Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Chemical bonds

Practise 12 exam-style questions on Chemical bonds for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 12 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
12 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Sodium chloride contains ionic bonding.

What are the particles in ionic bonding, and what holds them together?

Model answer

The particles are oppositely charged ions - positive sodium ions and negative chloride ions. They are held together by strong electrostatic forces of attraction between the oppositely charged ions.

Explanation

In ionic bonding the bond is the electrostatic attraction between positive and negative ions. There are no shared electrons and no molecules: the ions form when electrons are transferred from the metal to the non-metal.

Mark scheme
  1. 1 mark

    oppositely charged ions / positive and negative ions

    do not accept atoms or molecules

  2. 1 mark

    strong electrostatic forces of attraction (between the oppositely charged ions)

    allow electrostatic attraction

Question 2

2 marks

In both metallic bonding and covalent bonding, atoms share electrons.

Explain the difference between the way electrons are shared in metallic bonding and in covalent bonding.

Model answer

In metallic bonding the outer electrons are delocalised: they are shared by all the atoms and can move freely through the whole structure. In covalent bonding a pair of electrons is shared between two particular atoms and stays between them.

Explanation

Metallic bonding is like a 'sea' of electrons shared by every ion in the metal, whereas a covalent bond is a localised shared pair between just two atoms. The delocalised electrons are why metals conduct electricity.

Mark scheme
  1. 1 mark

    in metallic bonding the electrons are delocalised / free to move through the whole structure (shared by all the ions)

  2. 1 mark

    in covalent bonding a pair of electrons is shared between two particular atoms

    allow the shared electrons stay between two atoms

Question 3

3 marks

When sodium reacts with chlorine, electrons are transferred from sodium atoms to chlorine atoms. In a chlorine molecule, Cl₂, electrons are shared between the two chlorine atoms.
The electronic structure of sodium is 2,8,1.
The electronic structure of chlorine is 2,8,7.

Explain why electrons are transferred between sodium and chlorine atoms but shared between two chlorine atoms.

Model answer

Sodium is a metal with one outer electron, which it loses easily, while a chlorine atom needs to gain one electron to complete its outer shell. So the electron is transferred from sodium to chlorine, forming Na⁺ and Cl⁻ ions. When two chlorine atoms bond, both need to gain an electron and neither will lose one, so instead each atom contributes one electron to a shared pair, giving both atoms eight outer electrons.

Explanation

Transfer happens when one atom readily loses electrons (a metal) and the other readily gains them (a non-metal). Two non-metal atoms both want to gain electrons, so sharing is the only way for both to complete their outer shells.

Mark scheme
  1. 1 mark

    sodium (a metal) loses its one outer electron easily

  2. 1 mark

    chlorine needs to gain one electron to complete its outer shell, so the electron is transferred from sodium to chlorine

  3. 1 mark

    two chlorine atoms both need to gain an electron (neither loses electrons), so they share a pair of electrons

    allow each chlorine atom contributes one electron to a shared pair, so both get 8 outer electrons

Question 4

4 marks

Compare ionic bonding and covalent bonding.

Model answer

In ionic bonding electrons are transferred from metal atoms to non-metal atoms, forming oppositely charged ions that are held together by electrostatic attraction. In covalent bonding non-metal atoms share pairs of electrons, and the atoms are held together by the attraction between the shared electrons and the nuclei. Ionic bonding happens between metals and non-metals, whereas covalent bonding happens between non-metals. Both are strong bonds.

Explanation

Compare like with like: how the electrons behave (transferred or shared), which elements are involved, what the particles are and what the attraction is. Both types of bond are electrostatic and both are strong.

Mark scheme
  1. 1 mark

    ionic bonding involves the transfer of electrons; covalent bonding involves sharing pairs of electrons

    max 4; each point must refer to both types of bonding

  2. 1 mark

    ionic bonding occurs between metals and non-metals; covalent bonding occurs between non-metals

  3. 1 mark

    ionic bonding has oppositely charged ions as the particles; covalent bonding has atoms as the particles

  4. 1 mark

    ionic: electrostatic attraction between oppositely charged ions; covalent: electrostatic attraction between the shared pair of electrons and the nuclei

  5. 1 mark

    both are strong bonds

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Chemical bonds

The big idea

Atoms are held together by three types of strong chemical bond: ionic, covalent and metallic. Which type forms depends on the elements involved: metals, non-metals, or one of each. All three are electrostatic attractions between opposite charges. What makes them different is what happens to the outer electrons: they are transferred, shared or delocalised.

