Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Maths (Higher non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number Operations and Integers
Unit 2
Fractions, Decimals and Percentages
Unit 3
Indices and Surds
Unit 4
Approximation and Estimation
Unit 5
Ratio, Proportion and Rates of Change
Unit 6
Algebra
Unit 7
Graphs of Equations and Functions
Unit 8
Basic Geometry
Unit 9
Congruence and Similarity
Unit 10
Mensuration
Unit 11
Probability
Unit 12
Statistics
Avg
score:
–
Topics
done:
0/121

Exact calculations

Practise 17 exam-style questions on Exact calculations for OCR GCSE Maths (Higher non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

A semicircle has a radius of 5 cm.

Work out the area of the semicircle.
Give your answer in terms of \(\pi\).

Model answer

Area of the full circle = \(\pi \times 5^2 = 25\pi\)
Area of the semicircle = \(\dfrac{25\pi}{2} = 12.5\pi\) cm²

Explanation

A semicircle is half a circle, so find the area of the full circle and halve it. The answer can be written as \(\dfrac{25\pi}{2}\) or \(12.5\pi\); both are exact. A common error is to halve the radius instead of the area.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{1}{2} \times \pi \times 5^2\) oe

    Implied by \(25\pi\) seen then halved; correct answer with no working scores full marks

  2. 1 mark

    A1 for \(\dfrac{25}{2}\pi\) oe

    Accept \(12.5\pi\), \(\dfrac{25\pi}{2}\) or \(12\dfrac{1}{2}\pi\). \(25\pi\) scores M0 A0. 39.3 (a decimal) scores M1 A0.

Question 2

3 marks

The diagram shows a flat metal washer.

The washer is the shaded region between two circles with the same centre.
The outer circle has diameter 5 cm.
The inner circle has diameter 3 cm.

Work out the area of the washer.
Give your answer in terms of \(\pi\).

Geometry diagram, marked "Not to scale". A circle (shaded). Another circle (filled white, so the inside of the circle is not shaded). A dashed horizontal line with no labelled ends is drawn. An unlabelled line going to the right is labelled 3 cm. A double-headed dimension arrow alongside an unlabelled line going to the right (the distance from an unlabelled point to an unlabelled point) is labelled 5 cm.

Model answer

Outer radius = \(\dfrac{5}{2}\) cm, inner radius = \(\dfrac{3}{2}\) cm
Area of the outer circle = \(\pi \times \left(\dfrac{5}{2}\right)^2 = \dfrac{25}{4}\pi\)
Area of the inner circle = \(\pi \times \left(\dfrac{3}{2}\right)^2 = \dfrac{9}{4}\pi\)
Area of the washer = \(\dfrac{25}{4}\pi - \dfrac{9}{4}\pi = \dfrac{16}{4}\pi = 4\pi\) cm²

Explanation

The washer is the outer circle with the inner circle removed, so subtract the two areas. Halve each diameter first: the radii are \(\dfrac{5}{2}\) and \(\dfrac{3}{2}\), and squaring fractions keeps the answer exact. Common errors are using the diameters as radii (\(16\pi\)) and subtracting the radii before squaring (\(\pi\)).

Mark scheme
  1. 1 mark

    M1 for radii \(\dfrac{5}{2}\) and \(\dfrac{3}{2}\) (or 2.5 and 1.5) used

    Implied by \(\dfrac{25}{4}\pi\) (or \(6.25\pi\)) or \(\dfrac{9}{4}\pi\) (or \(2.25\pi\)); correct answer with no working scores full marks

  2. 1 mark

    M1 for \(\pi \times 2.5^2 - \pi \times 1.5^2\) oe

    Area of the outer circle minus area of the inner circle, using their radii or diameters. Implied by \(16\pi\) (from the diameters). Do not award for \(\pi \times (2.5 - 1.5)^2\).

  3. 1 mark

    A1 for \(4\pi\) (cm²)

    Accept \(\dfrac{16}{4}\pi\). Ignore units. \(16\pi\) (diameters used as radii) scores M0 M1 A0. \(\pi\) (from \(\pi \times (2.5 - 1.5)^2\)) scores M1 M0 A0. \(2\pi\) (difference of the circumferences) scores 0. 12.57 (a decimal) scores M1 M1 A0.

