Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Practice
Course:
Topics:
Year 7 Maths Smart practice A mixed round aimed at your weak spots
Unit 1
Place value and the number system
Unit 2
Calculating
Unit 3
Factors, multiples and powers
Unit 4
Fractions
Unit 5
Fractions, decimals and percentages
Unit 6
Algebraic expressions
Unit 7
Equations and inequalities
Unit 8
Sequences and graphs
Unit 9
Ratio and proportion
Ratio, proportion and rates of change
Writing and simplifying ratios
Quick practice5 skills
Sharing in a ratio
Quick practice5 skills
Proportion and best buys
Quick practice5 skills
Scale drawings and maps
Quick practice4 skills
Unit 10
Measures, perimeter, area and volume
Unit 11
Angles and shapes
Unit 12
Probability
Unit 13
Statistics
Avg
score:
–
Topics
done:
0/63

Constructing triangles

Practise 22 questions on Constructing triangles for Year 7 Maths. Tap or type your answer and find out straight away if you are right, with the Study Helper on hand if you get stuck.

  • 22 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme.

Question 1

1 mark

When you make an accurate drawing of a triangle, the information you are given is sometimes called SAS.

What does SAS mean?

Model answer

SAS means side, angle, side: you know two sides and the angle between them.

Explanation

SAS stands for side, angle, side. The order matters: the angle is the one between the two sides, where they meet. With this information there is only one triangle you can make. A common mistake is to think any angle will do.

Mark scheme
  1. 1 mark

    Two sides and the angle between them (side, angle, side)

    Accept 'side, angle, side' or 'two sides and the included angle'. 'Two sides and an angle' scores 0 unless it says the angle is between the two sides.

Question 2

2 marks

Grace is asked to make an accurate drawing of triangle ABC with:
AB = 7 cm
angle A \(= 40^\circ\)
angle B \(= 65^\circ\)

Which type of information is this: SSS, SAS or ASA?
When she has finished, what size should angle C be?

Model answer

AB is between the angles at A and B, so this is ASA.
Angle C \(= 180 - 40 - 65 = 75^\circ\)

Explanation

Side AB runs between the corners A and B, so the given side is between the two given angles: angle, side, angle. Grace can check her drawing by measuring angle C. The angles of a triangle add up to \(180^\circ\), so it should be \(75^\circ\); if she measures something very different, she has made a mistake.

Mark scheme
  1. 1 mark

    ASA

    Accept 'angle, side, angle' or 'two angles and the side between them'.

  2. 1 mark

    Angle C \(= 75^\circ\)

    Accept 75. This mark is independent of the first. A correct answer with no working scores this mark.

Question 3

2 marks

Mia is told that the angles of a triangle are \(50^\circ\), \(60^\circ\) and \(70^\circ\).
She says, "There is only one triangle with these angles."

Is Mia right?
How do you know?

Model answer

No. A small triangle and a big triangle can both have angles of \(50^\circ\), \(60^\circ\) and \(70^\circ\): they are the same shape but different sizes. You need to know at least one length as well.

Explanation

Knowing only the angles fixes the shape of a triangle, but not its size. You could make the triangle with a 3 cm base or a 10 cm base and the angles would be the same. That is why SSS, SAS and ASA all include at least one side. A common mistake is to think three facts of any kind are always enough.

Mark scheme
  1. 1 mark

    No, with a relevant but incomplete reason, e.g. 'you need to know a side' with no more

    'No' on its own scores 0.

  2. 1 mark

    A complete reason: triangles of different sizes can have the same three angles (e.g. one with every side twice as long), so the angles do not fix the size of the triangle

    Accept 'you can make a small one and a big one with the same angles'. A complete correct reason on its own scores both marks.

Question 4

4 marks

Two sides of a triangle are 6 cm and 9 cm.
The third side is a whole number of centimetres.

What are the shortest and the longest possible lengths of the third side?

Model answer

The two shorter sides must add up to more than the longest side.
Third side less than \(6 + 9 = 15\)
Third side more than \(9 - 6 = 3\)
Possible lengths: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 and 14 cm

Explanation

If the third side is the longest, it must be shorter than \(6 + 9 = 15\) cm, or the other two sides could not meet. If 9 cm is the longest side, then 6 cm and the third side must add up to more than 9 cm, so the third side is more than 3 cm. So any whole number from 4 to 14 works. A common mistake is to include 3 or 15: those triangles would be flat.

Mark scheme
  1. 1 mark

    The third side must be less than \(6 + 9 = 15\) cm

    May be implied by a list that stops at 14.

  2. 1 mark

    The third side must be more than \(9 - 6 = 3\) cm

    Or 'the third side and 6 cm must add up to more than 9 cm'. May be implied by a list that starts at 4.