The three types of strong bond

FeatureIonicCovalentMetallic
Found inCompounds of a metal with a non-metalMost non-metal elements and compounds of non-metalsMetallic elements and alloys
ExamplesSodium chloride, magnesium oxideChlorine (Cl₂), water (H₂O), diamondCopper, magnesium, brass
ParticlesOppositely charged ionsAtomsMetal atoms (positive ions) sharing delocalised electrons
Outer electronsTransferred from metal atoms to non-metal atomsShared in pairs between two atomsDelocalised: free to move through the whole structure
The attraction is betweenPositive ions and negative ionsThe shared pair of electrons and the nuclei of both atomsThe positive metal ions and the delocalised electrons

Deciding the type of bonding

Look at the elements in the substance and decide whether each one is a metal or a non-metal. Most metals are on the left of the periodic table and in the middle block; the non-metals are grouped towards the top right. Hydrogen is a non-metal, wherever a periodic table places it.

  • Metal + non-metal: ionic (for example potassium bromide).
  • Non-metals only, as an element or a compound: covalent (for example nitrogen, ammonia).
  • Metals only, as an element or an alloy: metallic (for example calcium, brass).

Two things follow from these rules:

  • Ionic bonding is never found in a pure element. It needs one atom to lose electrons (a metal) and another to gain them (a non-metal), so two different elements are needed.
  • Containing a metal does not make a substance ionic. Copper and brass contain only metals, so their bonding is metallic.

The same element can form different bonds with different partners. Chlorine gains an electron from sodium to form ionic sodium chloride, but it shares a pair of electrons with hydrogen in hydrogen chloride, and with another chlorine atom in a Cl₂ molecule.

Evaluating a claim about bonding

A student says: "Strong chemical bonds only form between atoms of different elements." Evaluate the statement, using an example of each type of bond.

  • Ionic bonding: true. Electrons are transferred from a metal atom to a non-metal atom, so two different elements are needed, as in potassium bromide.
  • Covalent bonding: false. Two atoms of the same non-metal can share a pair of electrons, as in a nitrogen molecule, N₂, and the carbon atoms in diamond are all joined by covalent bonds.
  • Metallic bonding: false. A pure metal such as calcium has metallic bonding between atoms of just one element.

Conclusion: the statement is only true for ionic bonding, so it is wrong as a general rule.

Bonds as electrostatic forces

Opposite charges attract. This electrostatic attraction holds the particles together in every strong bond:

  • Ionic: metal atoms lose their outer electrons and become positive ions; non-metal atoms gain those electrons and become negative ions. The oppositely charged ions attract each other strongly.
  • Covalent: two atoms share a pair of electrons. The negative shared pair is attracted to the positive nuclei of both atoms, so it holds the two atoms together.
  • Metallic: the outer electrons of the metal atoms become delocalised, leaving positive metal ions. The ions are attracted to the "sea" of negative delocalised electrons around them.

So the three bonds have three things in common: they are all strong, they are all electrostatic attractions between opposite charges, and they all involve the outer-shell electrons of the atoms.

Clues from properties

Data about a substance can point to its bonding (see also: Properties of ionic compounds):

  • conducts electricity as a solid and when molten: metallic;
  • conducts only when molten or dissolved, not as a solid: ionic;
  • does not conduct and has a low melting point: covalent, small molecules;
  • does not conduct and has a very high melting point: covalent, a giant covalent structure. (Graphite is an exception: it is giant covalent but conducts.)

Remember

  • Ionic: metal + non-metal; electrons transferred; oppositely charged ions attract.
  • Covalent: non-metals only; electrons shared in pairs; the shared pair is attracted to both nuclei.
  • Metallic: metals and alloys; electrons delocalised; positive ions attracted to the delocalised electrons.
  • All three are strong electrostatic attractions involving the outer electrons.

Common mistakes

  • Saying the particles in sodium chloride are atoms or molecules. In ionic bonding they are oppositely charged ions.
  • Saying electrons are "shared" in ionic bonding. They are transferred from the metal to the non-metal.
  • Calling the bonding in an alloy ionic. Alloys are mixtures of metals and have metallic bonding.
  • Describing metallic bonding as an attraction between ions and nuclei, or between neighbouring ions. The attraction is between the positive ions and the delocalised electrons.
  • Thinking non-metal elements have no bonds. Chlorine, oxygen and diamond all contain covalent bonds.

Exam tip

In a "describe" or "compare" question on bonding, give the same four facts for each type: the elements involved, the particles, what the electrons do and what the electrostatic attraction is between. In a comparison, make each point about both types: "in ionic bonding electrons are transferred, whereas in covalent bonding they are shared".

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.