Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

Electrolysis of aqueous solutions

Practise 15 exam-style questions on Electrolysis of aqueous solutions for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Copper sulfate solution is electrolysed using inert electrodes.

Name the product formed at the positive electrode.

Model answer

Oxygen

Explanation

At the anode, oxygen is produced unless the solution contains halide ions. Sulfate is not a halide, so hydroxide ions from the water are discharged to form oxygen.

Mark scheme
  1. 1 mark

    oxygen

    allow O₂; do not accept sulfur / sulfate / sulfur dioxide

Question 2

2 marks

During the electrolysis of an aqueous solution, a gas collected at one electrode relights a glowing splint.

Name the gas. Identify the electrode at which it was produced.

Model answer

The gas is oxygen. It was produced at the positive electrode (anode).

Explanation

A glowing splint relights in oxygen. Oxygen is formed when hydroxide ions lose electrons, which happens at the positive electrode.

Mark scheme
  1. 1 mark

    oxygen

    allow O₂

  2. 1 mark

    positive electrode / anode

Question 3

3 marks

A student electrolyses blue copper chloride solution using graphite electrodes for 15 minutes.

Describe what she would observe.

Model answer

A pink-brown coating of copper forms on the negative electrode. Bubbles of pale green chlorine gas, with a sharp smell, form at the positive electrode. The blue colour of the solution slowly becomes paler.

Explanation

Copper is less reactive than hydrogen, so copper forms at the cathode; chloride is a halide, so chlorine forms at the anode. The blue colour is due to copper ions, so it fades as they are removed from the solution.

Mark scheme
  1. 1 mark

    a pink-brown / brown solid (copper) forms on the negative electrode

    allow orange-brown coating

  2. 1 mark

    bubbles (of gas) at the positive electrode

    allow a pale green gas / gas with a sharp smell (chlorine)

  3. 1 mark

    the blue colour of the solution fades / becomes paler

Question 4

4 marks

A student predicts that when potassium iodide solution is electrolysed, potassium will be produced at the negative electrode and oxygen at the positive electrode.

Explain why both parts of the prediction are wrong. Give the correct products.

Model answer

Potassium is more reactive than hydrogen, so hydrogen ions from the water are discharged at the negative electrode and hydrogen is produced, not potassium. The solution contains iodide ions, which are halide ions, so iodine is produced at the positive electrode, not oxygen.

Explanation

The student has used the rules the wrong way round. A reactive metal is never produced from an aqueous solution, and oxygen is produced at the anode only when there are no halide ions present.

Mark scheme
  1. 1 mark

    hydrogen is produced at the negative electrode (not potassium)

  2. 1 mark

    because potassium is more reactive than hydrogen

  3. 1 mark

    iodine is produced at the positive electrode (not oxygen)

    do not accept iodide

  4. 1 mark

    because the solution contains halide / iodide ions

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Electrolysis of aqueous solutions

The big idea

An aqueous solution contains water as well as the dissolved ionic compound, and the water supplies extra ions. At each electrode, ions from the compound and ions from the water compete, and which ones are discharged depends on the relative reactivity of the elements involved. Two simple rules let you predict the products for a solution of any single ionic compound.

Ions from water

A small proportion of water molecules break down into hydrogen ions and hydroxide ions:

H₂O(l) ⇌ H⁺(aq) + OH⁻(aq)

So sodium chloride solution contains Na⁺ and Cl⁻ ions from the salt, plus H⁺ and OH⁻ ions from the water. The positive ions (Na⁺ and H⁺) move to the cathode, and the negative ions (Cl⁻ and OH⁻) move to the anode. Only one kind of ion is discharged at each electrode.

The two rules (inert electrodes)

  • At the cathode (−): hydrogen is produced if the metal is more reactive than hydrogen. If the metal is less reactive than hydrogen (such as copper or silver), the metal is produced.
  • At the anode (+): oxygen is produced, unless the solution contains halide ions (chloride, bromide or iodide), when the halogen is produced.

Part of the reactivity series, most reactive first: potassium, sodium, calcium, magnesium, aluminium, zinc, iron, hydrogen, copper, silver, gold.

