Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Strong and weak acids (HT only)

Practise 14 exam-style questions on Strong and weak acids (HT only) for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A solution has a pH of 5. The hydrogen ion concentration of the solution is then increased by a factor of 100.

What is the new pH of the solution?

Model answer

pH 3

Explanation

A factor of 100 is 10 × 10, which is two pH units. More hydrogen ions means a lower pH, so the pH falls from 5 to 3.

Mark scheme
  1. 1 mark

    3

    do not accept 7 or 500

Question 2

2 marks

A student measured the pH of solutions of three acids, J, K and L. All three solutions had the same concentration. The table shows the results.

Which acid is the strongest? Explain your answer.

Table with columns "Acid", "pH". Acid: J; pH: 4 | Acid: K; pH: 1 | Acid: L; pH: 3.

Model answer

Acid K is the strongest. All the solutions have the same concentration, so the acid with the lowest pH is the one that is most ionised and releases the most hydrogen ions.

Explanation

pH can only be used to compare acid strength when the concentrations are the same. Then a lower pH means a higher hydrogen ion concentration, which means a greater degree of ionisation.

Mark scheme
  1. 1 mark

    K

  2. 1 mark

    it has the lowest pH, so it has the highest concentration of hydrogen ions / is the most ionised (at the same concentration)

    allow for the same concentration, the stronger the acid the lower the pH

Question 3

3 marks

A student says: "Concentrated ethanoic acid must be a strong acid."

Explain why the student is wrong.

Model answer

Concentrated describes the amount of acid dissolved in a given volume of solution, whereas strong describes the degree of ionisation. Ethanoic acid is only partially ionised in water, however much of it is dissolved, so it is a weak acid even when it is concentrated.

Explanation

Concentration and strength are independent: you can have a concentrated weak acid or a dilute strong acid. Strength depends only on what fraction of the acid molecules ionise.

Mark scheme
  1. 1 mark

    concentrated means there is a large amount of acid in a given volume (of solution)

  2. 1 mark

    strong means the acid is completely ionised (in aqueous solution)

  3. 1 mark

    ethanoic acid is only partially ionised (at any concentration), so it is a weak acid even when concentrated

    allow concentration and strength are different properties

Question 4

4 marks

Solutions of hydrochloric acid and ethanoic acid have the same concentration. The hydrochloric acid has a pH of 1. The ethanoic acid has a pH of 3.

Explain why the two acids have different pH values. Determine how many times greater the hydrogen ion concentration is in the hydrochloric acid.

Model answer

Hydrochloric acid is a strong acid, so it is completely ionised in water. Ethanoic acid is a weak acid, so only some of its molecules ionise. With the same concentration of acid, the hydrochloric acid therefore has a much higher concentration of hydrogen ions, so its pH is lower.
The pH differs by 2 units, so the hydrogen ion concentration in the hydrochloric acid is 10 × 10 = 100 times greater.

Explanation

For a given concentration, the stronger the acid, the lower the pH, because more of the acid has released hydrogen ions. Each pH unit is a factor of 10 in hydrogen ion concentration.

Mark scheme
  1. 1 mark

    hydrochloric acid is a strong acid so it is completely ionised

  2. 1 mark

    ethanoic acid is a weak acid so it is only partially ionised

  3. 1 mark

    so the hydrochloric acid has a higher concentration of hydrogen ions (and a lower pH)

  4. 1 mark

    100 times greater

    allow 10²; do not accept 2 or 3 times

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Strong and weak acids (HT only)

The big idea

"Strong" and "concentrated" do not mean the same thing. Strong and weak describe how much of an acid ionises in water to release hydrogen ions. Concentrated and dilute describe how much acid is dissolved in a given volume. Both affect the concentration of hydrogen ions, and so both affect the pH.

