Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Maths (Higher calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/97

Translations as vectors

Practise 18 exam-style questions on Translations as vectors for AQA GCSE Maths (Higher calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 18 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
18 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A translation maps shape A onto shape B.
The vector of the translation is \(\begin{pmatrix}4\\-9\end{pmatrix}\)

Which vector describes the translation that maps shape B onto shape A?

Choose your answer.

  • \(\begin{pmatrix}-4\\9\end{pmatrix}\)
  • \(\begin{pmatrix}4\\9\end{pmatrix}\)
  • \(\begin{pmatrix}-4\\-9\end{pmatrix}\)
  • \(\begin{pmatrix}9\\-4\end{pmatrix}\)

Model answer

To go back from B to A, reverse both movements: 4 right becomes 4 left, and 9 down becomes 9 up.
\(\begin{pmatrix}-4\\9\end{pmatrix}\)

Explanation

The inverse of a translation is the translation by the negative of its vector, so both components change sign. Changing only one sign, or swapping the numbers over, gives a different translation.

Mark scheme
  1. 1 mark

    B1 for \(\begin{pmatrix}-4\\9\end{pmatrix}\)

Question 2

2 marks

A translation maps the point A(−2, 5) onto the point B(3, −1).

Write down the column vector of the translation.

Model answer

Change in x: 3 − (−2) = 5
Change in y: −1 − 5 = −6
Vector = \(\begin{pmatrix}5\\-6\end{pmatrix}\)

Explanation

The vector from A to B is found by subtracting the coordinates of A from the coordinates of B (end minus start). Take care with negatives: 3 − (−2) = 5. Subtracting the other way round gives the vector from B to A.

Mark scheme
  1. 1 mark

    B1 for one correct component in the correct position: top 5 or bottom −6

  2. 1 mark

    B1 for \(\begin{pmatrix}5\\-6\end{pmatrix}\)

    do not accept coordinates (5, −6); \(\begin{pmatrix}-5\\6\end{pmatrix}\) scores 0

Question 3

2 marks

Shape A is translated by the vector \(\begin{pmatrix}-3\\2\end{pmatrix}\) to give shape B.
Shape B is then translated by the vector \(\mathbf{p}\) to give shape C.
The single translation that maps shape A onto shape C has vector \(\begin{pmatrix}4\\-1\end{pmatrix}\)

Work out the vector \(\mathbf{p}\).

Model answer

\(\begin{pmatrix}-3\\2\end{pmatrix} + \mathbf{p} = \begin{pmatrix}4\\-1\end{pmatrix}\)
\(\mathbf{p} = \begin{pmatrix}4\\-1\end{pmatrix} - \begin{pmatrix}-3\\2\end{pmatrix} = \begin{pmatrix}7\\-3\end{pmatrix}\)

Explanation

Following one translation by another adds their vectors, so the first vector plus \(\mathbf{p}\) must equal the combined vector. Subtract to find \(\mathbf{p}\), taking care with negatives: 4 − (−3) = 7. Check: −3 + 7 = 4 and 2 + (−3) = −1.

Mark scheme
  1. 1 mark

    M1 for \(\begin{pmatrix}4\\-1\end{pmatrix} - \begin{pmatrix}-3\\2\end{pmatrix}\)

    or one correct component of \(\mathbf{p}\)

  2. 1 mark

    A1 for \(\begin{pmatrix}7\\-3\end{pmatrix}\)

    correct answer with no working scores full marks

Question 4

4 marks

The diagram shows shape A and the points P(1, 2) and Q(4, 0).

Shape A is rotated 180° about P to give shape B.
Shape B is then rotated 180° about Q to give shape C.

Describe fully the single transformation that maps shape A onto shape C.

A coordinate grid with x from −4 to 7 and y from −3 to 7; each grid square is 1 unit across, and the axes cross at the origin O. Shape A is a shaded triangle with vertices (−3, 3), (−1, 3) and (−3, 6). Point P is marked with a dot at (1, 2). Point Q is marked with a dot at (4, 0).

Model answer

A rotation of 180° about (1, 2) sends (x, y) to (2 − x, 4 − y):
(−3, 3) → (5, 1), (−1, 3) → (3, 1), (−3, 6) → (5, −2), giving B.
A rotation of 180° about (4, 0) sends (x, y) to (8 − x, −y):
(5, 1) → (3, −1), (3, 1) → (5, −1), (5, −2) → (3, 2), giving C.
Compare A and C: (−3, 3) → (3, −1), (−1, 3) → (5, −1), (−3, 6) → (3, 2).
Every point moves 6 right and 4 down.
Translation by the vector \(\begin{pmatrix}6\\-4\end{pmatrix}\)

Explanation

A rotation of 180° about a point takes each vertex to the other side of the centre, the same distance away. Two half-turns bring the shape back the same way up, so the result is a translation. Its vector is twice the vector from P to Q: \(2 \times \begin{pmatrix}3\\-2\end{pmatrix} = \begin{pmatrix}6\\-4\end{pmatrix}\).

Mark scheme
  1. 1 mark

    B1 for shape B correct: vertices (5, 1), (3, 1) and (5, −2)

    may be implied by a correct shape C

  2. 1 mark

    B1 for shape C correct: vertices (3, −1), (5, −1) and (3, 2)

    ft their shape B rotated 180° about Q

  3. 1 mark

    B1 for translation

    do not accept 'move' or 'slide'

  4. 1 mark

    B1 for \(\begin{pmatrix}6\\-4\end{pmatrix}\)

    condone missing brackets; a second transformation scores 0 for the last two marks

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.