Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Maths (Foundation calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number Operations and Integers
Unit 2
Fractions, Decimals and Percentages
Unit 3
Indices and Surds
Unit 4
Approximation and Estimation
Unit 5
Ratio, Proportion and Rates of Change
Unit 6
Algebra
Unit 7
Graphs of Equations and Functions
Unit 8
Basic Geometry
Unit 9
Congruence and Similarity
Unit 10
Mensuration
Unit 11
Probability
Unit 12
Statistics
Avg
score:
–
Topics
done:
0/100

Spheres, cones and composite solids

Practise 13 exam-style questions on Spheres, cones and composite solids for OCR GCSE Maths (Foundation calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 2–4 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

The diagram shows a plumb bob.
It is a solid metal cone with radius 2.4 cm and perpendicular height 6.5 cm.

Work out the volume of the plumb bob.
Give your answer correct to 1 decimal place.

[The volume, V, of a cone with radius r and perpendicular height h is \(V = \dfrac{1}{3}\pi r^2 h\).]

A cone drawn in 3D (hidden edges dashed). The radius is labelled 2.4 cm (on a dashed line from the centre of the base to its edge). The perpendicular height is labelled 6.5 cm (beside a dashed vertical line from the top down to the centre of the base, with a right angle marked there). The diagram is labelled "Not to scale".

Model answer

\(V = \dfrac{1}{3} \times \pi \times 2.4^2 \times 6.5\)
= \(\dfrac{1}{3} \times \pi \times 5.76 \times 6.5\)
= 39.207... cm³
= 39.2 cm³ (to 1 d.p.)

Explanation

Substitute r = 2.4 and h = 6.5 into the formula given. Square the radius before multiplying by \(\pi\) and the height, and remember the \(\dfrac{1}{3}\): a cone holds a third as much as a cylinder with the same radius and height.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{1}{3} \times \pi \times 2.4^2 \times 6.5\) oe

    2.4 and 6.5 are exact values from the question. Award M1 for 39.2... seen; correct answer with no working scores full marks

  2. 1 mark

    A1 for 39.2

    Accept 39.2 cm³, or any value from 39.18 to 39.22 (calculator value 39.207...; 39.212 from \(\pi = 3.142\); 39.187 from \(\pi = 3.14\)). 117.6 (the \(\dfrac{1}{3}\) left out) scores M0 A0. 156.8 (4.8 used as the radius) scores M0 A0. A correct answer of 39.2 with no working scores 2 marks.

Question 2

3 marks

An igloo is in the shape of a hemisphere, as shown in the diagram.
The inside of the igloo has radius 1.6 m.

Work out the volume of space inside the igloo.
Give your answer correct to 3 significant figures.

[The volume, V, of a sphere with radius r is \(V = \dfrac{4}{3}\pi r^3\).]

A hemisphere drawn in 3D (hidden edges dashed), flat face down. The radius is labelled 1.6 m (on a dashed line from the centre of the base to its edge). The diagram is labelled "Not to scale".

Model answer

Volume of a whole sphere with radius 1.6 m = \(\dfrac{4}{3} \times \pi \times 1.6^3 = 17.157...\) m³
A hemisphere is half a sphere.
Volume inside the igloo = \(17.157... \div 2 = 8.578...\) m³
= 8.58 m³ (to 3 s.f.)

Explanation

A hemisphere is half of a sphere, so use the sphere formula and then halve the answer. Keep the full calculator value until the end. A common mistake is to forget to halve.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{4}{3} \times \pi \times 1.6^3\) oe

    The volume of the whole sphere, 17.15... or 17.16 (accept 17.1 to 17.16). 1.6 is an exact value from the question; correct answer with no working scores full marks

  2. 1 mark

    M1 for their sphere volume \(\div 2\)

    Or \(\dfrac{2}{3} \times \pi \times 1.6^3\).

  3. 1 mark

    A1 for 8.58

    Accept 8.58 m³, or a more accurate value from 8.578 to 8.58 (calculator value 8.5786...; 8.5797 from \(\pi = 3.142\)). 8.57 (from \(\pi = 3.14\), or truncated) scores M1 M1 A0. 17.2 (not halved) scores M1 M0 A0. 68.6 (3.2 used as the radius, then halved) scores M0 M1 A0. If 0 scored, SC1 for their answer to more than 3 figures correctly rounded to 3 s.f.

