Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Electrolysis of molten ionic compounds

Practise 11 exam-style questions on Electrolysis of molten ionic compounds for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 11 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
11 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Molten calcium chloride is electrolysed using inert electrodes.

Predict the product formed at each electrode.

Model answer

Calcium is formed at the cathode (negative electrode) and chlorine is formed at the anode (positive electrode).

Explanation

Calcium chloride contains Ca²⁺ and Cl⁻ ions. The positive calcium ions go to the negative electrode and form calcium metal; the negative chloride ions go to the positive electrode and form chlorine gas. Remember the element is chlorine, not chloride.

Mark scheme
  1. 1 mark

    cathode / negative electrode: calcium

  2. 1 mark

    anode / positive electrode: chlorine

    do not accept chloride

Question 2

2 marks

Molten lithium chloride is electrolysed. These half equations are incomplete:

Li⁺ + ___ → Li
Cl⁻ → Cl₂ + ___

Write the two completed, balanced half equations.

Model answer

Li⁺ + e⁻ → Li
2Cl⁻ → Cl₂ + 2e⁻

Explanation

A 1+ ion needs one electron to become an atom. Chlorine forms Cl₂ molecules, so two chloride ions are needed, and they release two electrons in total.

Mark scheme
  1. 1 mark

    Li⁺ + e⁻ → Li

  2. 1 mark

    2Cl⁻ → Cl₂ + 2e⁻

    do not accept Cl⁻ → Cl₂ + 2e⁻ (not balanced)

Question 3

3 marks

Molten lead bromide, PbBr₂, is electrolysed.

Write half equations for the reactions at the cathode and at the anode.

Model answer

Cathode: Pb²⁺ + 2e⁻ → Pb
Anode: 2Br⁻ → Br₂ + 2e⁻

Explanation

At the cathode, each lead ion gains two electrons to form a lead atom. At the anode, two bromide ions each lose one electron to form one Br₂ molecule. Check that charge balances on both sides of each half equation.

Mark scheme
  1. 1 mark

    cathode: Pb²⁺ + 2e⁻ → Pb

  2. 1 mark

    anode: Br⁻ → Br₂ + e⁻ (correct species, electrons on the right)

    allow Br⁻ − e⁻ → Br₂ for this mark

  3. 1 mark

    anode: 2Br⁻ → Br₂ + 2e⁻ (balanced)

    allow 2Br⁻ − 2e⁻ → Br₂; if the two half equations are given at the wrong electrodes, max 2

Question 4

4 marks

A teacher demonstrates the electrolysis of molten lead bromide by heating it strongly in a crucible.

Identify two hazards in this demonstration and describe how the risk from each one can be reduced.

Model answer

Hazard 1: bromine vapour is toxic. The demonstration should be done in a fume cupboard so the vapour is removed.
Hazard 2: the crucible and molten lead bromide are very hot and could cause burns. Use tongs and leave everything to cool before it is touched.

Explanation

The products of electrolysis can themselves be hazardous: here bromine is toxic and corrosive, and lead is toxic. Each control measure should reduce the risk from the hazard it is paired with.

Mark scheme
  1. 1 mark

    bromine (vapour) is toxic / corrosive

    max 2 hazards

  2. 1 mark

    carry out the demonstration in a fume cupboard

    allow well-ventilated room

  3. 1 mark

    the crucible / molten lead bromide is very hot and can cause burns

  4. 1 mark

    use tongs / a heat-proof mat / leave to cool before handling

  5. 1 mark

    lead compounds / lead are toxic

  6. 1 mark

    wear gloves / wash hands / do not touch the chemicals

    max 2 control measures; each control measure must match its hazard

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Electrolysis of molten ionic compounds

The big idea

When a simple ionic compound made of just two elements (a binary ionic compound) is melted and electrolysed, it splits into those two elements. The metal forms at the cathode (negative electrode) and the non-metal forms at the anode (positive electrode). This one rule lets you predict the products for any molten binary ionic compound.

Why the compound must be molten

In a solid ionic compound the ions are held in fixed positions in a lattice, so they cannot move to the electrodes. Melting frees the ions, so they can move, carry the current and be discharged. Ionic compounds have high melting points, so a lot of energy is needed to melt them.

