Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Design and Technology Smart practice A mixed round aimed at your weak spots
Unit 1
Core technical principles
Unit 2
Specialist technical principles
Unit 3
Designing and making principles
Investigation, primary and secondary data
Investigation, primary and secondary data
Environmental, social and economic challenge
Environmental, social and economic challenge
Design strategies
Design strategies
Communication of design ideas
Communication of design ideas
Prototype development
Prototype development
Selection of materials and components
Selecting materials and components for prototypes
Specialist tools and equipment
Specialist tools and equipment
Avg
score:
–
Topics
done:
0/40

Surface treatments and finishes

Practise 20 exam-style questions on Surface treatments and finishes for AQA GCSE Design and Technology. Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 20 questions
  • 1–8 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Under which conditions will an uncoated steel nail rust?

Choose your answer.

  • In air that has been dried completely
  • In boiled water with a layer of oil on top
  • In tap water that is open to the air
  • Completely covered in oil

Model answer

In tap water that is open to the air

Explanation

Iron and steel rust only when both oxygen and water are present; the iron reacts with them to form hydrated iron oxide (rust). Salt speeds the reaction up, which is why cars and coastal structures rust faster. Surface finishes such as paint, oil, dip coating and galvanising work by keeping water and oxygen away from the steel.

Mark scheme
  1. 1 mark

    In tap water that is open to the air

    If more than one option is given, 0 marks. Dry air has oxygen but no water. Boiled water with oil on top has had the dissolved air removed, and the oil stops more oxygen dissolving, so there is water but no oxygen. Oil keeps both water and oxygen away from the steel.

Question 2

2 marks

Fence posts are often made from tanalised softwood.

Explain why tanalised timber is used for fence posts.

Model answer

Tanalising is a pressure treatment that forces preservative deep into the softwood, not just onto the surface. The preservative protects the wood against rot and insect attack, so the posts can stand in wet soil for many years without decaying, whereas untreated softwood would rot quickly.

Explanation

Softwoods such as pine and spruce are cheap and readily available but have little natural resistance to decay. Because tanalising treats the timber right through rather than coating it, protection remains even after it is cut or scratched, although cut ends should be re-treated. It often gives the wood a green or brown tint.

Mark scheme
  1. 1 mark

    Tanalising forces a preservative deep into the timber under pressure (in a pressure tank / vacuum-pressure treatment)

    Accept 'the wood is pressure treated with a chemical preservative'. Do not accept 'it is painted' or 'it is varnished'.

  2. 1 mark

    This protects the wood from rot (fungal decay) and insect attack, so the posts last many years even though they are in wet ground

    Accept 'untreated softwood would rot quickly in the soil'. Do not accept 'it makes the wood waterproof' or 'it makes it stronger' alone.

Question 3

3 marks

An unfinished mild steel gate is left outdoors near the sea.

Explain how the gate corrodes, and why the corrosion does not stop once a layer of rust has formed on its surface.

Model answer

The iron in the mild steel reacts with oxygen and water from the rain and damp sea air. This oxidation reaction forms rust, which is hydrated iron oxide, and the salt in the sea spray makes the reaction much faster. Rust does not protect the steel, because it is porous and flaky and does not stick firmly to the surface. Water and oxygen pass through it, and pieces flake off, so fresh steel underneath keeps rusting and the gate gets thinner and weaker over time.

Explanation

Corrosion of iron and steel needs both oxygen and water, and salt or polluted air speed it up. Unlike the tough oxide layer on aluminium, rust gives no protection, so steel must be finished, for example with paint, galvanising, powder coating or dip coating, to keep water and oxygen away. Answers that only say 'the gate gets wet' do not explain the process.

Mark scheme
  1. 1 mark

    The iron in the steel reacts with oxygen and water (rain, damp air) in an oxidation reaction to form rust (hydrated iron oxide)

    One mark for each creditworthy point. max 3. A point explained in detail may earn 2 marks. Both oxygen and water must be mentioned for this mark; 'it reacts with the air' alone is not enough.

