Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Development of the periodic table

Practise 13 exam-style questions on Development of the periodic table for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Early periodic tables arranged the elements in order of atomic weight, not atomic number.

Explain why early scientists could not arrange the elements in order of atomic number.

Model answer

Atomic number is the number of protons in an atom. Protons, neutrons and electrons had not yet been discovered, so scientists had no way of knowing the atomic numbers of the elements.

Explanation

Scientists can only use the evidence available at the time. Once the structure of the atom was known, the periodic table could be arranged by atomic number, which explained the problems with the order based on atomic weights.

Mark scheme
  1. 1 mark

    protons (electrons and neutrons) had not been discovered

  2. 1 mark

    atomic number is the number of protons, so it could not be known / measured

Question 2

2 marks

Mendeleev left a gap below aluminium in his periodic table. The gap was later filled by gallium, Ga. The formula of aluminium oxide is Al₂O₃.

Predict the formula of gallium oxide. Give a reason for your prediction.

Model answer

Ga₂O₃, because gallium is in the same group as aluminium, so it has similar chemical properties and forms compounds with similar formulae.

Explanation

This is exactly how Mendeleev made his predictions: he used the properties of the elements around each gap. When gallium was discovered, its properties matched his predictions closely.

Mark scheme
  1. 1 mark

    Ga₂O₃

  2. 1 mark

    gallium is in the same group as aluminium, so it has similar properties / forms similar compounds

    allow same number of outer electrons

Question 3

3 marks

The table shows part of an early periodic table. The elements were arranged in the strict order of their atomic weights, in rows of seven.

Use the table to describe two problems with this early periodic table.

Table with columns "Column 1", "Column 2", "Column 3", "Column 4", "Column 5", "Column 6", "Column 7". Column 1: H; Column 2: Li; Column 3: Be; Column 4: B; Column 5: C; Column 6: N; Column 7: O | Column 1: F; Column 2: Na; Column 3: Mg; Column 4: Al; Column 5: Si; Column 6: P; Column 7: S | Column 1: Cl; Column 2: K; Column 3: Ca; Column 4: Cr; Column 5: Ti; Column 6: Mn; Column 7: Fe.

Model answer

Iron, a metal, is in the same column as oxygen and sulfur, which are non-metals, so a column contains elements with very different properties. This happened because the strict order of atomic weights was followed and no gaps were left for elements that had not yet been discovered.

Explanation

Following atomic weight strictly works for the first few rows, but soon forces elements into columns where they do not belong. Mendeleev avoided this by leaving gaps and changing the order where the properties did not fit.

Mark scheme
  1. 1 mark

    iron (a metal) is in the same column as oxygen and sulfur (non-metals) / some elements are in a column with elements that have different properties

    max 3; allow manganese with nitrogen and phosphorus; allow hydrogen with fluorine and chlorine

  2. 1 mark

    elements in the same column should have similar properties, but these do not

  3. 1 mark

    no gaps were left for undiscovered elements / the table is incomplete

  4. 1 mark

    this happens because the strict order of atomic weights was followed

Question 4

4 marks

Compare Mendeleev's periodic table with the modern periodic table.

Model answer

Both tables put elements with similar properties into the same groups. Mendeleev arranged the elements mainly by atomic weight, but changed the order in some places and left gaps for undiscovered elements. The modern table is arranged by atomic number, so the order never needs to be changed, and the gaps have been filled by elements discovered since. The modern table can be explained by electronic structure: elements in a group have the same number of outer electrons.

Explanation

When comparing, make each point about both tables. The key change is from atomic weight to atomic number, which only became possible after protons were discovered, and which explained why Mendeleev's swaps were correct.

