Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Maths (Higher non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/97

Plans and elevations

Practise 18 exam-style questions on Plans and elevations for AQA GCSE Maths (Higher non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 18 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
18 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

The diagram shows the plan, front elevation and side elevation of a solid.

Write down the name of the solid.

Geometry diagram, marked "Not drawn accurately". A front elevation (triangle) (its vertices are not labelled). A side elevation (rectangle) (its vertices are not labelled). A plan (rectangle) (its vertices are not labelled). A vertical line with no labelled ends is drawn. The text "Front elevation" is written. The text "Side elevation" is written. The text "Plan" is written.

Model answer

Triangular prism

Explanation

The front elevation is a triangle, so the solid has a triangular face at the front. The side elevation and plan are rectangles, and the line along the middle of the plan is the top edge where the two sloping faces meet. A triangular-based pyramid would have a triangle as its plan.

Mark scheme
  1. 1 mark

    B1 for triangular prism

    do not accept prism alone or triangle-based pyramid

Question 2

2 marks

A cylinder has radius 4 cm and length 15 cm.
The cylinder lies on its curved surface on a flat table, so that its circular faces are vertical.

Work out the area of the plan of the cylinder.

Model answer

Seen from above, the cylinder lying down looks like a rectangle.
Width = diameter = \(2 \times 4 = 8\) cm, length = 15 cm
Area \(= 8 \times 15 = 120\) cm²

Explanation

When the cylinder lies on its side, the view from above is a rectangle as long as the cylinder and as wide as its diameter. Using the radius (4 cm) for the width is the usual mistake. The circles only appear in the elevations seen from the ends.

Mark scheme
  1. 1 mark

    M1 for the plan is a rectangle 8 cm by 15 cm, e.g. \(8 \times 15\)

  2. 1 mark

    A1 for 120 cm²

    correct answer with no working scores full marks; SC1 for 60 (using the radius instead of the diameter) only if no other marks are awarded

Question 3

3 marks

The diagram shows a solid made from a cylinder with a hemisphere on top.
The diameter of the cylinder is 10 cm.
The total height of the solid is 13 cm.

Work out the area of the front elevation of the solid.
Give your answer in terms of \(\pi\).

A solid made from a cylinder with a hemisphere on top, drawn in 3D (hidden edges dashed). The diameter is labelled 10 cm (on a dashed line across the base through its centre). The total height is labelled 13 cm (beside a double-headed arrow to the right of the solid, from the bottom to the top of the hemisphere). The diagram is labelled "Not drawn accurately".

Model answer

The front elevation is a rectangle with a semicircle on top.
Radius \(= 10 \div 2 = 5\) cm
Height of the cylinder \(= 13 - 5 = 8\) cm
Rectangle: \(10 \times 8 = 80\) cm²
Semicircle: \(\dfrac{1}{2} \times \pi \times 5^2 = 12.5\pi\) cm²
Area \(= 80 + 12.5\pi\) cm²

Explanation

Seen from the front, a cylinder looks like a rectangle and a hemisphere looks like a semicircle with the same radius. The total height includes the radius of the hemisphere, so subtract 5 cm to get the height of the rectangle. Using 13 cm for the rectangle is the common mistake.

Mark scheme
  1. 1 mark

    M1 for the front elevation is a rectangle with a semicircle on top, and the rectangle is 10 cm by 8 cm

    e.g. \(13 - 5 = 8\) and \(10 \times 8 = 80\)

  2. 1 mark

    M1 for the area of the semicircle, \(\dfrac{1}{2} \times \pi \times 5^2\)

    oe, e.g. \(12.5\pi\)

  3. 1 mark

    A1 for \(80 + 12.5\pi\) cm²

    oe, e.g. \(80 + \dfrac{25\pi}{2}\); do not accept a decimal answer only

Question 4

4 marks

The diagram shows the front elevation and the plan of a prism.
The front elevation is a right-angled triangle. It is the cross-section of the prism.
The volume of the prism is 160 cm³.

Work out the value of \(x\).

Geometry diagram, marked "Not drawn accurately". A front elevation (triangle) (its vertices are not labelled). A plan (rectangle) (its vertices are not labelled). The angle at an unlabelled point is marked as a right angle (90°). The unlabelled side going to the right is labelled 2x cm. The unlabelled side going downwards is labelled x cm. The unlabelled side going to the right is labelled 2x cm. The unlabelled side going upwards is labelled 10 cm. The text "Front elevation" is written. The text "Plan" is written.

Model answer

Area of the triangle \(= \dfrac{1}{2} \times 2x \times x = x^2\)
The plan shows the prism is 10 cm long.
Volume \(= x^2 \times 10 = 10x^2\)
\(10x^2 = 160\)
\(x^2 = 16\)
\(x = 4\) (a length must be positive)

Explanation

The front elevation gives the cross-section and the plan gives the length of the prism. Form an equation using volume = area of cross-section × length and solve it. The negative square root is rejected because x is a length.

Mark scheme
  1. 1 mark

    M1 for the area of the triangle, \(\dfrac{1}{2} \times 2x \times x\) or \(x^2\)

  2. 1 mark

    M1 for their area \(\times 10 = 160\), e.g. \(10x^2 = 160\)

    the length 10 cm comes from the plan

  3. 1 mark

    M1dep for \(x^2 = 16\)

  4. 1 mark

    A1 for \(x = 4\)

    do not accept \(x = \pm 4\) as the final answer; correct answer with no working scores full marks

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.