Question 3

3 marks

The diagram shows a circle inside a square.

The square has sides of length 10 cm.
The circle touches all four sides of the square.

Work out the area of the shaded region.
Give your answer in terms of \(\pi\).

Geometry diagram, marked "Not to scale". A circle (filled white, so the inside of the circle is not shaded). A square (its vertices are not labelled) (shaded). Sides an unlabelled line going to the right, an unlabelled line going upwards, an unlabelled line going to the left and an unlabelled line going downwards each touch the circle at one point (they are tangents). The unlabelled side going to the right is labelled 10 cm.

Model answer

Area of the square = \(10 \times 10 = 100\) cm²
The circle's diameter is 10 cm, so its radius is 5 cm.
Area of the circle = \(\pi \times 5^2 = 25\pi\) cm²
Shaded area = \(100 - 25\pi\) cm²

Explanation

The shaded region is the square with the circle removed. The circle touches all four sides, so its diameter equals the side of the square. 100 and \(25\pi\) are not like terms, so the exact answer stays as \(100 - 25\pi\). A common error is to use 10 cm as the radius.

Mark scheme
  1. 1 mark

    M1 for radius = 5 and \(\pi \times 5^2\) (= \(25\pi\))

    Area of the circle; correct answer with no working scores full marks

  2. 1 mark

    M1 for \(10 \times 10 -\) their \(25\pi\)

    Square minus circle.

  3. 1 mark

    A1 for \(100 - 25\pi\) (cm²) oe

    Accept \(25(4 - \pi)\). \(75\pi\) or 75 scores M1 M1 A0. \(100 - 100\pi\) (using radius 10) scores M0 M1 A0. 21.46 (a decimal) scores M1 M1 A0. Correct answer with no working scores 3 marks.

Question 4

4 marks

The diagram shows a sector of a circle, centre O, with radius 6 cm.

The length of the arc of the sector is \(5\pi\) cm.

Work out the area of the sector.
Give your answer in terms of \(\pi\).

Geometry diagram, marked "Not to scale". A shaded sector with centre O, bounded by the radii OA and OB and the minor arc from A to B. The arc from A to B is labelled 5π cm. OA is labelled 6 cm.

Model answer

Circumference of the full circle = \(2\pi \times 6 = 12\pi\) cm
Fraction of the circle = \(\dfrac{5\pi}{12\pi} = \dfrac{5}{12}\) (so the angle is \(\dfrac{5}{12} \times 360^\circ = 150^\circ\))
Area of the full circle = \(\pi \times 6^2 = 36\pi\) cm²
Area of the sector = \(\dfrac{5}{12} \times 36\pi = 15\pi\) cm²

Explanation

The arc is the same fraction of the circumference as the sector is of the circle's area. Comparing \(5\pi\) with \(12\pi\) gives \(\dfrac{5}{12}\) (the \(\pi\)s cancel exactly), and \(\dfrac{5}{12}\) of \(36\pi\) is \(15\pi\). You do not need the angle, but finding it (150°) is a valid route.

Mark scheme
  1. 1 mark

    M1 for circumference = \(2 \times \pi \times 6 = 12\pi\)

    Full circumference of the circle; correct answer with no working scores full marks

  2. 1 mark

    M1 for \(\dfrac{5\pi}{12\pi}\) (= \(\dfrac{5}{12}\)) or \(\dfrac{\theta}{360} \times 12\pi = 5\pi\) oe

    The fraction of the circle. Implied by an angle of 150°.

  3. 1 mark

    M1 for their \(\dfrac{5}{12} \times \pi \times 6^2\) oe

    Or \(\dfrac{150}{360} \times 36\pi\).

  4. 1 mark

    A1 for \(15\pi\) (cm²)

    cao. Correct answer with no working scores 4 marks. 47.1 (a decimal) scores M1 M1 M1 A0.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.