Practise 20 exam-style questions on Units of measure for AQA GCSE Maths (Higher calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.
20 questions
1–5 marks each
Instant marking
No sign-up needed
20 questions, marked as you go
Sample questions with model answers
Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.
Question 1
2 marks
Jo says,
"2.35 hours is the same as 2 hours 35 minutes."
Jo is wrong.
What mistake has Jo made? Write 2.35 hours in hours and minutes.
Model answer
Jo has treated the decimal part 0.35 as 35 minutes, but an hour has 60 minutes, not 100. \(0.35 \times 60 = 21\) minutes 2.35 hours = 2 hours 21 minutes
Explanation
Time is not a decimal system: 1 hour = 60 minutes, so the decimal part of an hour must be multiplied by 60 to give minutes. 0.35 of an hour is 0.35 × 60 = 21 minutes. The same mistake happens the other way round, writing 2 hours 21 minutes as 2.21 hours.
Mark scheme
1 mark
B1 for a correct description of the mistake, e.g. she has treated 0.35 of an hour as 35 minutes, but there are 60 minutes in an hour, not 100
accept "she thought there were 100 minutes in an hour" oe
1 mark
B1 for 2 hours 21 minutes
accept 141 minutes
Question 2
2 marks
A plane leaves London at 22:40 London time. The flight to Dubai takes 7 hours 55 minutes. The time in Dubai is 4 hours ahead of the time in London.
What is the time in Dubai when the plane lands?
Model answer
22:40 + 7 h 55 min = 06:35 the next day, London time Dubai is 4 hours ahead: 06:35 + 4 h = 10:35 The plane lands at 10:35 Dubai time.
Explanation
Add the flight time to the departure time, carrying past midnight, then add the 4-hour time difference because Dubai clocks are ahead. A common mistake is to subtract the 4 hours instead of adding them.
Mark scheme
1 mark
M1 for 22:40 + 7 hours 55 minutes = 06:35 (London time) or adding 11 hours 55 minutes to 22:40
oe, e.g. 22:40 + 4 hours = 02:40 Dubai time, then + 7 h 55 min
1 mark
A1 for 10:35
accept 10:35 am or 10.35 (the next day); correct answer with no working scores full marks
Question 3
3 marks
A cube has a volume of 0.512 m³
Work out the total surface area of the cube in cm².
Model answer
Side length = \(\sqrt[3]{0.512} = 0.8\) m = 80 cm Area of one face = \(80^2 = 6400\) cm² Total surface area = \(6 \times 6400 = 38\,400\) cm²
Explanation
The side of the cube is the cube root of its volume. Changing the side to centimetres before working out the area avoids area conversion mistakes; if you work in metres you get 3.84 m², which must be multiplied by 10 000 (not 100) to give cm².
Mark scheme
1 mark
M1 for \(\sqrt[3]{0.512}\) or 0.8 (m) or 80 (cm)
oe, e.g. 512 000 cm³ and \(\sqrt[3]{512\,000}\)
1 mark
M1 for \(6 \times 80^2\) or \(6 \times 0.8^2\) (= 3.84 m²)
ft their side length
1 mark
A1 for 38 400 cm²
correct answer with no working scores full marks
Question 4
4 marks
A tin contains 2.5 litres of paint. The paint in the tin covers an area of 30 m².
Show that the paint forms a layer about 0.08 mm thick.
Model answer
Volume of paint = 2.5 litres = 2500 cm³ Area = 30 m² = 30 × 10 000 = 300 000 cm² The paint layer is a very thin cuboid, so thickness = volume ÷ area Thickness = 2500 ÷ 300 000 = 0.00833... cm 0.00833... cm × 10 = 0.0833... mm This is about 0.08 mm.
Explanation
The layer of paint is a very flat cuboid: volume = area × thickness, so thickness = volume ÷ area. The volume and area must be in matching units (cm³ and cm², or m³ and m²), using 1 litre = 1000 cm³ and 1 m² = 10 000 cm². Only change the thickness to millimetres at the end.
Mark scheme
1 mark
M1 for 2.5 litres = 2500 cm³
oe, e.g. 0.0025 m³ or 2 500 000 mm³
1 mark
M1 for 30 m² = 300 000 cm²
oe in the same units as their volume, e.g. 30 000 000 mm²
1 mark
M1dep for volume ÷ area in consistent units, e.g. \(2500 \div 300\,000\) (= 0.00833... cm)
oe, e.g. 0.0025 ÷ 30 = 0.0000833... m
1 mark
A1 for 0.0833... mm, which is about 0.08 mm
must convert their thickness correctly to mm and show a value that rounds to 0.08; answer only scores 0
Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.
Ctrl + Enter to check
Study HelperHints first, answers after you try
Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.