Practise 20 exam-style questions on Material management and marking out for AQA GCSE Design and Technology. Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.
20 questions
1–8 marks each
Instant marking
No sign-up needed
20 questions, marked as you go
Sample questions with model answers
Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.
Question 1
1 mark
A 600 mm length of aluminium bar is cut into four pieces of equal length on a metal-cutting bandsaw. Each of the three cuts removes 2 mm of material (the kerf).
What is the greatest possible length of each piece?
Choose your answer.
150 mm
149.5 mm
148 mm
148.5 mm
Model answer
148.5 mm
Explanation
Four pieces need three cuts, and each cut turns 2 mm of the bar into swarf, so 3 × 2 = 6 mm is lost. The remaining 594 mm is shared between four pieces: 594 ÷ 4 = 148.5 mm. Forgetting the kerf, or counting one cut per piece, are the common errors.
Mark scheme
1 mark
148.5 mm
If more than one option is given, 0 marks. 150 mm ignores the kerf (600 ÷ 4). 149.5 mm allows for only one cut ((600 - 2) ÷ 4). 148 mm allows for four cuts instead of three ((600 - 8) ÷ 4).
Question 2
3 marks
When laser cutting square tiles from a sheet of plywood, a designer places the tiles edge to edge so that neighbouring tiles share a single cut line. This is called common-line cutting.
Explain how common-line cutting reduces waste and production time.
Model answer
With common-line cutting, the edge of one tile is also the edge of the next, so there is no strip of waste plywood between them - only the width of the laser cut is lost. This means more tiles fit on each sheet, so fewer sheets are needed. Each shared edge is also cut once instead of twice, so the laser's cutting path is much shorter and every sheet is cut more quickly, using less energy.
Explanation
Common-line cutting is a form of nesting for shapes with straight edges. It saves both material and machine time, which is why CAD/CAM nesting software uses it. The designer must still allow for the kerf along the shared line, or the tiles will come out slightly small.
Mark scheme
1 mark
no strip of waste material is left between neighbouring tiles; only the kerf is lost
One mark for each valid point, max 3. A point explained in detail may earn 2 marks.
1 mark
so more tiles fit on each sheet and less material is wasted (fewer sheets are bought)
1 mark
each shared edge is cut once instead of twice, so the cutting path is shorter and each sheet takes less time (and energy) to cut
Also credit: the kerf on the shared line must be allowed for in the CAD drawing so the tiles are still the right size. Accept all other valid responses.
Question 3
3 marks
A designer wants to cut coasters in the shape of regular pentagons from a sheet of cork, fitted together with no gaps between them. The interior angles of any pentagon add up to 540°.
Calculate the interior angle of a regular pentagon. Use your answer to explain why regular pentagons cannot be nested together without leaving gaps.
Model answer
Interior angle = 540° ÷ 5 = 108° Where shapes meet at a point with no gaps, their angles must add up to exactly 360°. 360 ÷ 108 = 3.33, which is not a whole number: three pentagons make 324°, leaving a 36° gap, and four would overlap. So regular pentagons cannot tessellate, and some material between them is always wasted.
Explanation
Only shapes whose angles fit exactly round a point tessellate with no waste: squares (4 × 90°), equilateral triangles (6 × 60°) and regular hexagons (3 × 120°) do, but regular pentagons do not. A designer could change the shape, or nest the pentagons in alternating rows and use the gaps for other parts, to reduce waste.
Mark scheme
1 mark
Step 1: interior angle = 540 ÷ 5 = 108°
Award full marks for a correct answer and explanation, even with no working shown.
1 mark
Step 2: shapes that tessellate must have angles that fit together to make exactly 360° around each point
1 mark
Step 3: 360 ÷ 108 = 3.33, which is not a whole number / three pentagons make 324°, leaving a 36° gap (and four would overlap)
ft their interior angle.
Question 4
4 marks
A designer has drawn two lay plans for cutting the pieces of a child's dress from cotton fabric 150 cm wide: - Lay plan 1 uses 1.8 m of fabric. Every piece is placed with its grain line parallel to the selvedge. - Lay plan 2 uses 1.5 m of fabric, but the two sleeves have been turned so that their grain lines are at 90° to the selvedge.
Analyse and evaluate lay plan 2 in terms of the quality of the finished dress.
Model answer
Lay plan 2 saves 0.3 m of fabric on every dress, about 17% less, so it wastes less material and makes each dress cheaper. If the cotton is a plain, closely woven fabric with no pattern, the crosswise grain is fairly stable, and on small pieces like a child's sleeves the difference might hardly be noticed. However, the lengthwise grain of a woven fabric is the strongest and least stretchy direction. Sleeves cut across the grain have a little more give, so they may stretch, twist or hang differently from the rest of the dress, and they may change shape differently when washed. If the fabric had stripes, checks or a one-way print, the sleeves would also look obviously different from the bodice. Overall, I would only use lay plan 2 for a plain, non-directional cotton after testing a sample dress, because the saving is useful but not worth a dress that looks or wears badly; for any patterned fabric lay plan 1 should be used.
Explanation
Level 2 needs the saving and the quality risks both explained - why grain direction affects stretch, hang and appearance - and a justified conclusion. Common pitfalls are discussing only the fabric saved, or saying 'it will look wrong' without explaining why.
Mark scheme
4 marks
Levels of response (4 marks). Level 2 (3-4 marks): Well described and justified analysis of lay plan 2 in terms of the quality of the finished dress, containing full evaluation, drawing on conclusions having considered both positive and negative factors. Level 1 (1-2 marks): Brief points mentioned but not fully explained. Analysis present but limited evaluation/conclusions drawn. May have focused solely on either positive or negative factors. 0 marks: No attempt or nothing worthy of credit.
Indicative content (illustrative, not exhaustive; credit any worthy points made in support of the band descriptors). Positive: uses 0.3 m (about 17%) less fabric per dress, so less waste and lower cost, which matters in batch production; for a plain, closely woven cotton with no one-way pattern, the crosswise grain is fairly stable, so the effect on small sleeves may be slight; the saving could allow a better quality fabric to be used. Negative: the lengthwise grain (warp) is the strongest and least stretchy direction, so sleeves cut across the grain have slightly more give and may stretch, twist or hang differently from the bodice; sleeves may wear or shrink differently after washing; any stripe, check, one-way print or nap would run the wrong way on the sleeves, making them look mismatched; inconsistent quality could lead to complaints or returns. Evaluation: a judgement, e.g. lay plan 2 is acceptable only for a plain, stable, non-directional fabric after testing a sample; otherwise lay plan 1 should be used, because quality matters more than a small saving. Analysis: identification of how the grain direction affects drape, stretch, appearance and durability. Evaluation: a weighed judgement on whether the saving in fabric justifies any loss of quality. Accept all other valid responses.
Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.
Ctrl + Enter to check
Study HelperHints first, answers after you try
Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.