Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Giant covalent structures

Practise 11 exam-style questions on Giant covalent structures for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 11 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
11 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Silicon dioxide has a melting point of 1710 °C.

Explain why silicon dioxide has a very high melting point.

Model answer

Silicon dioxide has a giant covalent structure in which all of the atoms are linked to other atoms by strong covalent bonds. To melt it, many of these strong bonds must be broken, which needs a lot of energy.

Explanation

In giant covalent structures there are no separate molecules, so melting cannot happen just by overcoming weak forces between molecules: the covalent bonds themselves must be broken.

Mark scheme
  1. 1 mark

    all the atoms are linked by strong covalent bonds in a giant structure

    allow giant covalent structure / lattice; do not accept intermolecular forces

  2. 1 mark

    a lot of energy is needed to break these (many) bonds

Question 2

2 marks

Sand is mainly silicon dioxide, which has a melting point of 1710 °C. The hottest part of a Bunsen burner flame is about 1500 °C.

Explain why sand does not melt when it is heated strongly in a Bunsen burner flame.

Model answer

The flame is about 1500 °C, but silicon dioxide melts at 1710 °C, so the sand never reaches its melting point. Its melting point is so high because silicon dioxide has a giant covalent structure, and many strong covalent bonds must be broken to melt it.

Explanation

Compare the temperature with the melting point first, then explain the high melting point using the giant covalent structure.

Mark scheme
  1. 1 mark

    the melting point of silicon dioxide is higher than the temperature of the flame

  2. 1 mark

    because (many) strong covalent bonds must be broken, which needs a lot of energy

    allow giant covalent structure

Question 3

3 marks

Diagrams of the structures of three substances are described below.

Substance X: every atom is joined by covalent bonds to the atoms around it, in a network that continues in all directions.
Substance Y: separate pairs of atoms joined by one covalent bond.
Substance Z: separate molecules of three atoms, with a large distance between the molecules.

Which substance has a giant covalent structure?
Give two reasons for your answer.

Model answer

Substance X, because all of its atoms are linked to other atoms by covalent bonds, and the network continues in all directions with no separate molecules.

Explanation

To recognise a giant covalent structure, look for a continuous network of covalent bonds with no separate molecules. Y and Z are made of small molecules.

Mark scheme
  1. 1 mark

    X

  2. 1 mark

    all the atoms are joined / linked by covalent bonds

  3. 1 mark

    the structure continues in all directions / there are no separate molecules

    allow it is a giant / continuous network

Question 4

4 marks

Silicon and sulfur are both non-metal elements.
Silicon has a giant covalent structure in which each silicon atom is bonded to four other silicon atoms. It melts at 1414 °C.
Sulfur consists of S₈ molecules. It melts at 115 °C.

Explain the difference in the melting points of silicon and sulfur.

Model answer

Silicon has a giant covalent structure in which every atom is joined to four others by strong covalent bonds. To melt silicon, many of these strong covalent bonds must be broken, which needs a lot of energy, so its melting point is very high. Sulfur is made of small S₈ molecules. When sulfur melts, only the weak intermolecular forces between the molecules are overcome and the covalent bonds inside the molecules stay intact. This needs much less energy, so sulfur melts at a much lower temperature.

Explanation

Both elements contain covalent bonds, so the difference is whether melting breaks those bonds (giant covalent) or only overcomes the forces between molecules (small molecules).

Mark scheme
  1. 1 mark

    silicon has a giant covalent structure / all its atoms are joined by covalent bonds

  2. 1 mark

    to melt silicon, (many) strong covalent bonds must be broken, which needs a lot of energy

  3. 1 mark

    sulfur consists of small molecules with weak intermolecular forces between them

  4. 1 mark

    to melt sulfur only the (weak) intermolecular forces are overcome, which needs much less energy / the covalent bonds are not broken

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Giant covalent structures

The big idea

In a giant covalent structure, every atom is linked to other atoms by strong covalent bonds, in a network that carries on in all directions. There are no separate molecules. To melt or boil the substance, these covalent bonds must be broken, so giant covalent substances are solids with very high melting points. The examples you need are diamond and graphite (two forms of carbon) and silicon dioxide (silica, the main compound in sand).

