Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Maths (Higher calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/97

Circles, surface area and volume of solids

Practise 36 exam-style questions on Circles, surface area and volume of solids for AQA GCSE Maths (Higher calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 36 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

The circumference of a bicycle wheel is 194 cm.

Work out the diameter of the wheel.
Give your answer to 1 decimal place.

Model answer

\(\pi d = 194\)
\(d = \frac{194}{\pi} = 61.752...\)
Diameter = 61.8 cm (1 d.p.)

Explanation

Circumference = π × diameter, so divide the circumference by π to get the diameter. Dividing by 2π gives the radius instead.

Mark scheme
  1. 1 mark

    M1 for \(194 \div \pi\)

    oe, e.g. \(\pi d = 194\)

  2. 1 mark

    A1 for 61.8 cm

    accept [61.75, 61.8] (61.752...); SC1 for 30.9 (the radius), only if no other marks are awarded; correct answer with no working scores full marks

Question 2

2 marks

Surface area of a sphere = \(4\pi r^2\) where r is the radius.

Show that the total surface area of a solid hemisphere of radius r is \(3\pi r^2\)

Model answer

Curved surface = half of a sphere's surface = \(\frac{1}{2} \times 4\pi r^2 = 2\pi r^2\)
Flat face = a circle of radius r = \(\pi r^2\)
Total surface area = \(2\pi r^2 + \pi r^2 = 3\pi r^2\)

Explanation

A solid hemisphere has two surfaces: the curved surface, which is half of the sphere's surface area, and a flat circular face. Forgetting the flat face gives only \(2\pi r^2\).

Mark scheme
  1. 1 mark

    M1 for the curved surface area \(\frac{1}{2} \times 4\pi r^2 = 2\pi r^2\)

  2. 1 mark

    A1 for adding the flat circular face \(\pi r^2\) to get \(2\pi r^2 + \pi r^2 = 3\pi r^2\)

    must state or clearly show that the flat face is a circle of area \(\pi r^2\); answer only scores 0

Question 3

3 marks

Volume of a cone = \(\frac{1}{3}\pi r^2 h\) where r is the radius and h is the perpendicular height.

A cone has a base radius of 8 cm and a slant height of 17 cm.

Work out the volume of the cone.
Give your answer in terms of π.

Model answer

\(h = \sqrt{17^2 - 8^2} = \sqrt{289 - 64} = \sqrt{225} = 15\) cm
Volume = \(\frac{1}{3} \times \pi \times 8^2 \times 15 = \frac{1}{3} \times \pi \times 960 = 320\pi\) cm³

Explanation

The volume formula uses the perpendicular height, so find it first with Pythagoras' theorem: the slant height is the hypotenuse, so subtract the squares. Using 17 as the height is the most common mistake.

Mark scheme
  1. 1 mark

    M1 for \(h = \sqrt{17^2 - 8^2}\) (= 15)

  2. 1 mark

    M1dep for \(\frac{1}{3} \times \pi \times 8^2 \times\) their 15

  3. 1 mark

    A1 for \(320\pi\) cm³

    do not accept 1005.3...; correct answer with no working scores full marks

Question 4

4 marks

Volume of a sphere = \(\frac{4}{3}\pi r^3\) where r is the radius.

A ball bearing is a steel sphere with a diameter of 1.2 cm.
The density of the steel is 7.85 g/cm³.

Work out the total mass, in kilograms, of 500 of these ball bearings.
Give your answer to 3 significant figures.

Model answer

Radius = 0.6 cm
Volume of one ball bearing = \(\frac{4}{3} \times \pi \times 0.6^3 = 0.90477...\) cm³
Mass of one = 0.90477... × 7.85 = 7.1025... g
Mass of 500 = 7.1025... × 500 = 3551.2... g
= 3.5512... kg
Total mass = 3.55 kg (3 s.f.)

Explanation

Mass = density × volume, so work out the volume of one sphere using the radius (half the diameter). Multiply by 500 and change grams to kilograms. Using the diameter as the radius makes the answer 8 times too big.

Mark scheme
  1. 1 mark

    M1 for \(\frac{4}{3} \times \pi \times 0.6^3\) (= 0.9047...)

    radius 0.6 must be used

  2. 1 mark

    M1 for their volume × 7.85 (= 7.10...)

  3. 1 mark

    M1 for their mass × 500 ÷ 1000

    oe, e.g. 3551.2... g

  4. 1 mark

    A1 for 3.55 kg

    accept [3.55, 3.552] (3.5512...); correct answer with no working scores full marks

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.