Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Metals as conductors

Practise 9 exam-style questions on Metals as conductors for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 9 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
9 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Copper is used for electrical wiring.

Explain why copper is a good conductor of electricity.

Model answer

Copper has delocalised electrons, which are free to move through the whole metal structure. When a potential difference is applied, these electrons move through the wire and carry electrical charge.

Explanation

Metals conduct electricity because their delocalised electrons can move through the structure carrying charge. The more freely the electrons move, the better the conductor.

Mark scheme
  1. 1 mark

    copper has delocalised electrons

    allow free electrons / sea of electrons

  2. 1 mark

    which are free to move through the (whole) structure and carry (electrical) charge

Question 2

2 marks

A student says: "When a metal wire conducts electricity, the metal ions move along the wire and carry the charge."

Explain why the student is wrong.

Model answer

The metal ions are held in fixed positions in the giant structure; they can vibrate but they do not move along the wire. The charge is carried by the delocalised electrons, which are free to move through the whole metal.

Explanation

Ions carry charge in molten or dissolved ionic compounds, but not in metals. In a metal, only the delocalised electrons are free to move through the structure.

Mark scheme
  1. 1 mark

    the metal ions are held in fixed positions / do not move along the wire

    allow ions only vibrate

  2. 1 mark

    the charge is carried by the delocalised electrons, which move through the metal

Question 3

3 marks

A saucepan has a metal body and a handle made of a polymer.

Explain, in terms of structure and bonding, why the metal body conducts thermal energy well but the polymer handle does not.

Model answer

The metal has a giant structure with delocalised electrons that are free to move, so they transfer energy quickly through the metal from the hob to the food. The polymer is made of large molecules in which all the electrons are held in covalent bonds, so there are no delocalised electrons to transfer energy and the handle stays cool enough to hold.

Explanation

Metals conduct thermal energy well because of their delocalised electrons. In polymers the electrons are fixed in covalent bonds, which makes polymers poor conductors and good handle materials.

Mark scheme
  1. 1 mark

    the metal has delocalised electrons

  2. 1 mark

    which transfer energy (quickly) through the metal

  3. 1 mark

    the polymer has no delocalised electrons / its electrons are held in covalent bonds

    allow the polymer is made of molecules with no free electrons

Question 4

4 marks

An electric cable has copper wires inside a polymer coating.

Explain, in terms of structure and bonding, why the copper conducts electricity but the polymer coating does not.

Model answer

Copper has a giant metallic structure with delocalised electrons that are free to move through the whole metal. When a potential difference is applied, these electrons move through the wire carrying charge. The polymer coating is made of large molecules held together by covalent bonds. All of its electrons are held in these bonds, and the molecules have no overall charge, so there are no charged particles that can move and the coating does not conduct. This makes the cable safe to touch.

Explanation

To conduct electricity a material needs charged particles that can move. Metals have delocalised electrons; polymers have neither delocalised electrons nor ions.

Mark scheme
  1. 1 mark

    copper has a giant metallic structure with delocalised electrons

  2. 1 mark

    the delocalised electrons can move through the metal and carry charge

  3. 1 mark

    the polymer consists of (large) molecules in which the electrons are held in covalent bonds / there are no delocalised electrons

  4. 1 mark

    the polymer molecules have no overall charge / there are no ions, so there are no charged particles that can move to carry charge

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Metals as conductors

The big idea

Metals are good conductors of electricity and of thermal energy. Both properties have the same cause: the delocalised electrons in the metal, which are free to move through the whole structure.

Metallic structure: a regular grid of positive metal ions (circles marked "+") with small dots (electrons) scattered between them. Label positive metal ion points to one of the circles. Label delocalised electron points to one of the small dots. (positive metal ion = positive metal ion; delocalised electron = delocalised electron.)
The positive metal ions stay in place; the delocalised electrons can move anywhere in the metal.

Conducting electricity

A metal is a giant structure of positive metal ions surrounded by delocalised electrons (see also: Properties of metals and alloys). When a potential difference is applied, for example by connecting a cell, the delocalised electrons move through the metal towards the positive terminal. They carry electrical charge through the metal, and this flow of charge is the current. The positive ions stay in their positions in the lattice and only vibrate.

Metals conduct when solid and when liquid: liquid mercury still has delocalised electrons that can move. Compare two kinds of substance that do not conduct:

  • solid ionic compounds: the ions are held in fixed positions, and there are no delocalised electrons;
  • polymers such as poly(ethene): all the electrons are held in covalent bonds, so there are no delocalised electrons or ions.

So electrical wires are made of a metal such as copper, with a plastic coating as an insulator.

Conducting thermal energy

When one part of a metal is heated, the delocalised electrons there gain kinetic energy. Because they are free to move, they travel quickly through the metal and transfer energy to cooler parts, as they collide with other electrons and ions. Non-metallic materials such as plastics and glass have no delocalised electrons, so energy is passed on only slowly, from one vibrating particle to the next. This is why pans have metal bases but plastic or wooden handles.

Remember

  • Delocalised electrons explain both kinds of conduction.
  • Electricity: the delocalised electrons move through the metal and carry charge.
  • Thermal energy: the delocalised electrons move through the metal and transfer energy.
  • The metal ions do not move through the metal.

Common mistakes

  • Saying the metal ions move and carry the charge. Only the delocalised electrons move through the metal.
  • Saying the electrons "carry charge" when explaining thermal conduction. For thermal energy, they transfer energy.
  • Explaining conduction by the atoms being close together, or by a high melting point. The reason is the delocalised electrons.
  • Writing just "metals have electrons". Every substance has electrons: say they are delocalised and free to move.

Exam tip

Most "explain why metals conduct" questions are worth 2 marks: one for delocalised electrons, and one for what they do (move and carry charge for electricity, transfer energy for thermal conduction). If the question compares a metal with a plastic, explain both sides: the metal has delocalised electrons and the plastic has none.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.