Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Design and Technology Smart practice A mixed round aimed at your weak spots
Unit 1
Core technical principles
Unit 2
Specialist technical principles
Unit 3
Designing and making principles
Investigation, primary and secondary data
Investigation, primary and secondary data
Environmental, social and economic challenge
Environmental, social and economic challenge
Design strategies
Design strategies
Communication of design ideas
Communication of design ideas
Prototype development
Prototype development
Selection of materials and components
Selecting materials and components for prototypes
Specialist tools and equipment
Specialist tools and equipment
Avg
score:
–
Topics
done:
0/40

Papers and boards

Practise 18 exam-style questions on Papers and boards for AQA GCSE Design and Technology. Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 18 questions
  • 1–8 marks each
  • Instant marking
  • No sign-up needed
18 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Papers and boards are classified partly by their weight, given in grams per square metre (gsm).

Which one of these weights is most likely to be a board rather than a paper?

Choose your answer.

  • 50 gsm
  • 90 gsm
  • 130 gsm
  • 400 gsm

Model answer

400 gsm

Explanation

A heavier gsm means more fibre in each square metre, so the sheet is thicker and stiffer. Sources differ on the exact boundary, but material over about 200 gsm is usually called card or board, so 400 gsm is clearly a board (such as duplex board or solid white board). The other weights are typical of layout, tracing and cartridge papers. Board thickness is also often given in microns.

Mark scheme
  1. 1 mark

    400 gsm

    If more than one option is given, 0 marks. 50 gsm is wrong: it is a typical weight for thin layout paper. 90 gsm is wrong: it is a typical weight for tracing paper or everyday printer paper. 130 gsm is wrong: it is a typical weight for cartridge paper, which is a heavy paper but still a paper.

Question 2

2 marks

A board has a thin layer of aluminium bonded to one surface and a white, printable surface on the other. It is used for the lids of trays that hold hot takeaway meals, because the metal layer reflects heat back into the food and stops grease soaking through.

Name this board and give one other product that it is used for.

Model answer

Foil lined board. It is also used for cartons for long-life fruit juice.

Explanation

Foil lined board is board with a thin aluminium foil layer bonded to it. The foil reflects heat, and acts as a barrier to moisture, grease, light and air, so it is used where food or drink must be kept hot, fresh or protected, and its shiny surface also gives a luxury look. The second mark needs a different product from the one in the question.

Mark scheme
  1. 1 mark

    Foil lined board

    Accept foil-lined board, foil laminated board, foil backed board or foil board. Do not accept 'aluminium', 'tin foil' or 'composite' alone.

  2. 1 mark

    One other product, e.g. cartons for long-life drinks such as fruit juice or milk / boxes or packaging for chocolates / packaging for coffee or tea / sleeves or lids for ready meals or frozen food / cosmetics or gift boxes with a metallic finish

    Do not accept the lid of a takeaway tray (given in the question). Do not accept products made from aluminium foil alone, such as foil trays or kitchen foil. Accept all other valid responses.

Question 3

3 marks

A paper mill checks the weight of its bleed proof paper by cutting a circular disc out of a sheet and weighing it. The disc has a diameter of 113 mm and a mass of 0.70 g.

Calculate the weight of the paper in gsm (grams per square metre).

Give your answer to the nearest whole number.

Show your working.

Model answer

Radius = 113 ÷ 2 = 56.5 mm
Area of the disc = π × 56.5² = 10 029 mm²
Area in m² = 10 029 ÷ 1 000 000 = 0.01003 m²
Weight = 0.70 g ÷ 0.01003 m² = 69.8 g/m²
The paper weighs 70 gsm.

Explanation

gsm is the mass in grams of one square metre of paper, so divide the mass of the sample by its area in m². Use the radius (half of 113 mm) in πr², then divide mm² by 1 000 000 to get m²; the common mistakes are using the diameter as the radius and dividing by 1000. A 113 mm disc has an area of almost exactly 100 cm², which is why mills use this size, and 70 gsm is a typical weight for bleed proof marker paper: thin and smooth, but treated so that marker ink does not spread or soak through.

