a sulfide or sulfite. Sulfuric acid makes sulfates.
  • Writing hydrogen as H in an equation. Hydrogen gas is made of H₂ molecules.
  • Writing iron(III) chloride for the salt. Iron and dilute hydrochloric acid give iron(II) chloride, FeCl₂.

Exam tip

For "describe what you would observe" questions, give things you could see, hear or feel. "Fizzing", "the magnesium disappears" and "the tube gets warm" score; naming the gas does not count as an observation.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.