Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Maths (Higher calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/97

Properties of 3D shapes

Practise 18 exam-style questions on Properties of 3D shapes for AQA GCSE Maths (Higher calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 18 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
18 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A prism has 18 edges.

How many faces does the prism have?

Choose your answer.

  • 6
  • 8
  • 12
  • 20

Model answer

A prism whose cross-section has \(n\) sides has \(3n\) edges.
\(3n = 18\), so \(n = 6\): it is a hexagonal prism.
Faces = 6 rectangles + 2 hexagons = 8

Explanation

A prism has \(n\) edges round each end and \(n\) edges joining the ends, so \(3n\) edges in total. Here the cross-section is a hexagon, giving 2 hexagonal faces and 6 rectangular faces. 6 is the number of sides of the cross-section and 12 is the number of vertices.

Mark scheme
  1. 1 mark

    B1 for 8

Question 2

2 marks

Tom wants to count the edges of a triangular prism.

Here is his working.

3 rectangular faces, each with 4 edges: 3 × 4 = 12
2 triangular faces, each with 3 edges: 2 × 3 = 6
Number of edges = 12 + 6 = 18

What mistake has Tom made?
Work out the correct number of edges.

Model answer

Every edge is where two faces meet, so Tom has counted each edge twice.
Correct number of edges = 18 ÷ 2 = 9
(3 edges on each triangle and 3 edges joining the triangles: 3 + 3 + 3 = 9)

Explanation

An edge is a line where two faces meet, so when you count the edges of each face separately, every edge is counted once for each of its two faces. Halving the total corrects this. You can check with Euler's formula: 5 faces + 6 vertices − 9 edges = 2.

Mark scheme
  1. 1 mark

    B1 for each edge is shared by two faces, so he has counted every edge twice

    oe

  2. 1 mark

    B1 for 9

Question 3

3 marks

A pyramid has a base with \(n\) sides.

Prove that for every pyramid,
number of faces + number of vertices − number of edges = 2

Model answer

Faces: \(n\) triangles (one on each side of the base) + 1 base = \(n + 1\)
Vertices: \(n\) corners of the base + 1 apex = \(n + 1\)
Edges: \(n\) edges round the base + \(n\) sloping edges to the apex = \(2n\)
F + V − E = \((n + 1) + (n + 1) - 2n = 2\)
So F + V − E = 2 for every pyramid.

Explanation

A proof must work for every pyramid, so use \(n\) for the number of sides of the base and write each count in terms of \(n\). The \(n\) terms cancel, leaving 2 whatever the base. Checking a square-based pyramid (5 + 5 − 8 = 2) is a good test but is not a proof.

Mark scheme
  1. 1 mark

    M1 for two of faces \(n + 1\), vertices \(n + 1\), edges \(2n\)

  2. 1 mark

    M1dep for all three correct with reasons, e.g. \(n\) triangular faces and 1 base; \(n\) base vertices and 1 apex; \(n\) base edges and \(n\) sloping edges

  3. 1 mark

    A1 for \((n + 1) + (n + 1) - 2n = 2\) shown

    checking particular pyramids only scores 0

Question 4

4 marks

The diagram shows a cone with base radius 4.2 cm and perpendicular height \(h\) cm.

The curved surface area of the cone is twice the area of its base.

Curved surface area of a cone = \(\pi r l\), where \(l\) is the slant height.

Work out the value of \(h\).
Give your answer to 3 significant figures.

A cone drawn in 3D (hidden edges dashed). The radius is labelled 4.2 cm (on a dashed line from the centre of the base to its edge). The perpendicular height is labelled h cm (beside a dashed vertical line from the top down to the centre of the base, with a right angle marked there). The diagram is labelled "Not drawn accurately".

Model answer

Curved surface area = twice the base area:
\(\pi \times 4.2 \times l = 2 \times \pi \times 4.2^2\)
Divide both sides by \(\pi \times 4.2\): \(l = 2 \times 4.2 = 8.4\) cm
The height, radius and slant height form a right-angled triangle with the slant height as hypotenuse:
\(h^2 = 8.4^2 - 4.2^2 = 70.56 - 17.64 = 52.92\)
\(h = 7.2746...\)
\(h = 7.27\) (3 s.f.)

Explanation

A cone has one flat circular face (area \(\pi r^2\)) and one curved surface (area \(\pi r l\)). Setting the curved area equal to twice the base area shows that the slant height is twice the radius. Then use Pythagoras, remembering the slant height is the hypotenuse - so subtract the squares.

Mark scheme
  1. 1 mark

    M1 for \(\pi \times 4.2 \times l = 2 \times \pi \times 4.2^2\) oe

    e.g. \(\pi r l = 2\pi r^2\) so \(l = 2r\)

  2. 1 mark

    A1 for \(l = 8.4\)

    exact

  3. 1 mark

    M1 for \(h^2 = 8.4^2 - 4.2^2\) or \(\sqrt{52.92}\)

    ft their \(l\) (must be greater than 4.2)

  4. 1 mark

    A1 for 7.27

    accept [7.27, 7.28] (7.2746...); correct answer with no working scores full marks

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.