Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Neutralisation of acids and salt production

Practise 14 exam-style questions on Neutralisation of acids and salt production for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Acids react with metal carbonates to produce a salt, water and one other product.

Name the other product.

Model answer

Carbon dioxide

Explanation

acid + metal carbonate → salt + water + carbon dioxide. The carbon dioxide is seen as fizzing, which is how a carbonate reaction differs from the reaction of an acid with a metal oxide or hydroxide.

Mark scheme
  1. 1 mark

    carbon dioxide

    allow CO₂

Question 2

2 marks

Zinc carbonate is added to dilute nitric acid.

Name all the products of the reaction.

Model answer

Zinc nitrate, water and carbon dioxide.

Explanation

acid + metal carbonate → salt + water + carbon dioxide. Nitric acid always produces nitrates, and the zinc ions come from the carbonate.

Mark scheme
  1. 1 mark

    zinc nitrate

  2. 1 mark

    water and carbon dioxide

    both needed

Question 3

3 marks

A student wants to make two salts: copper chloride and potassium sulfate.

Suggest an acid and one other reactant that could be used to make each salt.

Model answer

Copper chloride: hydrochloric acid and copper oxide (or copper hydroxide or copper carbonate).
Potassium sulfate: sulfuric acid and potassium hydroxide (or potassium carbonate).

Explanation

The acid provides the negative ion (hydrochloric → chloride, sulfuric → sulfate) and the base, alkali or carbonate provides the positive ion. Copper metal cannot be used because it is below hydrogen and does not react with dilute acids, and potassium would react dangerously.

Mark scheme
  1. 1 mark

    hydrochloric acid (for copper chloride)

  2. 1 mark

    copper oxide / copper hydroxide / copper carbonate

    do not accept copper (copper does not react with dilute acids)

  3. 1 mark

    sulfuric acid and potassium hydroxide (for potassium sulfate)

    allow potassium carbonate; both reactants needed; do not accept potassium

Question 4

4 marks

A student has two unlabelled white powders. One is zinc oxide and the other is zinc carbonate. Both are insoluble in water.

Explain how the student could use dilute hydrochloric acid to tell which powder is which. Name the products of each reaction.

Model answer

Add a spatula of each powder to separate test tubes of dilute hydrochloric acid. Both powders react and dissolve, but only the zinc carbonate fizzes, because it produces carbon dioxide gas; bubbling the gas through limewater turns it milky. The zinc oxide dissolves without fizzing.
Zinc oxide gives zinc chloride and water.
Zinc carbonate gives zinc chloride, water and carbon dioxide.

Explanation

Both substances neutralise the acid and form the same salt, zinc chloride, because both contain zinc ions. Only carbonates produce carbon dioxide with acids, so fizzing (and a positive limewater test) identifies the carbonate.

Mark scheme
  1. 1 mark

    add (a little of) each powder to the acid: zinc carbonate fizzes / gives bubbles, zinc oxide does not

    both parts needed

  2. 1 mark

    the gas is carbon dioxide, which turns limewater milky

    allow cloudy

  3. 1 mark

    zinc oxide + hydrochloric acid → zinc chloride + water

    allow products named: zinc chloride and water

  4. 1 mark

    zinc carbonate + hydrochloric acid → zinc chloride + water + carbon dioxide

    allow products named: zinc chloride, water and carbon dioxide

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Neutralisation of acids and salt production

The big idea

Acids are neutralised by alkalis, bases and metal carbonates, and every one of these reactions makes a salt and water. The salt you get depends on two things: the acid used and the positive ion in the substance that neutralises it. Using the charges on common ions, you can work out the formula of any salt.

