Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Maths (Higher non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number Operations and Integers
Unit 2
Fractions, Decimals and Percentages
Unit 3
Indices and Surds
Unit 4
Approximation and Estimation
Unit 5
Ratio, Proportion and Rates of Change
Unit 6
Algebra
Unit 7
Graphs of Equations and Functions
Unit 8
Basic Geometry
Unit 9
Congruence and Similarity
Unit 10
Mensuration
Unit 11
Probability
Unit 12
Statistics
Avg
score:
–
Topics
done:
0/121

Spheres, cones and composite solids

Practise 17 exam-style questions on Spheres, cones and composite solids for OCR GCSE Maths (Higher non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 2–5 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

A sphere has diameter 10 cm.

Work out the surface area of the sphere.
Give your answer in terms of \(\pi\).

The surface area, \(A\), of a sphere with radius \(r\) is \(A = 4\pi r^2\).

Model answer

Radius = \(10 \div 2 = 5\) cm
\(A = 4 \times \pi \times 5^2 = 100\pi\) cm²

Explanation

The formula uses the radius, so halve the diameter first. Then 4 × 25 = 100, giving 100π cm². Using 10 as the radius makes the answer four times too big.

Mark scheme
  1. 1 mark

    M1 for \(4 \times \pi \times 5^2\)

    The radius 5 must be used; correct answer with no working scores full marks

  2. 1 mark

    A1 for \(100\pi\)

    Accept \(100\pi\) cm². \(400\pi\) (diameter used as radius) scores M0 A0.

Question 2

3 marks

The diagram shows a solid hemisphere with radius 4 cm.

Work out the total surface area of the hemisphere.
Give your answer in terms of \(\pi\).

The surface area, \(A\), of a sphere with radius \(r\) is \(A = 4\pi r^2\).

A hemisphere drawn in 3D (hidden edges dashed), flat face down. The radius is labelled 4 cm (on a dashed line from the centre of the base to its edge). The diagram is labelled "Not to scale".

Model answer

Curved surface = half of the sphere's surface = \(\dfrac{1}{2} \times 4 \times \pi \times 4^2 = 32\pi\) cm²
Flat circular face = \(\pi \times 4^2 = 16\pi\) cm²
Total surface area = \(32\pi + 16\pi = 48\pi\) cm²

Explanation

A solid hemisphere has two surfaces: the curved dome, which is half of 4πr², and the flat circular base, πr². Together they make 3πr² = 48π. Forgetting the flat face is the most common error.

Mark scheme
  1. 1 mark

    M1 for curved surface = \(\dfrac{1}{2} \times 4 \times \pi \times 4^2\) or \(32\pi\)

    correct answer with no working scores full marks

  2. 1 mark

    M1 for flat face = \(\pi \times 4^2\) or \(16\pi\)

  3. 1 mark

    A1 for \(48\pi\)

    Accept \(48\pi\) cm². \(32\pi\) (flat face left out) scores M1 M0 A0. \(64\pi\) (whole sphere) scores M0 M0 A0; \(80\pi\) (whole sphere plus circle) scores M0 M1 A0.

Question 3

3 marks

A solid hemisphere and a solid cylinder have the same radius, \(r\) cm.
The volume of the cylinder is three times the volume of the hemisphere.

Show that the height of the cylinder is \(2r\) cm.

The volume, \(V\), of a sphere with radius \(r\) is \(V = \dfrac{4}{3}\pi r^3\).

Model answer

Volume of hemisphere = \(\dfrac{1}{2} \times \dfrac{4}{3}\pi r^3 = \dfrac{2}{3}\pi r^3\)
Let the height of the cylinder be \(h\).
\(\pi r^2 h = 3 \times \dfrac{2}{3}\pi r^3 = 2\pi r^3\)
Divide both sides by \(\pi r^2\): \(h = 2r\)

Explanation

Write both volumes in terms of r and h, form an equation and divide both sides by πr². The hemisphere is half of 4/3 πr³, so three hemispheres make 2πr³. Using the whole sphere instead of half gives the wrong height, 4r.

Mark scheme
  1. 1 mark

    M1 for volume of hemisphere = \(\dfrac{1}{2} \times \dfrac{4}{3}\pi r^3\) or \(\dfrac{2}{3}\pi r^3\)

  2. 1 mark

    M1 for \(\pi r^2 h = 3 \times \dfrac{2}{3}\pi r^3\) oe

    FT their hemisphere volume.

  3. 1 mark

    A1 for \(\pi r^2 h = 2\pi r^3\) leading to \(h = 2r\)

    The division by \(\pi r^2\) must be clear. This is a 'show that' question: answer only scores 0.

Question 4

4 marks

A solid metal sphere has radius 6 cm.
The sphere is melted down and all the metal is used to make solid cones.
Each cone has radius 3 cm and perpendicular height 4 cm.

Work out the number of cones made.

The volume, \(V\), of a sphere with radius \(r\) is \(V = \dfrac{4}{3}\pi r^3\).
The volume, \(V\), of a cone with radius \(r\) and perpendicular height \(h\) is \(V = \dfrac{1}{3}\pi r^2 h\).

Model answer

Volume of sphere = \(\dfrac{4}{3} \times \pi \times 6^3 = 288\pi\) cm³
Volume of one cone = \(\dfrac{1}{3} \times \pi \times 3^2 \times 4 = 12\pi\) cm³
Number of cones = \(288\pi \div 12\pi = 24\)

Explanation

When metal is melted and reshaped, the volume stays the same. Divide the sphere's volume by one cone's volume; π cancels, leaving 288 ÷ 12 = 24.

Mark scheme
  1. 1 mark

    M1 for volume of sphere = \(\dfrac{4}{3} \times \pi \times 6^3\) or \(288\pi\)

    correct answer with no working scores full marks

  2. 1 mark

    M1 for volume of one cone = \(\dfrac{1}{3} \times \pi \times 3^2 \times 4\) or \(12\pi\)

  3. 1 mark

    M1 for their \(288\pi \div\) their \(12\pi\)

  4. 1 mark

    A1 for 24

    A correct answer with no working scores 4.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.