Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Design and Technology Smart practice A mixed round aimed at your weak spots
Unit 1
Core technical principles
Unit 2
Specialist technical principles
Unit 3
Designing and making principles
Investigation, primary and secondary data
Investigation, primary and secondary data
Environmental, social and economic challenge
Environmental, social and economic challenge
Design strategies
Design strategies
Communication of design ideas
Communication of design ideas
Prototype development
Prototype development
Selection of materials and components
Selecting materials and components for prototypes
Specialist tools and equipment
Specialist tools and equipment
Avg
score:
–
Topics
done:
0/40

Ferrous metals, non-ferrous metals and alloys

Practise 18 exam-style questions on Ferrous metals, non-ferrous metals and alloys for AQA GCSE Design and Technology. Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 18 questions
  • 1–8 marks each
  • Instant marking
  • No sign-up needed
18 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Which one of these is a physical property of most metals, but not of most non-metals?

Choose your answer.

  • Brittle when solid
  • Poor conductor of heat
  • Low melting point
  • Good conductor of electricity

Model answer

Good conductor of electricity

Explanation

Metals are good conductors of electricity and heat because they contain electrons that are free to move. Most metals are also malleable, ductile, shiny when polished and dense, with high melting points, while most non-metals are poor conductors and are brittle when solid. This is why metals such as copper and aluminium are used for wires, cables and heat sinks.

Mark scheme
  1. 1 mark

    Good conductor of electricity

    If more than one option is given, 0 marks. Brittle when solid is wrong: solid non-metals (such as sulfur) are usually brittle, while metals are usually malleable and ductile. Poor conductor of heat is wrong: that describes most non-metals; metals are good thermal conductors. Low melting point is wrong: most non-metals melt at low temperatures, while most metals have high melting points (tin is an exception).

Question 2

2 marks

Many of the water pipes inside UK homes are made from copper.

Give two properties of copper that make it suitable for water pipes.

Model answer

Copper resists corrosion, so the pipes do not rust and last for many years.
It is malleable, so the pipes can be bent round corners without cracking.

Explanation

Copper is a non-ferrous metal that resists corrosion, is very malleable and ductile, and is easily soldered, which together suit plumbing. It is also the best common conductor of heat and electricity, which is why it is used for wiring and cylinders, but those properties do not explain its use for cold water pipes. Each property should be linked to the pipes.

Mark scheme
  1. 1 mark

    It resists corrosion / does not rust, so the pipes last for many years and do not contaminate the water

    One mark for each correct property given, max 2.

  2. 1 mark

    It is malleable and ductile, so it can be made into thin tube and bent round corners without cracking

    Accept 'easy to bend' or 'malleable' or 'ductile'.

  3. 1 mark

    It is easily joined by soldering, so the joints are watertight

    Accept 'can be soldered'.

  4. 1 mark

    It is hygienic / antimicrobial / does not taint drinking water

    Do not accept 'good conductor of electricity' (not relevant to water pipes). Do not accept 'good conductor of heat' unless linked to a heating system, e.g. pipes in a heating system pass heat to radiators. Do not accept 'strong' or 'cheap' alone. Accept all other valid responses.

Question 3

3 marks

The body of a traditional wood-burning stove is made from cast iron.

Explain why cast iron is suitable for the body of the stove.

Model answer

Cast iron casts very well, because the molten metal flows easily into a mould. This means the stove body, with its thick walls, legs and decorative details, can be cast in one piece.

Cast iron also withstands the high temperature of the fire without changing shape, and because the body is heavy and dense it stores heat and gives it out slowly into the room after the fire has died down.

Explanation

Cast iron (about 2-4% carbon) is hard, strong in compression and casts easily into complex shapes, so it is used for stoves, machine bases, vice bodies, brake discs and cookware. Its big weakness is brittleness: it can crack if dropped or hit, so an answer describing it as tough is wrong. Linking each property to the stove earns the marks.

Mark scheme
  1. 1 mark

    It casts well: molten cast iron flows easily into a mould, so complex shapes with thick walls and decorative detail can be made in one piece

    1 mark for each creditworthy point; a point explained in detail earns 2 marks. max 3. Accept that its melting point is lower than that of steel, making it easier to cast.

  2. 1 mark

    It withstands the high temperatures of the fire without softening or changing shape

  3. 1 mark

    It is dense and heavy, so the thick body absorbs and stores heat and then gives it out slowly into the room after the fire dies down

    Accept 'retains heat well'.

  4. 1 mark

    It is hard and rigid and strong in compression, so the body keeps its shape and resists wear

  5. 1 mark

    It is relatively low in cost for a large, heavy part

    Do not accept 'cheap' with no context. Do not credit 'tough' or 'resists impacts': cast iron is brittle. Accept all other valid responses.

Question 4

4 marks

A school technician is choosing new twist drill bits for the workshop's pillar drills. The bits will be used to drill steel, aluminium, acrylic and wood. She plans to buy high speed steel (HSS) drill bits.

Analyse and evaluate the use of high speed steel for these drill bits.

Model answer

High speed steel is an alloy steel containing tungsten, chromium and vanadium. Its main advantage is that it keeps its hardness at the high temperatures caused by friction when drilling, so the cutting edges stay sharp even when drilling steel. Plain high carbon steel bits would soften and go blunt if they overheated. This means one set of HSS bits can drill all four materials and will last much longer.

However, HSS bits cost more than high carbon steel bits because of the expensive alloying elements, and they are brittle, so small bits can snap if students force them or if the work moves because it is not clamped.

Overall, HSS is the right choice for a school workshop: the bits must drill steel as well as softer materials, and their longer life outweighs the higher cost, as long as students use the correct speed and clamp their work.

Explanation

Level 2 needs the key property of high speed steel - it keeps its hardness when hot, thanks to its tungsten, chromium and vanadium - linked to drilling, and balanced against its higher cost and brittleness, with a clear conclusion. Saying only 'HSS is hard and strong' stays in Level 1. Do not confuse HSS with stainless steel.

Mark scheme
  1. 4 marks

    Levels of response (4 marks).
    Level 2 (3-4 marks): Well described and justified analysis containing full evaluation, drawing on conclusions having considered both positive and negative factors.
    Level 1 (1-2 marks): Brief points mentioned but not fully explained. Analysis present but limited evaluation/conclusions drawn. May have focused solely on either positive or negative factors.
    0 marks: No attempt or nothing worthy of credit.

    Indicative content (illustrative, not exhaustive; credit any worthy points made in support of the band descriptors): Positive: high speed steel is an alloy steel containing tungsten, chromium and vanadium (often molybdenum or cobalt); it keeps its hardness at the high temperatures produced by friction when drilling, so the cutting edges stay sharp even at high speeds; it can drill hard materials such as steel as well as aluminium, acrylic and wood, so one set covers every material; bits last longer and need sharpening or replacing less often than plain high carbon steel bits, which soften and lose their edge if they overheat; widely available in standard sizes. Negative: costs more than high carbon steel bits because of the alloying elements; harder but more brittle, so small bits can snap if forced or bent, e.g. if the work is not clamped; still needs the correct speed, cutting fluid for steel and care not to overheat; for drilling only wood, cheaper bits would do. Conclusion: e.g. HSS is the best value for a school workshop drilling metals as well as plastics and wood, because the longer life outweighs the higher price. Analysis: identification of properties of high speed steel relevant to drill bits. Evaluation: a judgement weighing the positive and negative factors, ending in a conclusion. An answer with only positive (or only negative) points stays in Level 1. Accept all other valid responses.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.