Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Maths (Higher non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/97

Similarity: lengths, areas and volumes

Practise 37 exam-style questions on Similarity: lengths, areas and volumes for AQA GCSE Maths (Higher non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 37 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

The diagram shows two triangles, ABC and DEF.
Angle CAB = angle FDE and angle ABC = angle DEF.
AB = 6 cm, BC = 8 cm and DE = 9 cm.

Work out the value of \(x\).

Geometry diagram, marked "Not drawn accurately". Triangle ABC. Triangle DEF. Side AB is labelled 6 cm. Side BC is labelled 8 cm. Side DE is labelled 9 cm. Side EF is labelled x cm. Angle CAB and angle FDE are each marked with a single arc (equal angles). Angle ABC and angle DEF are each marked with a double arc (equal angles).

Model answer

The triangles have two pairs of equal angles, so they are similar.
Scale factor \(= \dfrac{9}{6} = 1.5\)
\(x = 8 \times 1.5 = 12\)

Explanation

Two pairs of equal angles mean the third angles are equal too, so the triangles are similar. DE corresponds to AB and EF corresponds to BC, so multiply BC by the scale factor \(\dfrac{9}{6}\). Always match the sides by the equal angles at their ends.

Mark scheme
  1. 1 mark

    M1 for scale factor \(\dfrac{9}{6}\) or 1.5

    oe, e.g. \(\dfrac{x}{8} = \dfrac{9}{6}\) or 8 × 1.5

  2. 1 mark

    A1 for 12

    correct answer with no working scores full marks

Question 2

2 marks

Shape B is an enlargement of shape A with scale factor 3.
The area of shape A is 5 cm².

Here is Kim's working to find the area of shape B.

Area of B = 5 × 3 = 15 cm²

Kim's answer is wrong.
What mistake has Kim made?
Work out the correct area of shape B.

Model answer

Kim multiplied the area by the length scale factor, 3. The area scale factor is \(3^2 = 9\).
Area of B \(= 5 \times 9 = 45\) cm²

Explanation

When lengths are multiplied by 3, an area is multiplied by \(3 \times 3 = 9\), because both the length and the width of every part of the shape are 3 times bigger. Use the length scale factor for lengths, its square for areas and its cube for volumes.

Mark scheme
  1. 1 mark

    B1 for a correct description of the mistake, e.g. she multiplied by the length scale factor instead of the area scale factor, or she should have multiplied by \(3^2 = 9\)

  2. 1 mark

    B1 for 45 cm²

    condone missing units

Question 3

3 marks

A model of a ship is made using a scale of 1 : 50
The area of the deck of the model is 300 cm².

Work out the area of the deck of the real ship.
Give your answer in m².

Model answer

Area scale factor \(= 50^2 = 2500\)
Real deck area = 300 × 2500 = 750 000 cm²
1 m² = 100 × 100 = 10 000 cm²
750 000 ÷ 10 000 = 75 m²

Explanation

The model and the ship are similar with length scale factor 50, so areas are multiplied by \(50^2 = 2500\). Then convert units: there are 10 000 cm² in 1 m², not 100 - a very common mistake.

Mark scheme
  1. 1 mark

    M1 for area scale factor \(50^2\) or 2500

  2. 1 mark

    M1 for 300 × 2500 (= 750 000 cm²)

    ft their area scale factor

  3. 1 mark

    A1 for 75 m²

    correct answer with no working scores full marks; 750 000 cm² with no conversion scores M1 M1 A0

Question 4

4 marks

Two vertical poles, AB and CD, stand on horizontal ground BD.
AB = 6 m, CD = 3 m and BD = 9 m.
A wire goes from A to D and another wire goes from C to B.
The wires cross at X.
XY is the height of X above the ground.

The diagram shows this information.
Work out the value of \(h\).

Geometry diagram, marked "Not drawn accurately". Line segments AB, CD, BD, AD and CB are drawn. Dashed line segment XY is drawn. Y lies on BD. X lies on AD and CB. Angle ABD is marked as a right angle (90°). Angle CDB is marked as a right angle (90°). AB is labelled 6 m. CD is labelled 3 m. BD is labelled 9 m. XY is labelled h m.

Model answer

Let BY = \(p\), so YD = \(9 - p\).
Triangles BYX and BDC are similar: \(\dfrac{h}{p} = \dfrac{3}{9}\), so \(h = \dfrac{p}{3}\)
Triangles DYX and DBA are similar: \(\dfrac{h}{9 - p} = \dfrac{6}{9}\), so \(h = \dfrac{2(9 - p)}{3}\)
\(\dfrac{p}{3} = \dfrac{18 - 2p}{3}\)
\(p = 18 - 2p\)
\(p = 6\)
\(h = \dfrac{6}{3} = 2\)

Explanation

XY is parallel to both poles, so each wire makes a pair of similar right-angled triangles. Writing BY as p gives two expressions for h, which can be set equal. Another way: triangles ABX and DCX are similar with scale factor 2, so X is two thirds of the way from A to D, and h is one third of 6 m.

Mark scheme
  1. 1 mark

    M1 for one correct statement from similar triangles, e.g. \(\dfrac{h}{BY} = \dfrac{3}{9}\) (triangles BYX and BDC)

    oe, e.g. h = BY ÷ 3

  2. 1 mark

    M1 for a second correct statement, e.g. \(\dfrac{h}{9 - BY} = \dfrac{6}{9}\) (triangles DYX and DBA)

    oe; or AX : XD = 6 : 3 from similar triangles ABX and DCX

  3. 1 mark

    M1dep for solving to find BY = 6 or DY = 3

    oe, e.g. \(\dfrac{BY}{3} = \dfrac{2(9 - BY)}{3}\); or \(h = \dfrac{1}{3} \times 6\) using XD = \(\dfrac{1}{3}\)AD

  4. 1 mark

    A1 for 2

    correct answer with no working scores full marks

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.