Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Maths (Foundation non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number Operations and Integers
Unit 2
Fractions, Decimals and Percentages
Unit 3
Indices and Surds
Unit 4
Approximation and Estimation
Unit 5
Ratio, Proportion and Rates of Change
Unit 6
Algebra
Unit 7
Graphs of Equations and Functions
Unit 8
Basic Geometry
Unit 9
Congruence and Similarity
Unit 10
Mensuration
Unit 11
Probability
Unit 12
Statistics
Avg
score:
–
Topics
done:
0/100

Volume and surface area of prisms and cylinders

Practise 15 exam-style questions on Volume and surface area of prisms and cylinders for OCR GCSE Maths (Foundation non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A cube has a volume of 27 cm³.

Work out the length of one edge of the cube.

Model answer

Volume of a cube = edge \(\times\) edge \(\times\) edge
\(3 \times 3 \times 3 = 27\)
Edge = 3 cm

Explanation

The volume of a cube is its edge length cubed, so the edge is the cube root of the volume. \(3^3 = 27\), so each edge is 3 cm. A common mistake is to divide 27 by 3.

Mark scheme
  1. 1 mark

    B1 for 3

    Accept 3 cm. 9 (\(27 \div 3\)) scores 0. 4.5 (\(27 \div 6\)) scores 0.

Question 2

2 marks

A cuboid has a volume of 360 cm³.
The cuboid is 12 cm long and 5 cm wide.

Work out the height of the cuboid.

Model answer

Volume = length \(\times\) width \(\times\) height
\(12 \times 5 \times h = 360\)
\(60h = 360\)
\(h = 360 \div 60 = 6\) cm

Explanation

The area of the base is \(12 \times 5 = 60\) cm², and the volume is the base area times the height. So divide the volume by 60 to find the height. Check: \(12 \times 5 \times 6 = 360\).

Mark scheme
  1. 1 mark

    M1 for \(360 \div (12 \times 5)\) oe

    Accept \(360 \div 60\) or \(360 \div 12 \div 5\), or \(12 \times 5 \times h = 360\); correct answer with no working scores full marks

  2. 1 mark

    A1 for 6

    Accept 6 cm. 343 (\(360 - 12 - 5\)) or 30 (\(360 \div 12\)) scores M0 A0.

Question 3

3 marks

A cube has edges of length 6 cm.

Show that the number of cm³ in the volume of the cube is the same as the number of cm² in its total surface area.

Model answer

Volume = \(6 \times 6 \times 6 = 216\) cm³
Each face is a square with area \(6 \times 6 = 36\) cm².
A cube has 6 faces, so total surface area = \(6 \times 36 = 216\) cm²
Both are 216, so the numbers are the same.

Explanation

The volume of a cube is the edge cubed. The surface area is 6 faces, each the edge squared. For an edge of 6 cm both calculations come to 216. This only happens for an edge of 6; the units are different (cm³ and cm²), so only the numbers are equal.

Mark scheme
  1. 1 mark

    M1 for \(6 \times 6 \times 6\) oe or 216 for the volume

    Accept \(6^3\).

  2. 1 mark

    M1 for \(6 \times 6 \times 6\) as 6 faces of area 36, or \(6 \times 36\), for the surface area

    The working must show 6 faces each of area \(6 \times 6 = 36\).

  3. 1 mark

    A1 for both values shown to be 216, with a conclusion

    Needs both M marks. This is a 'show that' question: '216 and 216' with no working scores 0.

Question 4

4 marks

A water trough is a prism, as shown in the diagram.
The cross-section of the trough is a trapezium.
The parallel sides of the trapezium are 50 cm and 30 cm, and the depth of the trough is 20 cm.
The trough is 100 cm long.

Work out how many litres of water the trough holds when it is full.

[1 litre = 1000 cm³]

A prism drawn in 3D with hidden edges shown as dashed lines. Its front face (the cross-section) is a 4-sided shape. The length of the prism is labelled 100 cm (along the edge going back from the lowest right-hand corner of the front face). On the front face, the edge from corner 1 to corner 2 is labelled 30 cm and the edge from corner 3 to corner 4 is labelled 50 cm. The diagram is labelled "Not to scale".

Model answer

Area of the cross-section = \(\dfrac{1}{2} \times (50 + 30) \times 20\)
= \(\dfrac{1}{2} \times 80 \times 20 = 800\) cm²
Volume = \(800 \times 100 = 80000\) cm³
In litres: \(80000 \div 1000 = 80\) litres

Explanation

The trough is a prism with a trapezium cross-section, so find the trapezium's area and multiply by the length. Then change cm³ to litres by dividing by 1000. A common error is to multiply all the lengths together as if the trough were a cuboid.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{1}{2} \times (50 + 30) \times 20\) oe or 800

    Area of the cross-section; correct answer with no working scores full marks

  2. 1 mark

    M1 for their \(800 \times 100\) or 80 000 seen

    Volume in cm³. FT their area of the cross-section.

  3. 1 mark

    M1 for their \(80000 \div 1000\)

    Converting their volume in cm³ to litres.

  4. 1 mark

    A1 for 80

    Accept 80 litres. 80 000 as the final answer scores M1 M1 M0 A0. 160 (not halved in the trapezium formula) scores M0 M1 M1 A0. 3 000 000 or 3000 (\(50 \times 30 \times 20 \times 100\), treated as a cuboid) scores 0.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.