Strong and weak acids

A strong acid is completely ionised in aqueous solution: every molecule releases its hydrogen ions. You need to know three strong acids: hydrochloric, nitric and sulfuric acids. A one-way arrow shows that the ionisation is complete:

HCl(aq) → H⁺(aq) + Cl⁻(aq)

A weak acid is only partially ionised in aqueous solution: at any moment only a small fraction of its molecules have released hydrogen ions, and the rest stay as molecules. Examples are ethanoic acid (in vinegar), citric acid (in citrus fruits) and carbonic acid (in fizzy drinks). The reversible arrow ⇌ shows that the ionisation reaches an equilibrium:

CH₃COOH(aq) ⇌ CH₃COO⁻(aq) + H⁺(aq)

Concentrated and dilute

The concentration of an acid is the amount of acid (in moles) dissolved in each dm³ of solution, measured in mol/dm³. A concentrated acid has a lot of acid in each dm³ and a dilute acid has only a little. Any acid can be made at any concentration, so all four combinations exist:

Strong acidWeak acid
Concentrated2 mol/dm³ hydrochloric acid2 mol/dm³ ethanoic acid
Dilute0.01 mol/dm³ hydrochloric acid0.01 mol/dm³ ethanoic acid

Adding water makes an acid more dilute, but it does not change its strength: dilute hydrochloric acid is still completely ionised.

pH and hydrogen ion concentration

pH is a measure of the hydrogen ion concentration: the higher the H⁺ concentration, the lower the pH. A neutral solution, pH 7, has equal concentrations of H⁺ and OH⁻ ions. An acidic solution has more H⁺ than OH⁻, so its pH is below 7.

The scale goes up and down in factors of 10. As the pH decreases by one unit, the hydrogen ion concentration increases by a factor of 10:

pHH⁺ concentration compared with a solution at pH 7
71 times
610 times
5100 times
41000 times
310 000 times

For acids of the same concentration, the stronger acid releases more hydrogen ions, so it has the lower pH.

Strength changes how fast an acid reacts, but not how much it can react. At the same concentration, a weak acid fizzes more slowly with magnesium or a carbonate, because its lower H⁺ concentration gives less frequent collisions. But as its hydrogen ions are used up, more of its molecules ionise. So in the end a weak acid makes as much product as the same amount of a strong acid like hydrochloric acid, and needs as much alkali to neutralise it.

Describing acids in context

Car battery acid is about 5 mol/dm³ sulfuric acid. Vinegar contains about 0.8 mol/dm³ ethanoic acid. Describe each acid using the words strong or weak and concentrated or dilute, and explain which one has the lower pH.

  • Battery acid: sulfuric acid is completely ionised, so it is a strong acid. At 5 mol/dm³ there is a lot of acid in each dm³, so it is concentrated.
  • Vinegar: ethanoic acid is only partially ionised, so it is a weak acid. At 0.8 mol/dm³ it is much more dilute than the battery acid.
  • Lower pH: the battery acid. It has more acid in each dm³, and far more of that acid is ionised, so its hydrogen ion concentration is much higher.

Remember

  • Strong acid: completely ionised (hydrochloric, nitric, sulfuric).
  • Weak acid: partially ionised (ethanoic, citric, carbonic).
  • Concentrated or dilute: the amount of acid in a given volume.
  • One pH unit lower means 10 times the hydrogen ion concentration.

Common mistakes

  • Using "strong" to mean concentrated, or "weak" to mean dilute. Strength is about the degree of ionisation; concentration is about the amount of acid per dm³.
  • Thinking a drop of one pH unit doubles the hydrogen ion concentration. It multiplies it by 10, and a drop of two units multiplies it by 100.
  • Writing a one-way arrow for a weak acid's ionisation. Weak acids need ⇌; strong acids use →.
  • Saying a strong acid is "more concentrated" when you mean it has a higher concentration of hydrogen ions. Say exactly that.
  • Writing "more collisions" when explaining a faster reaction. Say more frequent collisions (more collisions per second).

Exam tip

When explaining why two acids have different pH values, always mention the hydrogen ion concentration, and say whether the difference comes from strength (how much of the acid is ionised), from concentration (how much acid is in each dm³) or from both. For pH changes, count the pH units and multiply by 10 for each one.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.