Mark scheme
  1. 1 mark

    Mendeleev's table was based on atomic weights; the modern table is in order of atomic number

    max 4; each point must refer to both tables

  2. 1 mark

    Mendeleev changed the order of some elements; in the modern table the order of atomic number is never broken

  3. 1 mark

    Mendeleev's table had gaps for undiscovered elements; in the modern table these gaps have been filled

  4. 1 mark

    both group elements with similar properties in columns / groups

  5. 1 mark

    the modern table can be explained by electronic structure (outer electrons); Mendeleev could not explain why the pattern happened

    allow Mendeleev's table had no Group 0 / noble gases

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Development of the periodic table

The big idea

The periodic table took many years to develop. Early scientists arranged the elements by atomic weight, because protons, neutrons and electrons had not been discovered. Their tables had problems, which Mendeleev overcame by leaving gaps and changing the order where the properties did not fit. When the elements he predicted were found, and later when atomic numbers and isotopes were understood, his approach was shown to be right.

Early tables

Before protons, neutrons and electrons were discovered, scientists sorted the elements by listing them in order of their atomic weights (today called relative atomic masses). Atomic weights could be measured, but nobody knew about atomic numbers.

The early periodic tables had two big problems:

  • they were incomplete, because many elements had not yet been discovered and no spaces were left for them;
  • if the strict order of atomic weights was followed, some elements were placed in inappropriate groups, next to elements with very different properties. One early table put the metals cobalt and nickel in the same group as the halogens.

Mendeleev's table

In 1869 Mendeleev published a table that put chemical properties first:

  • he left gaps for elements that he thought had not been discovered, so that elements with similar properties stayed in the same group;
  • in some places he changed the order based on atomic weights. He put tellurium (atomic weight 128) before iodine (127), so that iodine sat with chlorine and bromine, which it resembles;
  • he used the elements around each gap to predict the properties of the missing elements.

Elements with the properties Mendeleev predicted were discovered and filled the gaps: gallium (1875), scandium (1879) and germanium (1886). Their properties were very close to his predictions. Some scientists had doubted the table because of its gaps and swaps, but successful predictions are strong evidence that a scientific idea is right, so the table became accepted.

His table had no noble gases. They are unreactive, colourless and odourless, so they were only discovered in the 1890s, when they were added as a new group.

How a gap can be predicted

Mendeleev left a gap between calcium (atomic weight 40.1) and titanium (47.9). Estimate the atomic weight of the missing element.

A simple estimate is the mean of its two neighbours:

\(\dfrac{40.1 + 47.9}{2} = 44.0\)

Mendeleev predicted 44 for this element. Scandium, discovered in 1879, has a relative atomic mass of 45.0, very close to the prediction. He made his predictions in a similar way, using the trends in the elements around each gap.

Atomic numbers and isotopes

After the proton was discovered, the elements were arranged in order of atomic number, the number of protons. Then every element falls into the group that matches its properties and no swaps are needed: tellurium (atomic number 52) does come before iodine (53), just as Mendeleev had decided.

Knowledge of isotopes made it possible to explain why the order based on atomic weights was not always correct. Relative atomic mass is an average that depends on the masses and abundances of an element's isotopes. Tellurium has a high proportion of heavy isotopes, with extra neutrons, so its relative atomic mass is larger than iodine's, even though it has fewer protons. The same thing happens with argon and potassium.

Remember

  1. Early tables: order of atomic weights; incomplete; some elements in the wrong groups.
  2. Mendeleev: left gaps, changed the order where needed, predicted missing elements.
  3. Predicted elements (gallium, scandium, germanium) were discovered and filled the gaps.
  4. Modern table: order of atomic number; isotopes explain the swaps.

Common mistakes

  • Saying early scientists ordered elements by atomic number. Protons had not been discovered, so atomic numbers were not known.
  • Saying Mendeleev used atomic number. He used atomic weight, but changed the order when properties did not fit.
  • Saying the gaps were elements he had forgotten. They were spaces for elements that had not been discovered.
  • Explaining the tellurium and iodine swap with "tellurium has more protons". It has fewer protons, but its isotopes have more neutrons on average.
  • Saying Mendeleev was just lucky. His predictions came from the trends in each group, and several were confirmed.

Exam tip

In the 6-mark "describe the steps" question, keep the events in order and say why each step was an improvement. Use the key words: atomic weight, gaps, changed the order, predictions, discovered, atomic number, isotopes.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.