  3. 1 mark

    A list of lengths from 4 to 14 with at most one mistake (one missing or one extra)

  4. 1 mark

    4, 5, 6, 7, 8, 9, 10, 11, 12, 13 and 14 cm, and no others

    Accept 'every whole number from 4 to 14'. A correct list with no working scores full marks. 3 or 15 in the list scores 0 for this mark: those lengths would lie flat.

Ready to try the rest? Tap or type your answers and see straight away how you did.

Topic notes

Constructing triangles

The big idea

An accurate drawing (also called a construction) of a triangle has every length and angle exactly the size it should be. You need a sharp pencil, a ruler, a protractor and a pair of compasses. The key question is: what do you need to know to draw exactly one triangle?

Your equipment

  • A ruler measures and draws lengths, in centimetres and millimetres.
  • A protractor measures and draws angles.
  • Compasses draw circles and parts of circles called arcs. The gap between the point and the pencil stays fixed, so every point on an arc is the same distance from the point of the compasses.

What fixes one triangle?

You can draw exactly one triangle (any copy is the same size and shape) if you know:

Short nameWhat you knowEquipment
SSSall three sidesruler and compasses
SAStwo sides and the angle between themruler and protractor
ASAtwo angles and the side between themruler and protractor

Knowing only the three angles is not enough. It fixes the shape but not the size.

Geometry diagram, marked "Diagram NOT accurately drawn". Triangle ABC (shaded). Triangle DEF (shaded). Angle BAC is marked 40°. Angle ABC is marked 60°. Angle ACB is marked 80°. Angle EDF is marked 40°. Angle DEF is marked 60°. Angle DFE is marked 80°. Side AB is labelled 5 cm. Side DE is labelled 8 cm.
Two triangles with the same three angles but different sizes. Angles alone do not fix one triangle.

Drawing a triangle from three sides (SSS)

Geometry diagram, drawn accurately to scale. Triangle ABC. A minor arc from an unlabelled point to an unlabelled point with centre A (the arc subtends 20° at the centre). A minor arc from an unlabelled point to an unlabelled point with centre B (the arc subtends 19° at the centre). Side AB is labelled 9 cm. Side AC is labelled 5 cm. Side BC is labelled 7 cm.
Triangle ABC with sides 9 cm, 5 cm and 7 cm. Every point on the arc centred on A is 5 cm from A; every point on the arc centred on B is 7 cm from B. C is on both arcs.
  1. Use a ruler to draw the longest side, AB = 9 cm.
  2. Set the compasses to 5 cm. Put the point on A and draw an arc above the line.
  3. Set the compasses to 7 cm. Put the point on B and draw an arc that crosses the first one.
  4. The crossing point is C. Join it to A and to B. Leave the arcs on your drawing: they show your method.

Drawing a triangle with a protractor

  • SAS: draw the first side. Put the protractor on one end, measure the angle and draw a line through your mark. Measure the second side along that line, then join its end to the other end of the first side.
  • ASA: draw the side. Measure one angle at each end and draw long lines. The point where the lines cross is the third corner.

Can three lengths make a triangle?

The two shorter sides must add up to more than the longest side, or they cannot reach each other. If they add up to exactly the longest side, they lie flat along it.

Which of these give exactly one triangle?

(a) AB = 6 cm, BC = 4 cm and angle ABC = 50°: angle B is between AB and BC, so this is SAS. One triangle.

(b) Sides 5 cm, 5 cm and 9 cm: \(5 + 5 = 10\), which is more than 9, so this is SSS. One triangle (a long, thin isosceles triangle).

(c) Sides 3 cm, 5 cm and 8 cm: \(3 + 5 = 8\), which is not more than 8, so the triangle lies flat. No triangle.

(d) PQ = 6 cm, angle P = 95° and angle Q = 85°: \(95 + 85 = 180\), so the lines from P and Q are parallel and never meet. No triangle.

Find the shortest straw that works

Ola has straws 5 cm, 6 cm and 13 cm long. She cannot make a triangle, because \(5 + 6 = 11\) is less than 13. She swaps the 5 cm straw for a longer one. What is the shortest whole-number length that works?

The new straw and the 6 cm straw must add up to more than 13 cm, so the new straw must be more than \(13 - 6 = 7\) cm.

A 7 cm straw would lie flat (\(7 + 6 = 13\)), so the shortest is 8 cm: \(8 + 6 = 14\), which is more than 13.

Checking an accurate drawing

Measure every side to the nearest millimetre and every angle to the nearest degree. The three angles should add up to 180°: if they do not, one measurement is wrong.

Common mistakes

  • Thinking any two sides and an angle make SAS: the angle must be between the two sides.
  • Saying three lengths make a triangle when the two shorter ones add up to exactly the longest.
  • Rubbing out the arcs. They show how you found the third corner.
  • Reading the wrong scale on the protractor, which gives 180° minus the angle you wanted.

Top tip

Make a quick sketch first, with the lengths and angles labelled, before you start the accurate drawing. Then draw the longest side, or the side between the given angles, first.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.