Mark scheme
  1. 1 mark

    Step 1: area of the disc = π × 56.5² = 10 029 mm² (radius = 113 ÷ 2 = 56.5 mm)

    Award full marks for a correct answer, even with no working shown. Accept [10 020, 10 035] mm² (π taken as 3.14, 3.142 or 22/7 is fine), or the area worked out directly in m² (π × 0.0565² = 0.01003 m²), which earns steps 1 and 2. Using the diameter as the radius (π × 113² = 40 115 mm²) does not earn this step.

  2. 1 mark

    Step 2: area in m² = 10 029 ÷ 1 000 000 = 0.01003 m²

    Accept [0.01002, 0.01004] m². ft their area in mm², correctly divided by 1 000 000. Dividing by 1000 (or not converting at all) does not earn this step.

  3. 1 mark

    Step 3: weight = 0.70 ÷ 0.01003 = 69.8, so 70 gsm

    Accept 70. The question asks for the nearest whole number, so an unrounded value such as 69.8 does not earn this step (max 2). ft their area in m², correctly rounded to a whole number: e.g. using the diameter as the radius gives 0.70 ÷ 0.0401 = 17 gsm (steps 2 and 3, max 2). Dividing the mass by an area in mm² (giving about 0.00007) earns no marks for this step.

Question 4

4 marks

A cosmetics company plans to make the boxes for a new range of luxury perfumes from solid white board.

Analyse and evaluate the use of solid white board for these boxes.

Model answer

Solid white board is made from bleached pulp, so it is white all the way through. When a customer opens the box, the inside and the cut edges are as clean and white as the outside, which suits a luxury perfume. Its very smooth surface gives excellent print quality for fine lettering and images, and it can be embossed and foil blocked to make the box look and feel expensive. It is stiff, so the folded box keeps its sharp shape on the shelf.

However, it costs more than duplex board, and it is usually made from new rather than recycled fibre, which uses more resources. It also gives little cushioning, so the glass bottle would need an insert to stop it breaking.

Overall, solid white board is a good choice: for a luxury perfume the premium appearance and print quality are worth the extra cost, which is small compared with the price of the perfume, as long as an insert protects the bottle.

Explanation

Level 2 needs both sides: the positive properties (white throughout, excellent print surface, takes embossing and foil blocking, stiff and folds well) and the drawbacks (higher cost than duplex board, virgin fibre, little cushioning), finished with a clear judgement for luxury perfume boxes. Answers that only list advantages, or say 'strong' and 'looks good' without explanation, stay in Level 1.

Mark scheme
  1. 4 marks

    Levels of response (4 marks).
    Level 2 (3-4 marks): Well described and justified analysis containing full evaluation, drawing on conclusions having considered both positive and negative factors.
    Level 1 (1-2 marks): Brief points mentioned but not fully explained. Analysis present but limited evaluation/conclusions drawn. May have focused solely on either positive or negative factors.
    0 marks: No attempt or nothing worthy of credit.

    Indicative content (illustrative, not exhaustive; credit any worthy points made in support of the band descriptors): Positive: solid white board is made from bleached pulp, so it is white all the way through - the inside of the box and the cut edges are white too, giving a clean, premium look when the box is opened; it has a very smooth surface with excellent print quality for fine detail, photographic images and logos; it takes the finishes used on luxury packaging, such as embossing, foil blocking and varnishing; it is stiff for its thickness, so the box keeps its shape, and it scores and folds cleanly into accurate cartons; it can be recycled with other paper and board and can come from FSC-certified forests. Negative: it costs more than duplex board (although packaging is a small part of the price of a luxury perfume); it is usually made from new (virgin) bleached pulp rather than recycled fibre, which uses more trees, energy and chemicals; it does not cushion knocks like corrugated card, so a glass bottle needs an insert and outer transit packaging; scuffs and marks show on the white surface; it is damaged by water. Conclusion: e.g. suitable, because appearance and print quality matter most for a luxury product and justify the extra cost, provided the bottle is protected by an insert. Analysis: identification of the properties of solid white board relevant to the perfume boxes. Evaluation: a judgement weighing the positive against the negative factors, ending in a conclusion. An answer with only positive (or only negative) points stays in Level 1. Accept all other valid responses.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.