Practise 30 exam-style questions on Converting standard and compound units for AQA GCSE Maths (Higher non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.
30 questions
1–5 marks each
Instant marking
No sign-up needed
20 questions, marked as you go
Sample questions with model answers
Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.
Question 1
2 marks
Cheese costs £14.40 per kilogram. Jo buys 350 g of cheese.
How much does she pay?
Model answer
350 g = 0.35 kg 100 g costs \(14.40 \div 10 = £1.44\) 350 g costs \(3.5 \times 1.44 = 1.44 \times 3 + 0.72 = 4.32 + 0.72 = 5.04\)
£5.04
Explanation
The price is per kilogram, so change 350 g into kilograms (÷ 1000) or work out the cost of 100 g first. A common mistake is to divide by 100 instead of 1000, which gives £50.40 - far too much for less than half a kilogram.
Mark scheme
1 mark
M1 for \(0.35 \times 14.40\) or \(14.40 \div 1000 \times 350\) oe
e.g. 100 g costs £1.44, so \(3.5 \times 1.44\)
1 mark
A1 for £5.04
accept 504p; correct answer with no working scores full marks
Question 2
2 marks
A rectangle measures \(x\) metres by \(y\) metres.
Write an expression, in terms of \(x\) and \(y\), for the area of the rectangle in square centimetres.
Model answer
Length \(= 100x\) cm, width \(= 100y\) cm Area \(= 100x \times 100y = 10\,000xy\)
\(10\,000xy\) cm²
Explanation
Either convert each length to centimetres first (× 100) and then multiply, or find the area in m² and multiply by 10 000. Multiplying \(xy\) by only 100 is the usual mistake: both the length and the width are 100 times bigger in centimetres.
Mark scheme
1 mark
M1 for \(100x\) and \(100y\), or \(xy \times 10\,000\)
1 mark
A1 for \(10\,000xy\)
oe, e.g. \(100x \times 100y\)
Question 3
3 marks
A rectangular field measures 0.4 km by 250 m. A farmer spreads fertiliser on the whole field at a rate of 3 kg per 100 m².
Work out the total mass of fertiliser needed. Give your answer in tonnes.
Model answer
0.4 km = 400 m Area \(= 400 \times 250 = 100\,000\) m² Fertiliser \(= 100\,000 \div 100 \times 3 = 1000 \times 3 = 3000\) kg 1 tonne = 1000 kg, so 3000 kg = 3 tonnes
3 tonnes
Explanation
Both lengths must be in metres before you multiply, because the rate is given per 100 m². There are 1000 lots of 100 m² in the field, each needing 3 kg. Finally, 1 tonne is 1000 kg.
Mark scheme
1 mark
M1 for \(400 \times 250\) or 100 000 m²
0.4 km converted to 400 m
1 mark
M1 for \(100\,000 \div 100 \times 3\) or 3000 kg
ft their area
1 mark
A1 for 3 tonnes
correct answer with no working scores full marks
Question 4
4 marks
An alloy is made by mixing 0.3 kg of metal A with 0.9 kg of metal B. The density of metal A is 6 g/cm³. The density of metal B is 9 g/cm³.
The volume of the alloy is the total volume of the two metals.
Work out the density of the alloy in g/cm³.
Model answer
Metal A: 300 g, volume \(= 300 \div 6 = 50\) cm³ Metal B: 900 g, volume \(= 900 \div 9 = 100\) cm³ Total mass \(= 1200\) g, total volume \(= 150\) cm³ Density \(= 1200 \div 150 = 8\)
8 g/cm³
Explanation
Density is total mass ÷ total volume, so you cannot just average the two densities. Change the masses to grams to match g/cm³, find the volume of each metal using volume = mass ÷ density, then add the masses and add the volumes.
Mark scheme
1 mark
M1 for \(300 \div 6\) or 50, or \(900 \div 9\) or 100
masses converted to grams
1 mark
M1 for total volume \(50 + 100\) or 150 cm³
ft their volumes
1 mark
M1 for \(1200 \div 150\)
ft their total volume; total mass must be in grams
1 mark
A1 for 8
correct answer with no working scores full marks; 7.5 (the mean of 6 and 9) scores 0
Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.
Ctrl + Enter to check
Study HelperHints first, answers after you try
Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.