Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Conservation of mass and balanced chemical equations

Practise 11 exam-style questions on Conservation of mass and balanced chemical equations for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 11 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
11 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Aluminium reacts with oxygen to form aluminium oxide.

…Al + …O₂ → …Al₂O₃

Balance the equation.

Model answer

4Al + 3O₂ → 2Al₂O₃

Explanation

Balance the oxygen first: the lowest common multiple of 2 (in O₂) and 3 (in Al₂O₃) is 6, so use 3O₂ and 2Al₂O₃. There are then 4 aluminium atoms on the right, so use 4Al. Never change the subscripts in a formula to balance an equation.

Mark scheme
  1. 1 mark

    4Al + 3O₂ → 2Al₂O₃

    allow multiples

Question 2

2 marks

Iron is extracted from iron oxide by reacting it with carbon monoxide.

Fe₂O₃ + …CO → …Fe + …CO₂

Balance the equation.

Model answer

Fe₂O₃ + 3CO → 2Fe + 3CO₂

Explanation

There are 2 iron atoms in Fe₂O₃, so 2Fe is needed. Each CO molecule gains one oxygen atom to become CO₂, and Fe₂O₃ has 3 oxygen atoms to give, so 3CO and 3CO₂ are needed. Check: 2 Fe, 3 C and 6 O on each side.

Mark scheme
  1. 1 mark

    2Fe

    allow multiples of the whole equation

  2. 1 mark

    3CO and 3CO₂

Question 3

3 marks

Explain the difference between 2H₂O and H₂O₂.

Model answer

2H₂O means two molecules of water. The large 2 multiplies the whole formula, and each water molecule contains two hydrogen atoms and one oxygen atom, so there are 4 hydrogen atoms and 2 oxygen atoms in total. H₂O₂ is a single molecule of a different substance (hydrogen peroxide), and the subscript 2 after O shows that each molecule contains two oxygen atoms as well as two hydrogen atoms.

Explanation

A number in normal script in front of a formula tells you how many molecules or formula units there are. A subscript within a formula tells you how many atoms of that element are in one molecule; changing it changes the substance.

Mark scheme
  1. 1 mark

    2H₂O means two molecules of water

    allow two formula units of water

  2. 1 mark

    each water molecule contains two hydrogen atoms and one oxygen atom (4 H and 2 O in total)

  3. 1 mark

    H₂O₂ is one molecule containing two hydrogen atoms and two oxygen atoms / is a different substance

    allow hydrogen peroxide

Question 4

4 marks

Hydrogen reacts with oxygen to form water:

2H₂ + O₂ → 2H₂O

A student says: "There are three molecules on the left of the equation but only two molecules on the right, so the total mass must decrease."

Explain why the student is wrong.

Model answer

Count the atoms: on the left there are 2 × 2 = 4 hydrogen atoms and 2 oxygen atoms, and on the right there are also 4 hydrogen atoms and 2 oxygen atoms. In the reaction, bonds in the H₂ and O₂ molecules break and the atoms join up in a new way, so the number of molecules can change, but no atoms are lost or made. The mass depends on the atoms present, not on how many molecules they form, so the total mass of the water equals the total mass of the hydrogen and oxygen.

Explanation

The law of conservation of mass is about atoms, not molecules. A balanced equation always has the same number of each type of atom on both sides, even when the number of molecules changes.

Mark scheme
  1. 1 mark

    there are 4 hydrogen atoms and 2 oxygen atoms on each side

    max 4

  2. 1 mark

    atoms are not lost or made, they are only rearranged

  3. 1 mark

    bonds are broken and new bonds are made, so the number of molecules can change

  4. 1 mark

    the mass depends on the atoms present, so the mass of the products equals the mass of the reactants

    allow mass is conserved

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Conservation of mass and balanced chemical equations

The big idea

In a chemical reaction the atoms are rearranged into new substances, but no atoms are lost or made. This is the law of conservation of mass: the total mass of the products equals the total mass of the reactants. A balanced symbol equation shows the same idea on paper, with the same number of atoms of each element on both sides.

The law of conservation of mass

Every atom you start with is still there at the end, just joined up differently, and each atom keeps its mass. So the total mass cannot change.

  • In a closed system (a sealed container, so nothing can get in or out), the balance reading stays the same during a reaction, even when a precipitate or a gas forms.
  • In an open container, the mass can seem to change if a gas escapes, or if a gas from the air joins in (see also: Mass changes when a reactant or product is a gas).

