Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Atomic structure and the periodic table
Unit 2
Bonding, structure, and the properties of matter
Unit 3
Quantitative chemistry
Unit 4
Chemical changes
Unit 5
Energy changes
Avg
score:
–
Topics
done:
0/55

The energy change of reactions (HT only)

Practise 14 exam-style questions on The energy change of reactions (HT only) for AQA GCSE Combined Science (Chemistry Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

In an endothermic reaction, which is greater: the energy needed to break the bonds in the reactants, or the energy released when the bonds in the products are formed?

Model answer

The energy needed to break the bonds in the reactants is greater.

Explanation

In an endothermic reaction, more energy is taken in to break existing bonds than is given out when new bonds form, so overall energy is taken in from the surroundings.

Mark scheme
  1. 1 mark

    the energy needed to break the bonds (in the reactants)

Question 2

3 marks

Hydrogen reacts with chlorine to form hydrogen chloride:

H–H + Cl–Cl → 2 H–Cl

Bond energies:
H–H 436 kJ/mol
Cl–Cl 243 kJ/mol
H–Cl 432 kJ/mol

Calculate the overall energy change for this reaction.

Model answer

Energy needed to break bonds = 436 + 243 = 679 kJ/mol
Energy released forming bonds = 2 × 432 = 864 kJ/mol
Overall energy change = 679 − 864 = −185 kJ/mol

Explanation

Overall energy change = energy needed to break bonds − energy released forming bonds. Two H–Cl bonds form, so the H–Cl bond energy must be doubled. The negative sign shows that energy is released: the reaction is exothermic.

Mark scheme
  1. 1 mark

    energy to break bonds = 436 + 243 = 679 (kJ/mol)

    an answer of −185 (kJ/mol) scores 3 marks

  2. 1 mark

    energy released forming bonds = 2 × 432 = 864 (kJ/mol)

  3. 1 mark

    overall energy change = 679 − 864 = −185 (kJ/mol)

    allow ecf; allow 185 kJ/mol released / given out; +185 scores 2 marks

Question 3

3 marks

At very high temperatures, such as in a car engine, nitrogen reacts with oxygen to form nitrogen monoxide:

N≡N + O=O → 2 N=O

Bond energies:
N≡N 945 kJ/mol
O=O 498 kJ/mol
N=O 630 kJ/mol

Calculate the overall energy change for this reaction. State whether it is exothermic or endothermic.

Model answer

Energy needed to break bonds = 945 + 498 = 1443 kJ/mol
Energy released forming bonds = 2 × 630 = 1260 kJ/mol
Overall energy change = 1443 − 1260 = +183 kJ/mol
The reaction is endothermic.

Explanation

The triple bond in nitrogen is very strong, so a lot of energy is needed to break it - more than is released when the two N=O bonds form. A positive overall energy change means the reaction is endothermic.

Mark scheme
  1. 1 mark

    energy to break bonds = 945 + 498 = 1443 (kJ/mol)

    an answer of +183 (kJ/mol) with endothermic scores 3 marks

  2. 1 mark

    overall energy change = 1443 − (2 × 630) = 1443 − 1260 = +183 (kJ/mol)

    allow 183 kJ/mol taken in; allow ecf

  3. 1 mark

    endothermic

    allow ecf from the sign of the calculated value

Question 4

4 marks

Hydrogen peroxide decomposes to form water and oxygen:

2 H–O–O–H → 2 H–O–H + O=O

Bond energies:
O–H 464 kJ/mol
O–O 146 kJ/mol
O=O 498 kJ/mol

Calculate the overall energy change for this reaction. Explain what your answer shows.

Model answer

Bonds broken: 4 O–H and 2 O–O (two H–O–O–H molecules)
Energy needed = (4 × 464) + (2 × 146) = 1856 + 292 = 2148 kJ/mol
Bonds formed: 4 O–H and 1 O=O
Energy released = (4 × 464) + 498 = 1856 + 498 = 2354 kJ/mol
Overall energy change = 2148 − 2354 = −206 kJ/mol
The negative value shows the reaction is exothermic: more energy is released when the bonds in the products form than is needed to break the bonds in the reactants.

Explanation

The four O–H bonds are broken and re-formed, so they cancel out; the difference comes from breaking two weak O–O bonds and forming one strong O=O bond. That is why the decomposition gives out energy.

Mark scheme
  1. 1 mark

    energy to break bonds = 2 × [(2 × 464) + 146] = 2148 (kJ/mol)

    an overall energy change of −206 (kJ/mol) scores the first 3 marks; allow 4 × 464 + 2 × 146

  2. 1 mark

    energy released forming bonds = (4 × 464) + 498 = 2354 (kJ/mol)

  3. 1 mark

    overall energy change = 2148 − 2354 = −206 (kJ/mol)

    allow ecf

  4. 1 mark

    the reaction is exothermic: more energy is released forming the bonds in the products than is needed to break the bonds in the reactants

    allow ecf from an incorrect sign

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

The energy change of reactions (HT only)

The big idea

In every chemical reaction, bonds in the reactants are broken and new bonds are made in the products. Breaking bonds needs energy; making bonds releases energy. Whether a reaction is exothermic or endothermic depends on which of these is bigger, and you can calculate the overall energy change from bond energies.

