Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Maths (Higher calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/97

Pythagoras' theorem and trigonometry

Practise 37 exam-style questions on Pythagoras' theorem and trigonometry for AQA GCSE Maths (Higher calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 37 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

The diagram shows a right-angled triangle PQR.
PQ = 9.6 cm and PR = 7.3 cm.

Work out the length of QR.
Give your answer to 3 significant figures.

Geometry diagram, marked "Not drawn accurately". Triangle PQR. Angle QPR is marked as a right angle (90°). Side PQ is labelled 9.6 cm. Side PR is labelled 7.3 cm.

Model answer

\(QR^2 = 9.6^2 + 7.3^2 = 92.16 + 53.29 = 145.45\)
\(QR = \sqrt{145.45} = 12.060...\)
QR = 12.1 cm (3 s.f.)

Explanation

QR is opposite the right angle, so it is the hypotenuse: square the two shorter sides, add, then square root. Check that the hypotenuse is the longest side. Forgetting the square root (giving 145) is a common slip.

Mark scheme
  1. 1 mark

    M1 for \(9.6^2 + 7.3^2\)

    oe; may be implied by 145.45

  2. 1 mark

    A1 for 12.1 cm

    accept [12.05, 12.1] (12.060...); correct answer with no working scores full marks

Question 2

2 marks

The diagram shows a cone with base radius 4.5 cm and perpendicular height 11 cm.
V is the apex, O is the centre of the base and A is a point on the edge of the base.

Work out the size of angle θ between the slant edge VA and the base.
Give your answer to 1 decimal place.

A cone drawn in 3D (hidden edges dashed). The radius is labelled 4.5 cm (on a dashed line from the centre of the base to its edge). The perpendicular height is labelled 11 cm (beside a dashed vertical line from the top down to the centre of the base, with a right angle marked there). Points marked: V is the apex, O is the centre of the base and A is a point on the edge of the base (at the end of the radius). The angle OAV at A is marked θ. The diagram is labelled "Not drawn accurately".

Model answer

Triangle AOV has a right angle at O, with OV = 11 cm and OA = 4.5 cm.
\(\tan \theta = \dfrac{11}{4.5} = 2.444...\)
\(\theta = \tan^{-1}(2.444...) = 67.750...^\circ\)
\(\theta = 67.8^\circ\) (1 d.p.)

Explanation

The height, the radius and the slant edge form a right-angled triangle inside the cone, with the right angle at the centre of the base. From A, the height is opposite θ and the radius is adjacent, so use tan.

Mark scheme
  1. 1 mark

    M1 for \(\tan \theta = \dfrac{11}{4.5}\)

    oe

  2. 1 mark

    A1 for 67.8°

    accept [67.7, 67.8] (67.750...); correct answer with no working scores full marks

Question 3

3 marks

The diagram shows a cuboid ABCDEFGH.
AB = 8 cm, BC = 6 cm and AE = 5 cm.

Work out the size of angle θ, the angle between the diagonal AG and the base ABCD.
Give your answer to 1 decimal place.

A cuboid drawn in 3D with hidden edges shown as dashed lines. The length is labelled 8 cm (along the front bottom edge). The width (the edge going back) is labelled 6 cm (along the bottom edge going back on the right). The height is labelled 5 cm (along the front left vertical edge). The vertices are labelled: base ABCD (A front left, B front right, C back right, D back left) and top EFGH, with E above A, F above B, G above C and H above D. A straight line is drawn from A to G. A straight line is drawn from A to C. The angle CAG at A is marked θ. The diagram is labelled "Not drawn accurately".

Model answer

\(AC = \sqrt{8^2 + 6^2} = \sqrt{100} = 10\) cm
Triangle ACG has a right angle at C, with CG = 5 cm.
\(\tan \theta = \dfrac{5}{10} = 0.5\)
\(\theta = \tan^{-1}(0.5) = 26.565...^\circ\)
\(\theta = 26.6^\circ\) (1 d.p.)

Explanation

The angle between a line and a plane is the angle between the line and its projection on the plane: here AC, directly below AG. Find AC with Pythagoras' theorem on the base, then use tan in the right-angled triangle ACG. Using AB instead of AC gives the wrong angle.

Mark scheme
  1. 1 mark

    M1 for \(AC = \sqrt{8^2 + 6^2}\) (= 10)

    oe

  2. 1 mark

    M1dep for \(\tan \theta = \dfrac{5}{10}\)

    oe, e.g. \(\sin \theta = \dfrac{5}{\sqrt{125}}\)

  3. 1 mark

    A1 for 26.6°

    accept [26.5, 26.6] (26.565...); correct answer with no working scores full marks

Question 4

4 marks

The diagram shows a triangular prism ABCDEF.
The cross-section ABC is a right-angled triangle with the right angle at B.
AB = 8 cm, BC = 5 cm and BE = 12 cm.
The base ABED is a horizontal rectangle and BC is vertical.

Work out the size of angle θ, the angle between the line AF and the base ABED.
Give your answer to 1 decimal place.

A triangular prism drawn in 3D with hidden edges shown as dashed lines. Its end is a right-angled triangle. The base of the triangle is labelled 8 cm (along the bottom edge of the front triangle). The height of the triangle is labelled 5 cm (along the vertical right side of the front triangle). The length of the prism is labelled 12 cm (along the bottom edge going back from the front triangle). The front triangle is ABC (A bottom left, B bottom right, C the top) and the back triangle is DEF, with D behind A, E behind B and F behind C. A straight line is drawn from A to F. A straight line is drawn from A to E. The angle EAF at A is marked θ. The diagram is labelled "Not drawn accurately".

Model answer

F is vertically above E, with EF = BC = 5 cm.
\(AE^2 = 8^2 + 12^2 = 208\), so \(AE = 14.422...\) cm
Triangle AEF has a right angle at E:
\(\tan \theta = \dfrac{5}{14.422...} = 0.3466...\)
\(\theta = 19.120...^\circ\)
\(\theta = 19.1^\circ\) (1 d.p.)

Explanation

To find the angle between a line and a plane, drop a perpendicular from the top of the line to the plane: F is directly above E, so the angle is FAE. AE is a diagonal of the base rectangle, found with Pythagoras' theorem. Using AB (8 cm) instead of AE is a common error.

Mark scheme
  1. 1 mark

    M1 for \(AE^2 = 8^2 + 12^2\)

    oe; may be implied by 208

  2. 1 mark

    A1 for AE = 14.4...

    accept [14.4, 14.43] or \(\sqrt{208}\)

  3. 1 mark

    M1 for \(\tan \theta = \dfrac{5}{\text{their } AE}\)

    oe, e.g. \(\sin \theta = \dfrac{5}{\sqrt{233}}\)

  4. 1 mark

    A1 for 19.1°

    accept [19.1, 19.13] (19.120...); correct answer with no working scores full marks

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.