Practise 29 exam-style questions on Primes, factors, multiples, HCF and LCM for AQA GCSE Maths (Higher non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.
29 questions
1–5 marks each
Instant marking
No sign-up needed
20 questions, marked as you go
Sample questions with model answers
Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.
Question 1
1 mark
\(n\) is a positive integer.
Which of these must be a multiple of 3?
Choose your answer.
\(n + 3\)
\(3n + 1\)
\(2n\)
\(n(n + 1)(n + 2)\)
Model answer
\(n\), \(n + 1\) and \(n + 2\) are three consecutive integers, so one of them is a multiple of 3. So \(n(n + 1)(n + 2)\) is always a multiple of 3.
Explanation
In any three consecutive integers, exactly one is a multiple of 3, so their product is a multiple of 3. The others fail: \(n + 3\) and \(2n\) are multiples of 3 only when \(n\) is, and \(3n + 1\) is always 1 more than a multiple of 3.
Every whole number greater than 1 has exactly one prime factorisation, so writing 675 as a product of primes gives the only possible values of x and y. 675 ends in 5, so divide by 5 first.
Mark scheme
1 mark
M1 for a correct method to write 675 as a product of primes, e.g. 675 = 25 × 27 or 3 × 3 × 3 × 5 × 5
1 mark
A1 for \(x = 3\) and \(y = 2\)
correct answer with no working scores full marks
Question 3
3 marks
\(12^n = 2^a \times 3^b\)
\(n\), \(a\) and \(b\) are positive integers. \(a + b = 15\)
Write 12 as a product of primes, then raise every factor to the power n. Because prime factorisation is unique, a must be 2n and b must be n. Then a + b = 3n, so n = 5. Check: \(12^5 = 2^{10} \times 3^5\) and 10 + 5 = 15.
Mark scheme
1 mark
M1 for \(12 = 2^2 \times 3\)
1 mark
M1dep for \(12^n = 2^{2n} \times 3^n\), or \(a = 2n\) and \(b = n\)
or a correct trial, e.g. \(12^2 = 2^4 \times 3^2\) giving a + b = 6
1 mark
A1 for \(n = 5\)
correct answer with no working scores full marks
Question 4
4 marks
A rectangular floor is 4.8 m long and 3.6 m wide.
It is to be covered with identical square tiles, with no gaps and no cutting. The side length of each tile is a whole number of centimetres. The tiles are to be as large as possible.
Work out the side length of each tile and the number of tiles needed.
Model answer
4.8 m = 480 cm and 3.6 m = 360 cm \(480 = 2^5 \times 3 \times 5\) \(360 = 2^3 \times 3^2 \times 5\) HCF \(= 2^3 \times 3 \times 5 = 120\) Each tile is 120 cm by 120 cm. Number of tiles = (480 ÷ 120) × (360 ÷ 120) = 4 × 3 = 12
Explanation
The side of a tile must divide both the length and the width exactly, so it is a common factor of 480 and 360; the largest possible tile uses the highest common factor. Then count the tiles in a row and the number of rows and multiply.
Mark scheme
1 mark
M1 for 480 and 360 (cm)
1 mark
M1 for a correct method to find the HCF of 480 and 360, e.g. \(480 = 2^5 \times 3 \times 5\) and \(360 = 2^3 \times 3^2 \times 5\)
or HCF of 48 and 36 (= 12) used
1 mark
A1 for 120 cm
accept 1.2 m
1 mark
A1 for 12 tiles
ft (480 ÷ their side) × (360 ÷ their side) if their side is a common factor of 480 and 360
Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.
Ctrl + Enter to check
Study HelperHints first, answers after you try
Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.