Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Maths (Higher non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number Operations and Integers
Unit 2
Fractions, Decimals and Percentages
Unit 3
Indices and Surds
Unit 4
Approximation and Estimation
Unit 5
Ratio, Proportion and Rates of Change
Unit 6
Algebra
Unit 7
Graphs of Equations and Functions
Unit 8
Basic Geometry
Unit 9
Congruence and Similarity
Unit 10
Mensuration
Unit 11
Probability
Unit 12
Statistics
Avg
score:
–
Topics
done:
0/121

Plans and elevations

Practise 13 exam-style questions on Plans and elevations for OCR GCSE Maths (Higher non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

The diagram shows a solid made from cubes.
The arrows show the front and the side of the solid.

Write down the number of squares in the plan of the solid.
Write down the number of squares in the front elevation of the solid.

A solid made from cubes, drawn on isometric paper: 3 cubes wide, 2 deep and up to 3 high, standing on a flat base (every stack goes down to the base). An arrow labelled "Front" points at the front of the solid and an arrow labelled "Side" points at its right-hand side.

Model answer

Plan (the view from above): one square for each stack of cubes, so 5 squares.
Front elevation: the tallest stack in each column, seen from the front, gives columns of 3, 2 and 1 squares, so 6 squares.

Explanation

The plan is the view from directly above, so every stack shows as one square however tall it is. The front elevation is the view from the front: each column shows the height of its tallest stack, because shorter stacks are hidden behind or in front of it.

Mark scheme
  1. 1 mark

    B1 for 5 squares in the plan

    The plan shows one square for each stack; correct answer with no working scores full marks

  2. 1 mark

    B1 for 6 squares in the front elevation

    Columns of 3, 2 and 1 squares from left to right. 8 (the number of cubes) scores B0.

Question 2

2 marks

The diagram shows a solid made from 9 cubes.
The arrows show the front and the side of the solid.

Ellie says,
"The side elevation of the solid is made up of 9 squares."

Is Ellie correct?
Show how you decide.

A solid made from cubes, drawn on isometric paper: 2 cubes wide, 3 deep and up to 3 high, standing on a flat base (every stack goes down to the base). An arrow labelled "Front" points at the front of the solid and an arrow labelled "Side" points at its right-hand side.

Model answer

From the side, each row of stacks (back, middle, front) shows as one column, as tall as its tallest stack.
Back row: 3, middle row: 2, front row: 1.
The side elevation has \(3 + 2 + 1 = 6\) squares, not 9, so Ellie is not correct.

Explanation

An elevation shows the outline seen from one direction, so cubes hidden behind other cubes are not counted again. Ellie has counted every cube. Seen from the side, the stacks in each row line up one behind another.

Mark scheme
  1. 1 mark

    M1 for the side elevation column heights 3, 2 and 1 (back row to front row)

    The tallest stack in each row, seen from the side.

  2. 1 mark

    A1 for No, the side elevation has 6 squares

    A conclusion with 6 is needed.

Question 3

3 marks

The diagram shows a solid made from cubes.
Each cube has edges of length 2 cm.
The arrows show the front and the side of the solid.

Work out the area of the front elevation of the solid.

A solid made from cubes, drawn on isometric paper: 3 cubes wide, 2 deep and up to 3 high, standing on a flat base (every stack goes down to the base). An arrow labelled "Front" points at the front of the solid and an arrow labelled "Side" points at its right-hand side.

Model answer

From the front, each column shows its tallest stack: 1, 2 and 3 cubes, so the front elevation has \(1 + 2 + 3 = 6\) squares.
Each square is \(2 \times 2 = 4 \text{ cm}^2\).
Area = \(6 \times 4 = 24 \text{ cm}^2\)

Explanation

First find how many cube faces make up the front view, then multiply by the area of one face. With 2 cm cubes each face is 4 cm², not 2 cm².

Mark scheme
  1. 1 mark

    M1 for 6 squares in the front elevation (columns of 1, 2 and 3)

    correct answer with no working scores full marks

  2. 1 mark

    M1 for the area of one square = \(2 \times 2\) or 4 cm²

  3. 1 mark

    A1 for 24 cm²

    From \(6 \times 4\). 12 (using 2 cm² per square) scores M1 M0 A0. 10 or 40 (counting all the cubes) scores M0 M1 A0.

Question 4

4 marks

The diagram shows the front elevation and the plan of a solid concrete block.
The block is a prism with an L-shaped cross-section.

Work out the volume of the block.

Geometry diagram, marked "Not to scale". A hexagon (its vertices are not labelled). A rectangle (its vertices are not labelled). A vertical line with no labelled ends is drawn. The unlabelled side going to the right is labelled 8 m. The unlabelled side going upwards is labelled 6 m. The unlabelled side going to the right is labelled 3 m. The unlabelled side going upwards is labelled 2 m. The unlabelled side going upwards is labelled 4 m. The text "Front elevation" is written. The text "Plan" is written.

Model answer

Area of the L-shaped cross-section (front elevation):
\(3 \times 6 + 5 \times 2 = 18 + 10 = 28 \text{ m}^2\)
The plan shows the block is 4 m from front to back.
Volume = \(28 \times 4 = 112 \text{ m}^3\)

Explanation

The front elevation shows the cross-section of the prism and the plan shows how far it goes back. The volume of a prism is the area of its cross-section times its length. Split the L shape into two rectangles, or take a small rectangle away from a large one.

Mark scheme
  1. 1 mark

    M1 for a correct method for the area of the L shape, e.g. \(3 \times 6 + 5 \times 2\) or \(8 \times 6 - 5 \times 4\)

    The figure: the front elevation is an L shape 8 m wide (bottom) and 6 m high (left side); its tall part is 3 m wide (top edge) and the low part on the right is 2 m high. The plan is a rectangle 8 m by 4 m (front to back), with a line 3 m from the left where the height changes; correct answer with no working scores full marks

  2. 1 mark

    A1 for 28 m²

  3. 1 mark

    M1 for their 28 \(\times\) 4

    The length of the prism (4 m) is read from the plan.

  4. 1 mark

    A1 for 112 m³

    Accept 112. Correct answer with no working scores 4 marks. \(8 \times 6 \times 4 = 192\) scores M0 A0 M1 A0.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.