Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Graphene and fullerenes

Practise 14 exam-style questions on Graphene and fullerenes for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Fullerene structures are based on rings of carbon atoms. Most of the rings contain six carbon atoms.

Give the numbers of carbon atoms in the other rings that fullerenes may contain.

Model answer

Five or seven carbon atoms.

Explanation

The structure of fullerenes is based on hexagonal rings of carbon atoms, but they may also contain rings with five or seven carbon atoms. Rings of five allow the structure to curve into a closed hollow shape.

Mark scheme
  1. 1 mark

    five and seven

    allow either 5 or 7 for the mark

Question 2

2 marks

Carbon nanotubes are added to the plastic used to make some tennis racket frames.

Suggest why carbon nanotubes are added.

Model answer

Carbon nanotubes are very strong and very light, so adding them reinforces the plastic, making the racket frame stronger without making it much heavier.

Explanation

Nanotubes have very high length to diameter ratios and strong covalent bonds, which makes them useful for reinforcing materials such as composites in sports equipment.

Mark scheme
  1. 1 mark

    carbon nanotubes are very strong

    allow have high tensile strength

  2. 1 mark

    so they make the frame stronger without adding much mass / while keeping it light

    allow they reinforce the plastic

Question 3

3 marks

Buckminsterfullerene was the first fullerene to be discovered.

Describe the structure of Buckminsterfullerene.

Model answer

Buckminsterfullerene is a molecule with the formula C₆₀. Its 60 carbon atoms are joined by covalent bonds in rings of six (and five) carbon atoms, which form a hollow sphere, like a football.

Explanation

C₆₀ is a single molecule, not a giant structure. The rings of five carbon atoms allow the sheet of hexagons to curve round into a closed hollow ball.

Mark scheme
  1. 1 mark

    a molecule of 60 carbon atoms / C₆₀

  2. 1 mark

    hollow sphere / ball shape

    allow spherical cage

  3. 1 mark

    made of hexagonal rings (and rings of five carbon atoms)

    allow rings of six and five carbon atoms

Question 4

4 marks

Graphene is being developed for flexible, transparent touchscreens on mobile phones.

Explain why graphene is suitable for this use, in terms of its structure and bonding.

Model answer

Graphene has one delocalised electron from each carbon atom. These electrons can move across the layer and carry charge, so graphene conducts electricity, which a touchscreen needs. Its carbon atoms are held by strong covalent bonds in a giant network, so it is very strong and does not crack when the screen is bent. Because it is only one atom thick, it is extremely thin and lets light through, so the display can be seen through it.

Explanation

Link each requirement of the use to a feature of graphene: conductivity to delocalised electrons, strength to strong covalent bonds, and transparency to it being a single layer of atoms.

Mark scheme
  1. 1 mark

    graphene has delocalised electrons

  2. 1 mark

    so it conducts electricity / the delocalised electrons can move and carry charge

  3. 1 mark

    it has strong covalent bonds (in a giant network), so it is strong and does not break when the screen is bent

  4. 1 mark

    it is a single layer of atoms / one atom thick, so light can pass through it

    allow very thin so it is transparent / light

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Graphene and fullerenes

The big idea

Graphene and fullerenes are forms of carbon built from rings of carbon atoms. Graphene is a single layer of graphite, one atom thick. Fullerenes are molecules of carbon atoms with hollow shapes, such as balls and tubes. Their unusual structures give them properties that are useful in electronics, new materials, medicine and nanotechnology.

Graphene

Graphene is a single layer of graphite: a flat sheet of hexagonal rings of carbon atoms, only one atom thick. Each carbon atom is covalently bonded to three others, and one electron from each atom is delocalised. Every atom in the sheet is linked to the rest, so graphene is a giant covalent structure that spreads out in two dimensions.