Question 3

3 marks

A glass is in the shape of a cone with radius 4 cm and perpendicular height 12 cm.
A bowl is in the shape of a hemisphere with radius 4.6 cm.

Asha says,
"The glass holds more than the bowl."

Is Asha correct?
Show how you decide.

[The volume, V, of a cone with radius r and perpendicular height h is \(V = \dfrac{1}{3}\pi r^2 h\).]
[The volume, V, of a sphere with radius r is \(V = \dfrac{4}{3}\pi r^3\).]

Model answer

Glass: \(V = \dfrac{1}{3} \times \pi \times 4^2 \times 12 = 201.06...\) cm³
Bowl: \(V = \dfrac{1}{2} \times \dfrac{4}{3} \times \pi \times 4.6^3 = 203.86...\) cm³
203.86... is more than 201.06..., so the bowl holds more.
Asha is not correct.

Explanation

Work out the volume of each container. The bowl is half a sphere, so halve the sphere formula. The two volumes are close (about 201 cm³ and 204 cm³), so you need to use accurate values to compare them. The glass is taller, but the bowl still holds more.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{1}{3} \times \pi \times 4^2 \times 12\) oe

    The glass, 201.06... (accept 201 to 201.1) or \(64\pi\).

  2. 1 mark

    M1 for \(\dfrac{1}{2} \times \dfrac{4}{3} \times \pi \times 4.6^3\) oe

    The bowl, 203.86... (accept 203.8 to 203.9).

  3. 1 mark

    A1 for No, with 201 (or better) and 204 or 203.9 (or better)

    Needs the decision (No, the bowl holds more, oe) and both volumes. Accept values that round to 201 and 204 with 3 s.f. or more. 'Yes' from 603.2 for the glass (the \(\dfrac{1}{3}\) left out) scores M0 M1 A0. 'No' with no working scores 0.

Question 4

4 marks

A ball bearing is a solid steel sphere with radius 0.6 cm.
The density of the steel is 7.8 g/cm³.

Work out the total mass of 500 ball bearings.
Give your answer in kilograms, correct to 2 decimal places.

[The volume, V, of a sphere with radius r is \(V = \dfrac{4}{3}\pi r^3\).]

Model answer

Volume of one ball bearing = \(\dfrac{4}{3} \times \pi \times 0.6^3 = 0.90477...\) cm³
Mass of one = density \(\times\) volume = \(7.8 \times 0.90477... = 7.0572...\) g
Mass of 500 = \(500 \times 7.0572... = 3528.6...\) g
\(3528.6... \div 1000 = 3.5286...\) kg
= 3.53 kg (to 2 d.p.)

Explanation

Find the volume of one sphere, then use mass = density \(\times\) volume, since each cm³ of steel has a mass of 7.8 g. Multiply by 500 and divide by 1000 to change grams into kilograms. Rounding the volume to 0.9 cm³ too early gives 3.51 kg, which is wrong to 2 decimal places.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{4}{3} \times \pi \times 0.6^3\) oe

    Volume of one ball bearing, 0.9047... (accept 0.904 to 0.905; 0.904896 from \(\pi = 3.142\)); correct answer with no working scores full marks

  2. 1 mark

    M1 for their volume \(\times 7.8\)

    Mass of one ball bearing, 7.057... g (accept 7.05 to 7.06). Mass = density \(\times\) volume. Their volume \(\div 7.8\) scores M0.

  3. 1 mark

    M1 for their mass of one \(\times 500 \div 1000\)

    3528.6... g (accept 3528 to 3530) converted to kilograms. Award at any stage, e.g. \(500 \times 0.9047... = 452.38\) cm³ first.

  4. 1 mark

    A1 for 3.53

    Accept 3.53 kg, or any value from 3.527 to 3.53 (calculator value 3.5286...; 3.5291 from \(\pi = 3.142\)). 3528.6 or 3529 (grams, not converted) scores M1 M1 M0 A0. 3.51 (volume rounded to 0.9 too early) scores M1 M1 M1 A0. 0.06 (dividing by the density) scores M1 M0 M1 A0. A correct answer of 3.53 with no working scores 4 marks.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.