Practise 29 exam-style questions on Integer and fractional indices for AQA GCSE Maths (Higher calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.
29 questions
1–5 marks each
Instant marking
No sign-up needed
20 questions, marked as you go
Sample questions with model answers
Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.
Question 1
1 mark
Write \(\sqrt[3]{11}\) as a power of 11
Model answer
\(\sqrt[3]{11} = 11^{\frac{1}{3}}\)
Explanation
The cube root is the same as the power \(\frac{1}{3}\), because \(\left(11^{\frac{1}{3}}\right)^3 = 11^{1} = 11\). A common mistake is to write \(11^{3}\) or \(11^{-3}\), which are a cube and the reciprocal of a cube.
Mark scheme
1 mark
B1 for \(11^{\frac{1}{3}}\)
oe, e.g. typed as 11 to the power 1/3; do not accept \(11^{0.3}\) or \(11^{0.33}\)
Question 2
2 marks
Write \(4 \times \sqrt[3]{2}\) as a single power of 2
Write each part as a power of 2: 4 is \(2^2\) and a cube root is the power \(\frac{1}{3}\). Then multiply by adding the indices. A common mistake is to multiply the indices, giving \(2^{\frac{2}{3}}\).
Mark scheme
1 mark
M1 for \(4 = 2^{2}\) and \(\sqrt[3]{2} = 2^{\frac{1}{3}}\)
both needed; may be seen as \(2^{2} \times 2^{\frac{1}{3}}\)
1 mark
A1 for \(2^{\frac{7}{3}}\)
oe, e.g. \(2^{2\frac{1}{3}}\); do not accept \(2^{2.33}\); correct answer with no working scores full marks
Question 3
3 marks
Show that \(\left(\dfrac{27}{64}\right)^{-\frac{2}{3}} = 1\dfrac{7}{9}\)
Deal with the three parts of the index one at a time: the negative sign turns the fraction upside down, the denominator 3 means cube root (of the top and bottom separately), and the numerator 2 means square. In a 'show that' question every step must be written down - just typing it into a calculator gets no marks.
Mark scheme
1 mark
M1 for dealing with the negative index, e.g. \(\left(\frac{64}{27}\right)^{\frac{2}{3}}\) or \(\frac{1}{\left(\frac{27}{64}\right)^{\frac{2}{3}}}\)
oe
1 mark
M1 for dealing with the cube root, e.g. \(\sqrt[3]{\frac{64}{27}} = \frac{4}{3}\) or \(\sqrt[3]{\frac{27}{64}} = \frac{3}{4}\) or \(\frac{9}{16}\) seen
1 mark
A1 for \(\left(\frac{4}{3}\right)^2 = \frac{16}{9} = 1\frac{7}{9}\) with all steps shown
\(\frac{16}{9}\) must be seen; answer only scores 0 (Show that)
Question 4
4 marks
A solid metal cube has edges of length 12 cm.
The cube is melted down. All of the metal is used to make 3 identical smaller cubes.
Work out the total surface area of the 3 smaller cubes. Give your answer to 3 significant figures.
Model answer
Volume of large cube = \(12^3 = 1728\) cm³ Volume of each small cube = \(1728 \div 3 = 576\) cm³ Edge of small cube = \(\sqrt[3]{576} = 8.3203...\) cm Surface area of one small cube = \(6 \times 8.3203...^2 = 415.367...\) cm² Total = \(3 \times 415.367... = 1246.10...\) cm² = 1250 cm² (3 s.f.)
Explanation
The volume is shared equally, not the edge length, so divide the volume by 3 and then cube root to find the new edge. Then each cube has 6 square faces. A common mistake is to divide the edge 12 by 3, which gives cubes with only \(\frac{1}{27}\) of the volume each.
Mark scheme
1 mark
M1 for \(12^3 \div 3\) or 576 seen
\(12^3 = 1728\)
1 mark
M1dep for \(\sqrt[3]{576}\) or 8.32... seen
1 mark
M1 for \(3 \times 6 \times\) (their 8.32...)²
their 8.32... must come from a cube root; 415.3... seen implies the method for one cube
1 mark
A1 for 1250 cm²
accept [1240, 1250] (1246.1...); correct answer with no working scores full marks
Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.
Ctrl + Enter to check
Study HelperHints first, answers after you try
Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.