Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Maths (Higher non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/97

Areas and volumes of prisms

Practise 28 exam-style questions on Areas and volumes of prisms for AQA GCSE Maths (Higher non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 28 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

The diagram shows a trapezium.

Work out the area of the trapezium.

Geometry diagram, marked "Not drawn accurately". A trapezium (its vertices are not labelled). A dashed vertical line with no labelled ends is drawn. The unlabelled side going to the right is labelled 9.5 cm. The unlabelled side going to the right is labelled 6.5 cm. An unlabelled line going downwards is labelled 4 cm. The angle at an unlabelled point is marked as a right angle (90°). An unlabelled line going to the right and an unlabelled line going to the right are each marked with an arrowhead (parallel lines).

Model answer

Area \(= \dfrac{1}{2}(a + b)h = \dfrac{1}{2} \times (6.5 + 9.5) \times 4 = \dfrac{1}{2} \times 16 \times 4 = 32\) cm²

Explanation

The area of a trapezium is half the sum of the parallel sides times the perpendicular distance between them. Add the parallel sides first: 6.5 + 9.5 = 16. The formula is on the formulae sheet, but you need to know which lengths to use.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{1}{2} \times (6.5 + 9.5) \times 4\)

    oe, e.g. \(8 \times 4\)

  2. 1 mark

    A1 for 32 cm²

    correct answer with no working scores full marks

Question 2

2 marks

A cylinder has radius 5 cm.
The volume of the cylinder is \(150\pi\) cm³.

Work out the height of the cylinder.

Model answer

\(\pi \times 5^2 \times h = 150\pi\)
\(25\pi h = 150\pi\)
\(h = 150 \div 25 = 6\) cm

Explanation

Substitute into \(V = \pi r^2 h\). Because the volume is given in terms of π, the π on each side cancels and no approximation is needed. Using 2 × 5 instead of 5² gives 15, which is wrong.

Mark scheme
  1. 1 mark

    M1 for \(\pi \times 5^2 \times h = 150\pi\)

    oe, e.g. \(150 \div 25\)

  2. 1 mark

    A1 for 6 cm

    correct answer with no working scores full marks

Question 3

3 marks

The diagram shows a prism.
The cross-section of the prism is a trapezium with parallel sides of 12 cm and 8 cm.
The perpendicular height of the trapezium is h cm.
The volume of the prism is 840 cm³.

Work out the value of \(h\).

A prism drawn in 3D with hidden edges shown as dashed lines. Its front face (the cross-section) is a 4-sided shape. The length of the prism is labelled 14 cm (along the edge going back from the lowest right-hand corner of the front face). On the front face, the edge from corner 1 to corner 2 is labelled 12 cm and the edge from corner 3 to corner 4 is labelled 8 cm. The diagram is labelled "Not drawn accurately".

Model answer

Area of cross-section \(= \dfrac{1}{2}(8 + 12) \times h = 10h\)
Volume \(= 10h \times 14 = 140h\)
\(140h = 840\)
\(h = 6\)

Explanation

Write the volume in terms of h using area of cross-section × length, then solve the equation. Alternatively, work backwards: 840 ÷ 14 = 60 cm² for the cross-section, and 60 ÷ 10 = 6.

Mark scheme
  1. 1 mark

    M1 for the area of the trapezium, \(\dfrac{1}{2}(8 + 12)h\) or \(10h\)

  2. 1 mark

    M1dep for \(10h \times 14 = 840\) or \(140h = 840\)

    oe, e.g. \(840 \div 14 = 60\) and \(60 \div 10\)

  3. 1 mark

    A1 for \(h = 6\)

    correct answer with no working scores full marks

Question 4

4 marks

The diagram shows a water trough.
The trough is a prism. Its cross-section is an isosceles triangle with the vertex at the bottom.
The trough is 40 cm wide at the top and 30 cm deep.

Water is poured into the empty trough to a depth of 15 cm.

Show that the water fills one quarter of the trough.

A prism drawn in 3D with hidden edges shown as dashed lines. Its front face (the cross-section) is a 3-sided shape. The length of the prism is labelled 150 cm (along the edge going back from the lowest right-hand corner of the front face). On the front face, the edge from corner 3 to corner 1 is labelled 40 cm. The diagram is labelled "Not drawn accurately".

Model answer

Full cross-section: \(\dfrac{1}{2} \times 40 \times 30 = 600\) cm²
The water's cross-section is a smaller triangle of the same shape. Its depth is half of 30 cm, so its width is half of 40 cm = 20 cm.
Water cross-section: \(\dfrac{1}{2} \times 20 \times 15 = 150\) cm²
The water and the trough have the same length, so the fraction filled \(= \dfrac{150}{600} = \dfrac{1}{4}\)

Explanation

The water forms a smaller triangular prism of the same length. Its triangle is similar to the trough's triangle, so halving the depth also halves the width, and the area becomes a quarter. Many students think half the depth means half full, but the trough is narrower at the bottom.

Mark scheme
  1. 1 mark

    M1 for the area of the full cross-section, \(\dfrac{1}{2} \times 40 \times 30\) or 600

  2. 1 mark

    M1 for the width of the water surface is 20 cm, e.g. by similar triangles

    e.g. half the depth gives half the width

  3. 1 mark

    M1dep for the area of the water cross-section, \(\dfrac{1}{2} \times 20 \times 15\) or 150

  4. 1 mark

    A1 for \(\dfrac{150}{600} = \dfrac{1}{4}\), with a reason that the length is the same for both

    or both volumes worked out with the same length; answer only scores 0 (show that)

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.