Breaking and making bonds

  • A covalent bond is a strong attraction between a shared pair of electrons and the nuclei of the two atoms. Energy must be supplied to overcome this attraction, so breaking bonds is endothermic.
  • Energy is released when a bond forms, so making bonds is exothermic. Forming a bond releases the same amount of energy as is needed to break that bond.
Type of reactionEnergy needed to break bonds in the reactantsEnergy released forming bonds in the products
Exothermicsmallergreater
Endothermicgreatersmaller

Bond energies

A bond energy is the energy needed to break one mole of a particular bond, in kJ/mol. For example, the C–H bond energy is 412 kJ/mol. Bond energies are average values taken from many different compounds, so a calculated energy change is close to, but not exactly the same as, a measured one.

\[\text{overall energy change} = \text{energy needed to break bonds} - \text{energy released forming bonds}\]
  • A negative answer means more energy is released than is taken in: the reaction is exothermic.
  • A positive answer means more energy is taken in than is released: the reaction is endothermic.

The method

  1. Draw (or picture) the displayed formula of every molecule, so you can see every bond.
  2. Use the balancing numbers in the equation to count how many of each bond are broken and how many are formed.
  3. Multiply each number of bonds by its bond energy, then add them up: one total for bonds broken and one for bonds formed.
  4. Subtract: bonds broken − bonds formed. Give the sign and the unit, kJ/mol.

Shortcut: a bond that is broken and then made again (often a C–H bond) cancels out, so you can count only the bonds that change. Both methods give the same answer.

Adding steam to ethene

Ethanol can be made by reacting ethene with steam. Calculate the overall energy change for the reaction.

Displayed formula of ethene (labelled "Ethene") plus H–O–H arrow to displayed formula of ethanol (labelled "Ethanol"). (Ethene = ethene; Ethanol = ethanol.)
Ethene + water → ethanol, with every bond shown.

Use these bond energies, in kJ/mol: O–H 464, C–O 360, C=C 612, C–C 348, C–H 412

Bonds broken: 1 C=C and 4 C–H in ethene, and 2 O–H in water

\(612 + (4 \times 412) + (2 \times 464) = 612 + 1648 + 928 = 3188\) kJ

Bonds formed: 1 C–C, 5 C–H, 1 C–O and 1 O–H in ethanol

\(348 + (5 \times 412) + 360 + 464 = 348 + 2060 + 360 + 464 = 3232\) kJ

Overall energy change: \(3188 - 3232 = -44\) kJ/mol, so the reaction is exothermic.

Shortcut check: only C=C and one O–H are broken (\(612 + 464 = 1076\) kJ), and only C–C, one C–H and C–O are formed (\(348 + 412 + 360 = 1120\) kJ). \(1076 - 1120 = -44\) kJ/mol.

An endothermic reaction

Methanol, CH₃OH, can be split up to give carbon monoxide and hydrogen:

CH₃OH(g) → CO(g) + 2H₂(g)

Use these bond energies, in kJ/mol: C≡O 1077, H–H 436, C–H 412, C–O 360, O–H 464

Bonds broken: methanol has 3 C–H, 1 C–O and 1 O–H bonds

\((3 \times 412) + 360 + 464 = 1236 + 360 + 464 = 2060\) kJ

Bonds formed: 1 C≡O and 2 H–H

\(1077 + (2 \times 436) = 1077 + 872 = 1949\) kJ

Overall energy change: \(2060 - 1949 = +111\) kJ/mol. More energy is needed to break the bonds than is released when the new bonds form, so the reaction is endothermic and must be heated to keep it going.

Remember

  • Breaking bonds takes in energy (endothermic); making bonds releases energy (exothermic).
  • Overall energy change = energy needed to break bonds − energy released forming bonds.
  • Negative answer: exothermic. Positive answer: endothermic.

Common mistakes

  • Saying energy is released when bonds break. Breaking bonds always needs energy.
  • Subtracting the wrong way round (bonds formed − bonds broken). This gives the right number with the wrong sign. Always do broken − formed.
  • Ignoring the balancing numbers: 3O₂ means three O=O bonds to break.
  • Miscounting bonds. A water molecule has two O–H bonds, and ethanol has five C–H bonds plus one O–H bond. Drawing the displayed formula helps.
  • Forgetting that the answer is for the equation as written. If the equation contains 2 moles of a substance, divide by 2 to get the energy change per mole of that substance.

Exam tip

These calculations are often worth 3-5 marks. Write the two totals with labels ("bonds broken = ...", "bonds formed = ..."), so you can still earn method marks if you slip with the arithmetic. End with the sign, the unit and whether the reaction is exothermic or endothermic.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.