When you state the law, link it to atoms: no atoms are lost or made during a chemical reaction, so the mass of the products equals the mass of the reactants.

Finding a missing mass

In the thermite reaction, aluminium powder reacts with iron(III) oxide to form aluminium oxide and iron:

2Al + Fe₂O₃ → Al₂O₃ + 2Fe

5.4 g of aluminium reacts completely with 16.0 g of iron(III) oxide, and 11.2 g of iron forms. Calculate the mass of aluminium oxide formed.

Total mass of the reactants: \(5.4 + 16.0 = 21.4\) g

The products have the same total mass, so the mass of aluminium oxide is \(21.4 - 11.2 = 10.2\) g

Reading a formula: subscripts and multipliers

There are two kinds of number in a symbol equation:

  • A subscript (a small, low number) is part of a formula. It tells you how many atoms of the element just before it are in one particle: H₂O has 2 hydrogen atoms and 1 oxygen atom. A subscript after a bracket multiplies everything inside the bracket.
  • A multiplier (a number in normal script in front of a formula) tells you how many particles there are. It multiplies every atom in the formula.
WrittenWhat it showsAtoms of each element
H₂O1 molecule of water2 H, 1 O
3H₂O3 molecules of water6 H, 3 O
Ca(NO₃)₂1 formula unit of calcium nitrate1 Ca, 2 N, 6 O
3Ca(NO₃)₂3 formula units of calcium nitrate3 Ca, 6 N, 18 O

To balance an equation you may only change the multipliers. Changing a subscript changes the substance: H₂O is water, but H₂O₂ is hydrogen peroxide.

How to balance an equation

  1. Write the correct formula of every reactant and product. Hydrogen, oxygen, nitrogen and the halogens exist as diatomic molecules: H₂, O₂, N₂, Cl₂.
  2. Count the atoms of each element on each side.
  3. Put multipliers in front of formulae until the numbers match. Start with an element that is in only one substance on each side, and leave elements on their own (such as O₂ or H₂) until last.
  4. Count every element again to check.

Burning hydrogen sulfide

Hydrogen sulfide (H₂S) burns in oxygen to form sulfur dioxide and water. Balance the equation:

H₂S + O₂ → SO₂ + H₂O

Sulfur and hydrogen first: there is 1 S and there are 2 H on each side, so they already balance.

Oxygen last, because O₂ is an element on its own. The right has 2 + 1 = 3 O atoms, but oxygen molecules come in pairs, so the number of O atoms must be even.

Double the other three: 2H₂S gives 2SO₂ and 2H₂O, which contain 4 + 2 = 6 O atoms, so write 3O₂.

2H₂S + 3O₂ → 2SO₂ + 2H₂O

Check: S 2 = 2, H 4 = 4, O 6 = 6.

Equations often need state symbols: (s) solid, (l) liquid, (g) gas and (aq) aqueous, meaning dissolved in water. For the example above, once the products have cooled to room temperature: 2H₂S(g) + 3O₂(g) → 2SO₂(g) + 2H₂O(l).

A balanced equation is the law of conservation of mass written in symbols. To use an equation to explain why mass is conserved, count the atoms of each element on each side and show that the numbers are equal.

Remember

  • No atoms are lost or made in a reaction, so the mass of the products equals the mass of the reactants.
  • Subscripts are part of a formula; multipliers count particles. Only multipliers change when you balance.
  • Balanced means the same number of atoms of each element on both sides.

Common mistakes

  • Changing a subscript to balance an equation, such as writing H₂O₂ for water. Change only the numbers in front of formulae.
  • Writing 2N or 2O instead of N₂ or O₂. These elements exist as diatomic molecules.
  • Forgetting that a multiplier applies to the whole formula: 2H₂O contains 4 hydrogen atoms, not 2.
  • Missing atoms that appear in two products, such as the oxygen in both CO₂ and H₂O.
  • Writing "mass cannot be created or destroyed" without linking it to atoms in a reaction. Say that no atoms are lost or made.

Exam tip

"Write a balanced symbol equation" questions usually give one mark for the correct formulae and one for balancing, so get the formulae right before you add any numbers. Always finish with an atom count for every element. Multiples of the right numbers are usually accepted, but give the simplest whole numbers.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.