Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Maths (Higher non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/97

Circles, surface area and volume of solids

Practise 36 exam-style questions on Circles, surface area and volume of solids for AQA GCSE Maths (Higher non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 36 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

A circle has a diameter of 14 cm.

Work out the area of the circle.
Give your answer in terms of \(\pi\).

Model answer

Radius \(= 14 \div 2 = 7\) cm
Area \(= \pi \times 7^2 = 49\pi\) cm²

Explanation

The formula πr² uses the radius, so halve the diameter first. Squaring 14 gives \(196\pi\), which is four times too big. In terms of π means leave π in the answer instead of using a decimal.

Mark scheme
  1. 1 mark

    M1 for \(\pi \times 7^2\)

  2. 1 mark

    A1 for \(49\pi\) cm²

    do not accept a decimal answer only; correct answer with no working scores full marks; SC1 for \(196\pi\) only if no other marks are awarded

Question 2

2 marks

The diagram shows a quarter circle with a radius of 6 cm.

Work out the area of the quarter circle.
Give your answer in terms of \(\pi\).

Geometry diagram, marked "Not drawn accurately". A shaded sector, bounded by the radii an unlabelled line going to the right and an unlabelled line going upwards and the minor arc from an unlabelled point to an unlabelled point. An unlabelled line going to the right is labelled 6 cm. The angle at an unlabelled point is marked as a right angle (90°).

Model answer

Area \(= \dfrac{1}{4} \times \pi \times 6^2 = \dfrac{36\pi}{4} = 9\pi\) cm²

Explanation

A quarter circle is one quarter of a full circle with the same radius, so work out \(\pi r^2\) and divide by 4. Dividing the radius by 4 before squaring is a common error.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{1}{4} \times \pi \times 6^2\)

  2. 1 mark

    A1 for \(9\pi\) cm²

    correct answer with no working scores full marks

Question 3

3 marks

A sphere has a volume of \(288\pi\) cm³.
Volume of a sphere \(= \dfrac{4}{3}\pi r^3\)

Work out the radius of the sphere.

Model answer

\(\dfrac{4}{3}\pi r^3 = 288\pi\)
\(\dfrac{4}{3} r^3 = 288\)
\(r^3 = 288 \times \dfrac{3}{4} = 216\)
\(r = \sqrt[3]{216} = 6\) cm

Explanation

Divide both sides by π, then undo the 4/3 by multiplying by 3/4. The last step is a cube root, not a square root: 6 × 6 × 6 = 216.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{4}{3}\pi r^3 = 288\pi\)

  2. 1 mark

    M1dep for \(r^3 = 216\)

    e.g. \(288 \times 3 \div 4\)

  3. 1 mark

    A1 for 6 cm

    correct answer with no working scores full marks

Question 4

4 marks

The diagram shows a solid toy made from a cylinder and a cone.
The cylinder has radius 3 cm and height 6 cm.
The cone has radius 3 cm and slant height 5 cm.

Curved surface area of a cone \(= \pi r l\), where \(l\) is the slant height.

Work out the total surface area of the toy.
Give your answer in terms of \(\pi\).

A solid made from a cylinder with a cone on top, drawn in 3D (hidden edges dashed). The radius (of the cylinder and the cone) is labelled 3 cm (on a dashed line from the centre of the base to its edge). The height of the cylinder is labelled 6 cm (beside the vertical side of the cylinder). The slant height of the cone is labelled 5 cm (along the sloping side). The diagram is labelled "Not drawn accurately".

Model answer

Base of the cylinder: \(\pi \times 3^2 = 9\pi\) cm²
Curved surface of the cylinder: \(2 \times \pi \times 3 \times 6 = 36\pi\) cm²
Curved surface of the cone: \(\pi \times 3 \times 5 = 15\pi\) cm²
Total \(= 9\pi + 36\pi + 15\pi = 60\pi\) cm²

Explanation

List the surfaces you can actually touch: the circular base, the curved side of the cylinder and the curved surface of the cone. The top of the cylinder and the base of the cone are joined inside the toy, so they are not included.

Mark scheme
  1. 1 mark

    M1 for the base, \(\pi \times 3^2\) or \(9\pi\)

  2. 1 mark

    M1 for the curved surface of the cylinder, \(2 \times \pi \times 3 \times 6\) or \(36\pi\)

    or \(\pi \times 6 \times 6\)

  3. 1 mark

    M1 for the curved surface of the cone, \(\pi \times 3 \times 5\) or \(15\pi\)

  4. 1 mark

    A1 for \(60\pi\) cm²

    correct answer with no working scores full marks; \(69\pi\) (top of the cylinder included) scores M1 M1 M1 A0

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.