Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

State symbols

Practise 9 exam-style questions on State symbols for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 9 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
9 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Magnesium ribbon reacts with dilute hydrochloric acid to produce magnesium chloride solution and hydrogen gas.

Mg(s) + 2HCl(…) → MgCl₂(…) + H₂(…)

Give the state symbols for HCl, MgCl₂ and H₂ in this equation.

Model answer

Mg(s) + 2HCl(aq) → MgCl₂(aq) + H₂(g)

Explanation

Dilute acids are solutions in water, so they are (aq). The magnesium chloride formed dissolves in the water of the acid, so it is also (aq). Hydrogen is a gas and bubbles off.

Mark scheme
  1. 1 mark

    HCl (aq) and MgCl₂ (aq)

    all three correct scores 2 marks; any two correct scores 1 mark

  2. 1 mark

    H₂ (g)

Question 2

2 marks

Zinc powder reacts with copper sulfate solution. Zinc sulfate solution and copper are produced.

Write the ionic equation, including state symbols, for this reaction.

Model answer

Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s)

Explanation

The sulfate ions are spectator ions - they are in solution before and after the reaction - so they are left out of the ionic equation. Zinc atoms in the solid lose electrons to form zinc ions in solution, and copper ions in solution gain electrons to form solid copper.

Mark scheme
  1. 1 mark

    Zn + Cu²⁺ → Zn²⁺ + Cu

    ignore sulfate ions if shown on both sides

  2. 1 mark

    Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s)

    state symbols mark; allow if the species are correct

Question 3

3 marks

Copper carbonate, CuCO₃, is a green solid. It reacts with dilute sulfuric acid, H₂SO₄, to produce copper sulfate solution, water and carbon dioxide gas. The formula of copper sulfate is CuSO₄.

Write a balanced symbol equation, including state symbols, for this reaction.

Model answer

CuCO₃(s) + H₂SO₄(aq) → CuSO₄(aq) + H₂O(l) + CO₂(g)

Explanation

The copper carbonate is a solid and the acid is a solution. The copper sulfate formed dissolves in the water, so it is (aq), while the water produced is a liquid and carbon dioxide escapes as a gas, which is why the mixture fizzes.

Mark scheme
  1. 1 mark

    CuCO₃ + H₂SO₄ → CuSO₄ + H₂O + CO₂

    the equation is balanced with all balancing numbers equal to 1

  2. 1 mark

    CuCO₃(s) and H₂SO₄(aq)

    both needed

  3. 1 mark

    CuSO₄(aq), H₂O(l) and CO₂(g)

    all three needed

Question 4

3 marks

A student wrote this equation for the reaction between magnesium ribbon and dilute sulfuric acid:

Mg(aq) + H₂SO₄(l) → MgSO₄(s) + H₂(g)

Three of the state symbols are wrong.

Identify each wrong state symbol, give the correct state symbol and give a reason.

Model answer

Mg should be Mg(s), because magnesium ribbon is a solid metal.
H₂SO₄ should be H₂SO₄(aq), because dilute sulfuric acid is a solution in water.
MgSO₄ should be MgSO₄(aq), because the magnesium sulfate produced dissolves in the water.
The correct equation is Mg(s) + H₂SO₄(aq) → MgSO₄(aq) + H₂(g).

Explanation

Think about what you would actually see: a solid ribbon going into a solution, fizzing as a gas forms, and the ribbon disappearing as a soluble salt forms in solution. (l) is only for pure liquids, not solutions.

Mark scheme
  1. 1 mark

    Mg should be (s) because magnesium is a solid metal / is not dissolved

    each mark needs the correction and the reason

  2. 1 mark

    H₂SO₄ should be (aq) because the dilute acid is a solution in water

    do not accept because it is an acid

  3. 1 mark

    MgSO₄ should be (aq) because the magnesium sulfate dissolves in the water (of the acid) / forms a solution

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

State symbols

The big idea

State symbols show the state of each substance in a chemical equation. They link the equation to what you would see: bubbles of gas, a solid forming, or a solid dissolving. You need to add the correct state symbols to equations for the reactions in the course.

The four state symbols

SymbolMeaningExamples
(s)solidZn(s), CuO(s), a precipitate
(l)liquid, including a molten (melted) substanceH₂O(l), molten NaCl(l)
(g)gasH₂(g), O₂(g), CO₂(g)
(aq)aqueous: dissolved in waterHCl(aq), NaOH(aq), CuSO₄(aq)

Choosing the right symbol

  • Metals, and powders or lumps such as metal oxides and carbonates, are (s).
  • Acids, alkalis and solutions of soluble salts are (aq).
  • Water itself is (l), never (aq). It is (g) only as steam.
  • Gases given off, such as hydrogen and carbon dioxide, are (g).
  • An insoluble product that forms when two solutions are mixed is a precipitate, so it is (s).
  • A molten ionic compound is (l), because it is melted, not dissolved in water.
  • If you are given melting and boiling points, compare them with the temperature of the reaction.

Higher tier only

Ionic equations. In an ionic equation, ions dissolved in water are (aq). Metals, precipitates, gases and water keep the same state symbols as in the full equation.

Adding state symbols

Sodium burns in chlorine gas to form sodium chloride, a white solid. The sodium chloride is then dissolved in water. Write both equations with state symbols.

Sodium is a solid metal, chlorine is a gas and sodium chloride forms as a solid:

2Na(s) + Cl₂(g) → 2NaCl(s)

When the solid dissolves, it becomes a solution of sodium chloride in water, so its state symbol changes to (aq):

NaCl(s) → NaCl(aq)

Common mistakes

  • Writing (aq) for water. Pure water is H₂O(l).
  • Writing (l) for a solution. Dissolved substances are (aq); (l) is for a pure liquid or a molten substance.
  • Writing (aq) for a precipitate. A precipitate is insoluble, so it is (s).
  • Giving a metal (aq) because it was added to a solution. The metal is still a solid.

Exam tip

Look for clues in the question: "powder", "ribbon", "chips" and "precipitate" mean (s); "solution" and "dilute" mean (aq); "bubbles", "fizzing" and "given off" mean (g); "molten" means (l).

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.