SolutionIons presentCathodeAnode
Sodium chlorideNa⁺, Cl⁻, H⁺, OH⁻hydrogenchlorine
Copper(II) sulfateCu²⁺, SO₄²⁻, H⁺, OH⁻copperoxygen
Copper(II) bromideCu²⁺, Br⁻, H⁺, OH⁻copperbromine
Sodium nitrateNa⁺, NO₃⁻, H⁺, OH⁻hydrogenoxygen

The ions that are not discharged stay in solution. Sodium chloride solution slowly turns into sodium hydroxide solution, which is alkaline. In copper(II) sulfate solution the blue colour fades as the Cu²⁺ ions are removed.

Diagram of an electrolysis cell. Labelled parts: Power supply, Cathode (−), Anode (+), Electrolyte, Beaker, Test tube of gas, Test tube of gas.
Test tubes full of the solution are turned upside down over the electrodes to collect any gas made.

Identifying the products

  • Hydrogen: a lighted splint burns with a squeaky pop.
  • Oxygen: a glowing splint relights.
  • Chlorine: damp litmus paper is bleached white.
  • Bromine or iodine: the solution around the anode turns orange (bromine) or brown (iodine).
  • Copper: a pink-brown coating forms on the cathode.

Required practical: Electrolysis of aqueous solutions

  • This is an investigation, so start with a hypothesis to test, such as "a halogen forms at the anode only if the solution contains halide ions", and choose solutions that test it (for example a chloride, a bromide and a sulfate).
  • Pour the solution (for example copper(II) chloride or sodium chloride) into a beaker and add two inert graphite electrodes that do not touch.
  • Fill two small test tubes with the solution and turn them upside down over the electrodes to collect any gas.
  • Connect the electrodes to a low-voltage d.c. power supply and switch on.
  • Watch each electrode for bubbles, a solid coating or a colour change, and test any gas collected.
  • Rinse the electrodes with distilled water and repeat with other solutions, keeping the voltage, volume and concentration the same.
  • Typical results: copper(II) chloride gives copper and chlorine; sodium chloride gives hydrogen and chlorine.
  • Errors: less chlorine is collected than expected, because chlorine is soluble in water.
  • Safety: wear eye protection. Chlorine is toxic, so work in a well-ventilated room and switch off once enough gas has been collected.

Acids and alkalis are solutions too

Predict the products when (a) dilute hydrochloric acid and (b) sodium hydroxide solution are electrolysed with inert electrodes.

(a) Hydrochloric acid contains H⁺ and Cl⁻ ions. The only positive ions are H⁺, so hydrogen forms at the cathode. Chloride is a halide ion, so chlorine forms at the anode.

(b) Sodium hydroxide solution contains Na⁺, OH⁻ and H⁺ ions. Sodium is more reactive than hydrogen, so hydrogen forms at the cathode. There are no halide ions, so hydroxide ions are discharged and oxygen forms at the anode. Overall, only the water is split up; the sodium hydroxide stays in solution.

Higher tier only

Half equations.

ProductElectrodeHalf equation
Hydrogencathode2H⁺ + 2e⁻ → H₂
CoppercathodeCu²⁺ + 2e⁻ → Cu
Chlorineanode2Cl⁻ → Cl₂ + 2e⁻
Oxygenanode4OH⁻ → O₂ + 2H₂O + 4e⁻ (or 4OH⁻ − 4e⁻ → O₂ + 2H₂O)

The same number of electrons passes through both electrodes. When hydrogen and oxygen are both made, the 4 electrons that produce one O₂ molecule also produce two H₂ molecules, so the volume of hydrogen is twice the volume of oxygen.

Common mistakes

  • Saying sodium forms at the cathode from sodium chloride solution. Sodium is more reactive than hydrogen, so hydrogen forms.
  • Saying sulfur, sulfur dioxide or nitrogen forms at the anode from a sulfate or nitrate. Those ions stay in solution and oxygen forms.
  • Writing "chloride" as the product. The gas is chlorine.
  • Mixing up the splint tests. Hydrogen: a lighted splint pops. Oxygen: a glowing splint relights.
  • Testing for chlorine with dry litmus paper. It must be damp.

Exam tip

Apply the rules one electrode at a time: at the cathode compare the metal with hydrogen; at the anode check for halide ions. In "predict and explain" questions, name each product and give the rule you used as the reason.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.