Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Maths (Higher non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/97

Geometry problems on coordinate axes

Practise 28 exam-style questions on Geometry problems on coordinate axes for AQA GCSE Maths (Higher non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 28 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

M is the midpoint of the line segment AB.
A is the point (−2, 4) and M is the point (3, −1).

Work out the coordinates of B.

Model answer

From A to M: x increases by 5 and y decreases by 5.
From M to B is the same again.
\(B = (3 + 5, -1 - 5) = (8, -6)\)

Explanation

M is halfway from A to B, so the step from M to B is the same as the step from A to M. Alternatively, solve \(\frac{-2 + x}{2} = 3\) and \(\frac{4 + y}{2} = -1\). Finding the midpoint of A and M instead is a common error.

Mark scheme
  1. 1 mark

    M1 for a correct method for one coordinate, e.g. \(\dfrac{-2 + x}{2} = 3\), or A to M is 5 right and 5 down

    or one correct coordinate

  2. 1 mark

    A1 for (8, −6)

    correct answer with no working scores full marks

Question 2

2 marks

The line L passes through the origin O and the point \((3, 3\sqrt{3})\).

Work out the size of the acute angle between L and the positive x-axis.

Model answer

The point is 3 across and \(3\sqrt{3}\) up from O.
\(\tan\theta = \dfrac{3\sqrt{3}}{3} = \sqrt{3}\)
\(\theta = 60\)°

Explanation

The horizontal and vertical distances from O form a right-angled triangle with the angle at O. The opposite side is \(3\sqrt{3}\) and the adjacent side is 3, so tan θ = \(\sqrt{3}\), an exact value you should know: tan 60° = \(\sqrt{3}\). The gradient of a line is the tangent of the angle it makes with the x-axis.

Mark scheme
  1. 1 mark

    M1 for \(\tan\theta = \dfrac{3\sqrt{3}}{3}\)

    oe, e.g. \(\tan\theta = \sqrt{3}\)

  2. 1 mark

    A1 for 60(°)

    correct answer with no working scores full marks

Question 3

3 marks

The diagram shows the points A(1, 2) and B(4, 3).
ABCD is a square.
The vertices A, B, C and D go round the square anticlockwise.

Work out the coordinates of C and D.

A coordinate grid with x from −1 to 6 and y from 0 to 7; each grid square is 1 unit across, and the axes cross at the origin O. Point A is marked with a dot at (1, 2). Point B is marked with a dot at (4, 3). A straight line segment joins A (1, 2) to B (4, 3).

Model answer

From A to B is 3 right and 1 up.
BC is AB turned through 90° anticlockwise: 1 left and 3 up.
C = (4 − 1, 3 + 3) = (3, 6)
D = (1 − 1, 2 + 3) = (0, 5)
Check: D to C is 3 right and 1 up, the same as A to B.

Explanation

The sides of a square are equal and meet at right angles. Turning the step '3 right, 1 up' through 90° anticlockwise gives '1 left, 3 up' (swap the numbers and change one sign). Add this step to B to get C and to A to get D.

Mark scheme
  1. 1 mark

    M1 for turning the movement from A to B (3 right, 1 up) through 90° anticlockwise to give 1 left, 3 up

    oe, e.g. \(\begin{pmatrix}-1\\3\end{pmatrix}\), or one correct vertex

  2. 1 mark

    A1 for C = (3, 6)

  3. 1 mark

    A1 for D = (0, 5)

    correct answers with no working score full marks; SC1 for C = (5, 0) and D = (2, −1) (square drawn clockwise)

Question 4

4 marks

The diagram shows the points A(1, 1), B(7, 1) and C(1, 9).
A circle passes through A, B and C.

Work out the coordinates of the centre of the circle.

A coordinate grid with x from 0 to 8 and y from 0 to 10; each grid square is 1 unit across, and the axes cross at the origin O. Point A is marked with a dot at (1, 1). Point B is marked with a dot at (7, 1). Point C is marked with a dot at (1, 9).

Model answer

AB is horizontal and AC is vertical, so angle BAC = 90°.
The angle in a semicircle is 90°, so BC is a diameter of the circle.
The centre is the midpoint of BC: \(\left(\dfrac{7 + 1}{2}, \dfrac{1 + 9}{2}\right) = (4, 5)\)

Explanation

A right angle at A means BC must be a diameter (the converse of the angle in a semicircle theorem), so the centre is the midpoint of BC. Alternatively, the centre is equidistant from A and B, so it lies on x = 4, and from A and C, so it lies on y = 5. The radius is 5.

Mark scheme
  1. 1 mark

    M1 for showing angle BAC = 90°, e.g. AB is horizontal and AC is vertical

  2. 1 mark

    M1dep for BC is a diameter (the angle in a semicircle is 90°)

  3. 1 mark

    M1dep for the midpoint of BC

    e.g. \(\left(\frac{7 + 1}{2}, \frac{1 + 9}{2}\right)\)

  4. 1 mark

    A1 for (4, 5)

    correct answer with no working scores full marks; alternative method: the centre lies on the perpendicular bisectors x = 4 (of AB) and y = 5 (of AC), M1 M1 M1 A1

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.