  2. 1 mark

    Salt from the sea spray dissolves in the water on the steel and speeds up the corrosion

    Accept 'salt water makes it rust faster'.

  3. 1 mark

    Rust is porous (lets water and air through) and does not stick firmly to the steel

  4. 1 mark

    So the rust flakes off or lets water and oxygen through to the fresh steel underneath, which then rusts too, so the gate keeps losing metal and gets weaker

    Do not accept 'rust spreads like a disease', or 'the rust eats the metal' with no explanation. Accept all other valid responses.

Question 4

6 marks

A company sells luxury chocolates in a rigid card box with a lid.

Explain how surface finishes can be used to improve the functional and aesthetic properties of the box.

Give examples in your answer.

Model answer

Printing is the main finish. Offset lithography could print the box in the brand's colours, for example deep purple with gold lettering, with photographs of the chocolates, so the box looks luxurious on the shelf. Printing also has a functional job: it carries the ingredients, allergy advice, weight, best before date, barcode and recycling information that the law and consumers need, and the brand name helps customers recognise the product.

Embossing could raise the company's logo on the lid, by pressing the card between a male and a female die. This gives a three-dimensional, tactile surface that people want to touch, which suggests quality and makes the box feel special as a gift.

UV varnishing improves both function and appearance. A full coat of UV-cured varnish gives a hard, glossy layer that protects the print from scuffs, fingerprints and moisture when the box is handled and transported, so it still looks new in the shop. Alternatively, spot UV varnish could be applied only to the logo and the images of the chocolates, so they shine against a matt laminated background and catch the eye. Gold foil blocking on the name would add even more luxury.

Explanation

Level 3 answers explain how each named finish is applied in outline and what it does for the box, separating functional benefits (information, protection, durability) from aesthetic ones (colour, texture, gloss contrast), with specific examples. Answers that only list finishes are limited to Level 1, and those with no examples cannot go above 4 marks.

Mark scheme
  1. 6 marks

    Levels of response (6 marks).
    Level 3 (5-6 marks): A thorough and detailed explanation with clear, relevant discussion of surface finishes for the box. Excellent understanding of how finishes improve the functional and aesthetic properties of the box. Clear example(s) given to support the response.
    Level 2 (3-4 marks): A good explanation with relevant supporting discussion of surface finishes. Some understanding of how finishes improve the functional and/or aesthetic properties of the box. There may be example(s) given to support the response.
    Level 1 (1-2 marks): Basic discussion with general points made around finishes and what they are. Little or no consideration of examples to support the response.
    0 marks: No response or nothing worthy of credit.

    Maximum of four marks for detailed points but no examples given. Indicative content (illustrative, not exhaustive; credit any worthy points made in support of the band descriptors): PRINTING (e.g. offset lithography for large runs, digital printing for short runs, CMYK plus special colours): aesthetic - brand colours, images of the chocolates, luxury colour schemes such as black and gold; functional - legal and consumer information (ingredients, allergens, best before date, weight, barcode, recycling symbols), brand identity so the product is recognised. EMBOSSING (and debossing): the logo or name raised from the surface between male and female dies; aesthetic - three-dimensional, tactile, high quality feel that suggests luxury; can be combined with foil or print; blind embossing for subtle effects. UV VARNISHING: full-coverage varnish cured by UV light gives a hard glossy coat - functional: protects the print from scuffs, fingerprints and moisture during handling and transport, so the box still looks new when sold; spot UV on the logo or chocolate images gives a gloss contrast against a matt background, drawing the eye. OTHER FINISHES that may be credited: matt or soft-touch lamination (strength, moisture resistance, velvety feel), foil blocking (metallic gold or silver, luxury), window patch, coatings that act as a moisture or grease barrier. Accept all other valid responses.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.