Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Maths (Foundation calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number Operations and Integers
Unit 2
Fractions, Decimals and Percentages
Unit 3
Indices and Surds
Unit 4
Approximation and Estimation
Unit 5
Ratio, Proportion and Rates of Change
Unit 6
Algebra
Unit 7
Graphs of Equations and Functions
Unit 8
Basic Geometry
Unit 9
Congruence and Similarity
Unit 10
Mensuration
Unit 11
Probability
Unit 12
Statistics
Avg
score:
–
Topics
done:
0/100

Comparing data and misleading graphs

Practise 13 exam-style questions on Comparing data and misleading graphs for OCR GCSE Maths (Foundation calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Ali wants to compare the weather in his town in England with the weather in Madrid.

He works out

the mean daily temperature in his town in January,

the mean daily temperature in Madrid in July.

Explain why this is not a fair comparison.

Model answer

Ali is comparing a winter month in his town with a summer month in Madrid. Temperatures are usually much lower in January than in July, so the comparison is not like for like. He should compare the same month in both places.

Explanation

To compare two data sets fairly, the summary values must be worked out in the same way from comparable data. Using different months adds a seasonal difference that has nothing to do with the two places, so Ali should use the same month (or the whole year) for both.

Mark scheme
  1. 1 mark

    B1 for the temperatures are for different months (winter and summer), so he should compare the same month for both places oe

    Accept 'January is winter and July is summer', 'it is not like for like'. Do not accept 'Madrid is hotter' or 'the samples are too small'.

Question 2

2 marks

Give one advantage and one disadvantage of using the median, rather than the mean, as the average of a set of data.

Model answer

Advantage: the median is not affected by extreme values, because it only depends on the middle of the ordered data.
Disadvantage: the median does not use all the values, so it ignores information about the rest of the data.

Explanation

The mean uses every value, which is good, but one very large or very small value can pull it a long way. The median is the middle value, so it gives a better typical value when there are extreme values, but it takes no account of the sizes of the other values.

Mark scheme
  1. 1 mark

    B1 for advantage: the median is not affected by extreme values (outliers) oe

    Accept 'one very large or very small value does not change it much', 'it is easy to find from ordered data'. Do not accept 'it is more accurate'; correct answer with no working scores full marks

  2. 1 mark

    B1 for disadvantage: the median does not use all of the values oe

    Accept 'it only uses the middle value(s)', 'you have to put the data in order first'. Do not accept 'it is affected by extreme values'.

Question 3

3 marks

Machines A and B fill bottles with water.
Each bottle should contain 330 ml.

The back-to-back stem-and-leaf diagram shows the volumes, in ml, of 11 bottles filled by each machine.

The factory wants to use the machine that fills bottles most consistently with about 330 ml.

Which machine should the factory use?
Use the medians and the ranges to support your answer.

Back-to-back stem and leaf diagram. Key: 6 | 32 | 2 means 326 ml for Machine A and 322 ml for Machine B. The stems are in the middle column; "Machine A" leaves are on the left, read outwards from the stem (smallest next to the stem), and "Machine B" leaves are on the right. Rows (Machine A leaves | stem | Machine B leaves): none | 31 | 8; 6 7 8 9 9 | 32 | 2 5 8; 0 1 1 2 3 5 | 33 | 0 1 3 5 7; none | 34 | 0 3.

Model answer

Machine A: median = 330 ml, range = 335 − 326 = 9 ml
Machine B: median = 331 ml, range = 343 − 318 = 25 ml
Both medians are close to 330 ml, but Machine A has a much smaller range, so its volumes are more consistent.
The factory should use Machine A.

Explanation

Both machines give a typical volume close to 330 ml, so the averages do not separate them much. The ranges show that Machine B's volumes vary a lot, from 318 ml to 343 ml, while Machine A's stay between 326 ml and 335 ml. Read the left-hand leaves outwards from the stem carefully.

Mark scheme
  1. 1 mark

    B1 for medians: A 330 (ml) and B 331 (ml)

    The 6th value on each side; correct answer with no working scores full marks

  2. 1 mark

    B1 for ranges: A 9 (ml) and B 25 (ml)

    A: 335 − 326; B: 343 − 318.

  3. 1 mark

    B1 for Machine A, because its range is smaller (more consistent) and its median is (very close to) 330 ml oe

    FT their medians and ranges. Must mention the smaller range (consistency). Choosing B scores B0.

Question 4

4 marks

The table shows the ratings given by guests to two hotels, A and B.
Each guest gave a rating from 1 star to 5 stars.

Work out the mean rating for each hotel.
Give your answers correct to 2 decimal places.
Which hotel has the higher mean rating?

Table with columns "Rating (stars)", "Hotel A frequency", "Hotel B frequency". Rating (stars): 1; Hotel A frequency: 3; Hotel B frequency: 4 | Rating (stars): 2; Hotel A frequency: 5; Hotel B frequency: 3 | Rating (stars): 3; Hotel A frequency: 12; Hotel B frequency: 4 | Rating (stars): 4; Hotel A frequency: 28; Hotel B frequency: 5 | Rating (stars): 5; Hotel A frequency: 32; Hotel B frequency: 14.

Model answer

Hotel A: total = \(1 \times 3 + 2 \times 5 + 3 \times 12 + 4 \times 28 + 5 \times 32 = 321\)
Number of guests = 80, mean = \(321 \div 80 = 4.0125\) = 4.01
Hotel B: total = \(1 \times 4 + 2 \times 3 + 3 \times 4 + 4 \times 5 + 5 \times 14 = 112\)
Number of guests = 30, mean = \(112 \div 30 = 3.733...\) = 3.73
Hotel A has the higher mean rating.

Explanation

The hotels had different numbers of guests, so the totals cannot be compared directly: work out the mean for each hotel, which is a like-for-like value. Multiply each rating by its frequency, add, and divide by the number of guests for that hotel. Hotel B has a higher percentage of 5-star ratings, but more low ratings too, so its mean is lower.

Mark scheme
  1. 1 mark

    M1 for the total of the ratings for either hotel, 321 (A) or 112 (B)

    A: 3 + 10 + 36 + 112 + 160 = 321. B: 4 + 6 + 12 + 20 + 70 = 112. Exact values; correct answer with no working scores full marks

  2. 1 mark

    M1 for their \(321 \div 80\) or their \(112 \div 30\)

    Division by the number of guests for that hotel (80 or 30).

  3. 1 mark

    A1 for 4.01 (A) and 3.73 (B)

    Accept A 4.01 to 4.0125 and B 3.73 to 3.734 (calculator values 4.0125 and 3.7333...). 64.2 (from \(321 \div 5\)) scores M1 M0 A0.

  4. 1 mark

    B1 for Hotel A

    FT their two means.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.