What makes a structure giant covalent

  • The particles are atoms, not ions. They are non-metals, such as carbon, silicon and oxygen, which share pairs of electrons in covalent bonds.
  • The bonds link every atom to its neighbours, and the network continues through the whole crystal. Even a small crystal contains billions of billions of atoms, all bonded into one network.
  • Because there are no molecules, the formula only shows the ratio of atoms. In silicon dioxide, each silicon atom is bonded to four oxygen atoms, but each oxygen atom is shared between two silicon atoms. So there are two oxygen atoms for every silicon atom: SiO₂.

Carbon dioxide, CO₂, is different: it really is made of small, separate molecules, which is why it is a gas.

Properties and why

PropertyExplanation
Very high melting and boiling pointsAll the atoms are linked by strong covalent bonds. Many of these bonds must be broken to melt or boil the substance, which needs a lot of energy
Solid at room temperatureRoom temperature is far below the melting point
Hard (diamond, silicon dioxide)The strong bonds hold the atoms in a rigid network, so they cannot easily be moved
Do not conduct electricity (except graphite)All the outer electrons are used in covalent bonds, so there are no delocalised electrons, and there are no ions. Even when molten, no charged particles can move

Graphite is the exception: one electron from each carbon atom is delocalised, so graphite conducts (see also: Graphite).

Small molecules contain strong covalent bonds too, but they melt at low temperatures. Melting them only overcomes the weak intermolecular forces between the molecules; their covalent bonds stay intact. A giant covalent structure has no molecules, so it has no intermolecular forces: melting it means breaking covalent bonds. So it is the structure, not just the type of bond, that decides the melting point.

Bar chart of melting point in °C for each substance: Chlorine -101, Water 0, Sulfur (S₈) 115, Silicon 1414, Silicon dioxide 1710.
All five substances contain covalent bonds. The three made of small molecules melt below 120 °C; silicon and silicon dioxide, which are giant covalent, melt above 1400 °C.

Recognising giant covalent structures from diagrams

  • Giant covalent: atoms joined by lines (covalent bonds) in a continuous network. The bonds run off the edges of the diagram, because it shows only a small part of a structure that keeps going.
  • Small molecules: small, separate groups of bonded atoms, with gaps between them and no bonds from one group to the next.
  • Polymers: long chains, or a repeating unit drawn in brackets with n.
  • Not covalent: a diagram showing charged ions (+ and −) is an ionic lattice; positive ions with electrons between them is a metal.

Using data to spot a giant covalent structure

A student says: "Any substance that melts above 1000 °C must have a giant covalent structure." Use the data to evaluate this statement.

SubstanceMelting point in °CConducts when solid?Conducts when molten?
Silicon dioxide1710nono
Magnesium oxide2852noyes
Iron1538yesyes
  • All three melt above 1000 °C, so all three have giant structures with many strong bonds, which need a lot of energy to overcome.
  • Iron conducts as a solid, so it has delocalised electrons: it is a metal.
  • Magnesium oxide conducts only when molten, so it is made of ions that are free to move once it melts: it is ionic.
  • Silicon dioxide never conducts, so it has no ions and no delocalised electrons: it is the only giant covalent substance here.

Conclusion: the student is wrong. A very high melting point shows a giant structure, but you need more evidence, such as electrical conductivity, to tell which kind.

Common mistakes

  • Saying giant covalent substances have strong intermolecular forces. There are no molecules, so there are no intermolecular forces: strong covalent bonds must be broken.
  • Giving carbon dioxide as an example. CO₂ is made of small molecules; silicon dioxide is the giant covalent oxide.
  • Giving "carbon" as an example. Name the form: diamond or graphite.
  • Saying silicon dioxide is made of SiO₂ molecules. The formula is the ratio of atoms in a giant structure.
  • Saying all substances with covalent bonds have low melting points. That is only true for small molecules.

Exam tip

Questions often describe a substance you have not met. Use every clue you are given, such as the elements it contains, its melting point and whether it conducts, to decide its structure. Then explain each property separately, naming the feature of the structure and linking it: "many strong covalent bonds must be broken, so a lot of energy is needed".

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.