PropertyExplanation
Very strongEvery atom is held in the sheet by strong covalent bonds, so many bonds must be broken to tear it
Conducts electricityThe delocalised electrons can move through the layer and carry charge
Very high melting pointMany strong covalent bonds must be broken to melt it
Very thin and light, and flexibleIt is only one atom thick

Graphite is soft, so why is graphene so strong? Graphite's softness comes from the weak forces between its layers, which let them slide. A single layer has nothing to slide over, and its strength comes straight from its covalent bonds.

These properties make graphene useful in:

  • electronics, for example flexible touchscreens and very small, fast circuits;
  • composites, where a little graphene is added to another material, such as a plastic, to make it much stronger without making it heavier.

Fullerenes

Fullerenes are molecules of carbon atoms with hollow shapes. Their structure is based on hexagonal rings of carbon atoms, but they may also contain rings with five or seven carbon atoms. A flat sheet of hexagons can be rolled into a tube, but it cannot close up into a ball: rings of five carbon atoms let the sheet curve round into a closed cage.

  • Buckminsterfullerene, C₆₀, was the first fullerene to be discovered. Its molecules are spherical: 60 carbon atoms in a hollow ball of hexagons and pentagons, shaped like a football.
  • C₆₀ is made of separate molecules, so only weak intermolecular forces are overcome when it changes state; its covalent bonds do not break. It is a soft solid that changes state at a much lower temperature than graphite.
  • Uses of fullerenes include delivering drugs into the body (drug molecules can be carried inside the hollow cage), lubricants (the round molecules roll over each other) and catalysts (they have a very large surface area).

Carbon nanotubes

Carbon nanotubes are cylindrical fullerenes: hexagonal rings of carbon atoms rolled into a tube only a few nanometres wide. They have very high length to diameter ratios, so a nanotube can be thousands or even millions of times longer than it is wide.

  • They are very strong and light, because the atoms are joined by strong covalent bonds, so they are used to reinforce materials such as composites for tennis rackets.
  • They conduct electricity, because they have delocalised electrons, so they are being developed as tiny wires in electronics.
  • Their tiny size makes them useful in nanotechnology.

Using a length to diameter ratio

A carbon nanotube is 2.0 nm wide and has a length to diameter ratio of 1.5 × 10⁶. Calculate its length in millimetres. (1 mm = 1 × 10⁶ nm)

\(\text{length to diameter ratio} = \dfrac{\text{length}}{\text{diameter}}\), so \(\text{length} = \text{ratio} \times \text{diameter}\)

\(\text{length} = 1.5 \times 10^{6} \times 2.0 = 3.0 \times 10^{6}\) nm

\(3.0 \times 10^{6} \div (1 \times 10^{6}) = 3.0\) mm

A tube only 2 nm wide is 3 mm long: that is what a very high length to diameter ratio means.

Recognising the forms of carbon

FormWhat the diagram or description showsGiant structure or molecules?
DiamondEach atom bonded to four others in three dimensionsGiant covalent
GraphiteStacked layers of hexagons, with weak forces between the layersGiant covalent
GrapheneOne flat layer of hexagons, one atom thickGiant covalent (one layer)
Buckminsterfullerene, C₆₀A hollow ball of 60 atoms, made of hexagons and pentagonsMolecules
Carbon nanotubeA hollow tube of hexagons, very long compared with its widthMolecules (cylindrical fullerenes)

Common mistakes

  • Calling fullerenes giant covalent structures. They are molecules, each with a definite number of atoms, such as C₆₀.
  • Saying fullerenes contain only hexagons. They may also contain rings of five or seven carbon atoms.
  • Thinking graphene must be soft like graphite. With only one layer there is nothing to slide, and tearing it means breaking strong covalent bonds.
  • Saying covalent bonds break when C₆₀ melts. Only the weak intermolecular forces between the molecules are overcome.
  • Dividing a length in mm by a diameter in nm. Convert both to the same unit first.

Exam tip

For "give uses" questions, link each use to a property: a hollow cage for carrying drugs, strength and lightness for reinforcing materials, conductivity and tiny size for electronics. To describe fullerenes, include four points: molecules of carbon, hollow shapes, based on hexagonal rings, which may include rings of five or seven atoms.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.