Practise 18 exam-style questions on Natural and manufactured timbers for AQA GCSE Design and Technology. Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.
18 questions
1–8 marks each
Instant marking
No sign-up needed
18 questions, marked as you go
Sample questions with model answers
Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.
Question 1
1 mark
Which one of these timbers comes from a conifer that loses its needles every winter?
Choose your answer.
Ash
Larch
Pine
Spruce
Model answer
Larch
Explanation
Larch is a conifer, so its timber is a softwood, but unlike most conifers it is deciduous: its needles turn yellow and fall in autumn. This is why 'softwoods come from evergreen trees' is only true of most softwoods. Ash is deciduous too, but it is a broad-leaved tree, so it gives a hardwood.
Mark scheme
1 mark
Larch
If more than one option is given, 0 marks. Ash is wrong: it is a hardwood from a broad-leaved deciduous tree; it loses leaves, not needles, and is not a conifer. Pine is wrong: it is an evergreen conifer that keeps its needles all year. Spruce is wrong: it is also an evergreen conifer.
Question 2
2 marks
Sam is building a model glider. He uses balsa for the wing ribs.
Give two reasons why balsa is suitable for the wing ribs.
Model answer
Balsa has a very low density, so the wing ribs are very light and the glider can stay in the air for longer. It is soft, so Sam can cut the ribs accurately with a craft knife.
Explanation
Balsa is a hardwood with an extremely low density (often about 100-200 kg/m³), yet it is quite strong and stiff for its weight, which is why it is used for model aircraft, prototypes and buoyancy aids. Its softness makes it easy to cut by hand, but it also dents and breaks easily, so it is not used for products that must resist knocks.
Mark scheme
1 mark
It has a very low density / it is very lightweight, so the glider stays in the air for longer
One mark for each correct reason given, max 2. Accept 'lightest timber' or 'very light'.
1 mark
It is strong and stiff for its weight (good strength-to-weight ratio), so thin ribs keep the wing in shape
Do not accept 'strong' alone; it must be linked to its weight or to keeping the wing's shape.
1 mark
It is soft and easy to cut and shape with a craft knife or sanding block, with no need for power tools
1 mark
It is easy to glue / it is sold in thin sheets and strips ready for model making
Do not accept 'cheap' or 'easy to use' without qualification. Accept all other valid responses.
Question 3
3 marks
A workbench top is made from solid beech. It measures 1500 mm × 600 mm × 40 mm. The density of beech is 720 kg/m³.
Calculate the mass of the workbench top.
Give your answer in kg.
Model answer
Volume = 1.5 m × 0.6 m × 0.04 m = 0.036 m³ Mass = volume × density = 0.036 × 720 = 25.92 kg
Explanation
Convert every dimension to metres before working out the volume, because the density is in kg/m³; then mass = volume × density. The usual mistakes are multiplying the volume in mm³ by the density, or writing 40 mm as 0.4 m. Beech is a dense, hard and tough hardwood, which is why a solid beech top is heavy but stands up to hammering and clamping.
Mark scheme
1 mark
Step 1: volume = 1.5 × 0.6 × 0.04 = 0.036 m³
Award full marks for a correct answer, even with no working shown. 36 000 000 mm³ earns this mark only if it is correctly converted to 0.036 m³.
1 mark
Step 2: mass = volume × density = 0.036 × 720
ft their volume in m³. Multiplying a volume in mm³ by 720 earns no further marks.
1 mark
Step 3: 25.92 kg
Accept [25.9, 25.92]. The question gives the unit, so mark the number. ft their volume × 720.
Question 4
4 marks
A garden office is to be clad on the outside with larch boards that will be left untreated.
Analyse and evaluate the use of larch for the cladding.
Model answer
Larch is a good softwood for untreated cladding because it is resinous and its heartwood resists rot better than most softwoods, so it can be used outside without preservative. It is also tough and hard for a softwood, so it will not dent easily, and it is grown in the UK, so it is readily available from managed forests and does not have to travel far. It is cheaper than a durable hardwood such as oak.
However, larch sapwood rots quickly, so the boards must be mostly heartwood. Larch can also split when nailed near the ends of boards, resin may ooze from knots, and the boards may twist as they dry. Left untreated, it will weather to silver-grey, which some owners may not like.
Overall, larch is a suitable choice: it gives durable, low-maintenance cladding at a reasonable cost, as long as good-quality heartwood boards are used and fixed carefully.
Explanation
Level 2 needs both positive points (natural durability, toughness, availability and sustainability, cost) and negative points (non-durable sapwood, splitting, resin and knots, movement, weathering), followed by a clear conclusion. A common error is to say all softwoods rot outdoors unless treated: larch is one of the most durable softwoods, which is why it is chosen for cladding, fencing and boat building.
Mark scheme
4 marks
Levels of response (4 marks). Level 2 (3-4 marks): Well described and justified analysis containing full evaluation, drawing on conclusions having considered both positive and negative factors. Level 1 (1-2 marks): Brief points mentioned but not fully explained. Analysis present but limited evaluation/conclusions drawn. May have focused solely on either positive or negative factors. 0 marks: No attempt or nothing worthy of credit.
Indicative content (illustrative, not exhaustive; credit any worthy points made in support of the band descriptors): Positive: larch is resinous and its heartwood is more naturally resistant to rot and decay than most softwoods, so it can be used outdoors without preservative; it is tough and hard for a softwood, so it resists knocks; untreated, it weathers to a silver-grey colour and needs little maintenance; it is a softwood that grows relatively quickly and is grown in the UK and Europe, so it is readily available, can be FSC or PEFC certified and travels a short distance; it costs less than a durable hardwood such as oak. Negative: its sapwood is not durable, so boards should be mostly heartwood; knots can loosen and resin can ooze out in hot weather; it can split if nailed close to the ends of boards, so holes may need pre-drilling; boards may twist or cup as they dry; the change to grey may be uneven or not to the owner's taste; it will not last as long as some durable hardwoods. Conclusion: e.g. a suitable, sustainable and low-maintenance choice for untreated cladding, provided heartwood boards are chosen and fixed carefully. Analysis: identification of the properties of larch relevant to outdoor cladding. Evaluation: a judgement weighing the positive and negative factors, ending in a conclusion. An answer with only positive (or only negative) points stays in Level 1. Accept all other valid responses.
Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.
Ctrl + Enter to check
Study HelperHints first, answers after you try
Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.