Electrolysing molten lead bromide

Lead bromide, PbBr₂, is used to demonstrate this because, for an ionic compound, it melts at a fairly low temperature (about 370 °C). The electrodes are inert: graphite, which does not react with the electrolyte or the products.

Diagram of electrolysis of a molten compound. "graphite cathode (−)" labels the left electrode, connected to the negative terminal; "graphite anode (+)" labels the right electrode, connected to the positive terminal; "molten lead bromide" labels the liquid in the container; "crucible" labels the container holding the liquid; "d.c. power supply" labels the power supply symbol at the top.
Lead bromide is heated in a crucible until it melts, then a current is passed through it.
  • While the lead bromide is solid, a bulb in the circuit does not light: the ions cannot move.
  • Once it melts, the bulb lights: the ions are free to move, so the molten compound conducts.
  • Lead ions, Pb²⁺, are positive, so they move to the cathode. They gain electrons and form lead, a silvery liquid metal that collects at the bottom of the crucible.
  • Bromide ions, Br⁻, are negative, so they move to the anode. They lose electrons and form bromine, seen as brown fumes (bromine boils at only 59 °C).
  • Bromine vapour is toxic, and so are lead compounds, so the demonstration is done in a fume cupboard.

Molten lead bromide contains only Pb²⁺ and Br⁻ ions and no water, so lead and bromine are the only possible products.

Predicting the products

For a molten binary ionic compound with inert electrodes:

  • Cathode (−): the metal.
  • Anode (+): the non-metal. Name the element, not the ion: chloride ions form chlorine, bromide ions form bromine, iodide ions form iodine and oxide ions form oxygen. All four are made of diatomic molecules (Cl₂, Br₂, I₂, O₂).
Molten compoundIons presentProduct at the cathodeProduct at the anode
Sodium bromide, NaBrNa⁺ and Br⁻sodiumbromine
Calcium iodide, CaI₂Ca²⁺ and I⁻calciumiodine
Lithium oxide, Li₂OLi⁺ and O²⁻lithiumoxygen
Barium chloride, BaCl₂Ba²⁺ and Cl⁻bariumchlorine

Always decide using the charge on each ion: positive ions go to the cathode and negative ions go to the anode.

Predicting products and their states

Molten zinc chloride, ZnCl₂, is electrolysed at 450 °C using graphite electrodes. Use the data to name the product at each electrode and predict its state.

SubstanceMelting point in °CBoiling point in °C
Zinc chloride290732
Zinc420907
Chlorine−101−34

Step 1, the ions: zinc chloride contains Zn²⁺ and Cl⁻ ions.

Step 2, the products: the positive zinc ions move to the cathode and form zinc; the negative chloride ions move to the anode and form chlorine.

Step 3, the states: 450 °C is above the melting point of zinc but below its boiling point, so zinc forms as a liquid. 450 °C is far above the boiling point of chlorine, so chlorine forms as a gas and bubbles off.

Higher tier only

Half equations and redox. At the cathode, positive ions gain electrons, so they are reduced. At the anode, negative ions lose electrons, so they are oxidised. For molten lead bromide:

  • Cathode: Pb²⁺ + 2e⁻ → Pb
  • Anode: 2Br⁻ → Br₂ + 2e⁻ (or 2Br⁻ − 2e⁻ → Br₂)

The number of electrons matches the charges: each Pb²⁺ ion gains two electrons, and two Br⁻ ions each lose one electron to make one Br₂ molecule.

Remember

  • Molten binary ionic compound: metal at the cathode, non-metal at the anode.
  • Molten lead bromide gives lead (a silvery liquid) at the cathode and bromine (brown fumes) at the anode.
  • The compound must be molten so that its ions can move.

Common mistakes

  • Writing "chloride" or "bromide" as the product at the anode. That is the ion; the element produced is chlorine or bromine.
  • Naming "lead ions" or "lead bromide" as the product at the cathode. The product is the element, lead.
  • Saying solid lead bromide does not conduct because the electrons cannot move. It is the ions that are in fixed positions.
  • Saying the fume cupboard is needed because the experiment is hot. It is needed because bromine vapour is toxic.
  • Predicting hydrogen or oxygen from a molten compound such as sodium chloride. There is no water, so only the two elements in the compound can form.

Exam tip

"Predict" questions want the name of each product and the electrode it forms at. Adding the reason ("the metal ions are positive, so they are attracted to the negative cathode") often earns an extra mark.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.