Alkalis, bases and carbonates

  • A base is a substance that neutralises an acid to form a salt and water. Metal oxides and metal hydroxides are bases.
  • An alkali is a base that dissolves in water, such as a soluble metal hydroxide like sodium hydroxide or potassium hydroxide. All alkalis are bases, but not all bases are alkalis: copper(II) oxide neutralises acids but does not dissolve in water.
  • Metal carbonates also neutralise acids, and they give off carbon dioxide as well.
Acid reacts withProductsExample
an alkali (soluble metal hydroxide)salt + waternitric acid + lithium hydroxide → lithium nitrate + water
a base (insoluble metal hydroxide or metal oxide)salt + waternitric acid + copper(II) hydroxide → copper(II) nitrate + water
a metal carbonatesalt + water + carbon dioxidesulfuric acid + zinc carbonate → zinc sulfate + water + carbon dioxide

Carbonates fizz with acids because carbon dioxide is given off; bubbling the gas through limewater turns it milky. Oxides and hydroxides do not fizz. When an alkali neutralises an acid there is usually no visible change, but the temperature rises.

Naming the salt

AcidFormulaSalts it makesNegative ion in the salt
hydrochloric acidHClchloridesCl⁻
nitric acidHNO₃nitratesNO₃⁻
sulfuric acidH₂SO₄sulfatesSO₄²⁻

The first part of the name comes from the positive ion in the base, alkali or carbonate. For example, sodium carbonate and sulfuric acid make sodium sulfate. Ammonia solution is also an alkali; it makes ammonium salts, which contain the NH₄⁺ ion and are used as fertilisers.

Working out the formula of a salt

In a compound, the total positive charge equals the total negative charge. These are the common ions:

ChargeIons
1+Na⁺, K⁺, Li⁺, NH₄⁺
2+Mg²⁺, Ca²⁺, Zn²⁺, Cu²⁺, Fe²⁺ (iron(II))
3+Al³⁺, Fe³⁺ (iron(III))
1−Cl⁻ (chloride), NO₃⁻ (nitrate), OH⁻ (hydroxide)
2−SO₄²⁻ (sulfate), CO₃²⁻ (carbonate), O²⁻ (oxide)
  • One Zn²⁺ ion balances two Cl⁻ ions, so zinc chloride is ZnCl₂.
  • When a formula needs more than one of a group of atoms, put the group in brackets: copper(II) nitrate is Cu(NO₃)₂, and potassium sulfate is K₂SO₄ (no brackets needed, as there is only one sulfate ion).

Making iron(III) sulfate for water treatment

Iron(III) sulfate is used to clean drinking water. It can be made by neutralising sulfuric acid with insoluble iron(III) hydroxide, Fe(OH)₃. Write the formula of the salt and a balanced symbol equation.

Formula: the ions are Fe³⁺ and SO₄²⁻. The lowest common multiple of 3 and 2 is 6, so two Fe³⁺ (6+) balance three SO₄²⁻ (6−): Fe₂(SO₄)₃.

Unbalanced equation: Fe(OH)₃ + H₂SO₄ → Fe₂(SO₄)₃ + H₂O

Balance: two Fe(OH)₃ give the two iron atoms, and three H₂SO₄ give the three sulfate groups. That makes 6 OH groups and 6 hydrogen ions, which form 6 water molecules:

2Fe(OH)₃ + 3H₂SO₄ → Fe₂(SO₄)₃ + 6H₂O

Check the oxygen: \(2 \times 3 + 3 \times 4 = 18\) on the left and \(3 \times 4 + 6 = 18\) on the right.

Common mistakes

  • Calling a metal a base. Zinc metal reacts with acids, but it is not a base; zinc oxide and zinc hydroxide are.
  • Saying every base is an alkali. Only bases that dissolve in water are alkalis.
  • Getting the salt's name wrong: nitric acid gives a nitrate (not a nitrite or nitride), sulfuric acid a sulfate (not a sulfide or sulfite) and hydrochloric acid a chloride (not a chlorate).
  • Missing out brackets, as in CuNO₃₂ for copper(II) nitrate. The correct formula is Cu(NO₃)₂.
  • Forgetting a product. An acid and a carbonate always give three products: a salt, water and carbon dioxide.

Exam tip

When asked to "name the products", give every product, not just the salt. When writing a formula, write down the ions and their charges first, balance the charges, and only then write the equation.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.