Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Practice
Course:
Topics:
Year 6 Maths Smart practice A mixed round aimed at your weak spots
Unit 1
Place value
Number and place value
Numbers up to ten million
Quick practice5 skills
Rounding whole numbers
Quick practice5 skills
Negative numbers
Quick practice5 skills
Roman numerals
Quick practice4 skills
Unit 2
Calculating
Unit 3
Fractions
Unit 4
Decimals
Unit 5
Fractions, decimals and percentages
Unit 6
Ratio and proportion
Unit 7
Algebra
Unit 8
Measurement
Unit 9
Shapes and angles
Unit 10
Position and direction
Unit 11
Statistics
Statistics
Tables, timetables and bar charts
Quick practice4 skills
Line graphs
Quick practice4 skills
Pie charts
Quick practice5 skills
The mean
Quick practice5 skills
Avg
score:
–
Topics
done:
0/60

Coordinates in four quadrants

Practise 22 questions on Coordinates in four quadrants for Year 6 Maths. Tap your answer and find out straight away if you are right, with the Study Helper on hand if you get stuck.

  • 22 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme.

Question 1

1 mark

The point \((0, -4)\) is plotted on a coordinate grid.

Where is it?

Model answer

On the y-axis

Explanation

The x-coordinate is 0, so the point does not move left or right from the origin. It goes 4 down, along the y-axis. A common mistake is to think a 0 in the coordinates means the x-axis: points on the x-axis have a y-coordinate of 0.

Mark scheme
  1. 1 mark

    on the y-axis

    Accept 'y-axis'.

Question 2

2 marks

Tom plots the point \((4, -1)\).

Ali says, "That is the same point as \((-1, 4)\)."

Is Ali right? How do you know?

Model answer

No. The first number is always across and the second is up or down. \((4, -1)\) is 4 to the right and 1 down. \((-1, 4)\) is 1 to the left and 4 up. They are different points.

Explanation

In coordinates, the order matters: the x-coordinate (across) always comes first and the y-coordinate (up or down) second. \((4, -1)\) is below the x-axis on the right, but \((-1, 4)\) is above the x-axis on the left, so they are different points.

Mark scheme
  1. 1 mark

    No, with a reason that is relevant but incomplete, e.g. 'the numbers are the wrong way round' / 'the order matters'

    'No' alone scores 0. 'Yes' scores 0.

  2. 1 mark

    No, with a complete correct reason, e.g. 'the first number is the x-coordinate: \((4, -1)\) is 4 right and 1 down, but \((-1, 4)\) is 1 left and 4 up' / 'they are in different places on the grid because x always comes first'

    A complete correct reason on its own scores both marks.

Question 3

2 marks

PQRS is a rhombus.

P is at \((-1, 4)\).
Q is at \((2, 2)\).
R is at \((-1, 0)\).

Write the coordinates of S.

Model answer

P and R both have an x-coordinate of \(-1\), so PR is a vertical line. Q is 3 units to the right of PR, so S is 3 units to the left of it, at the same height as Q.
S is \((-4, 2)\).

Explanation

The diagonal PR is a line of symmetry of this rhombus, and Q is 3 units to the right of it. S is the mirror image of Q, so it is 3 units to the left of it at the same height: \((-1 - 3, 2) = (-4, 2)\). A sketch on squared paper helps you check.

Mark scheme
  1. 1 mark

    One coordinate of S correct, or a correct method, e.g. 'S is 3 units to the left of the line PR, as Q is 3 units to the right' or 'R to S is the same as Q to P: 3 left and 2 up'; or the correct answer \((-4, 2)\) with no working

  2. 1 mark

    \((-4, 2)\)

    Accept -4, 2 without brackets. A correct answer with no working scores full marks.

Question 4

4 marks

The diagram shows points A and B. AB is one side of a square ABCD.

There are two different squares that could be drawn. Find all the possible positions of C and D. What are their coordinates?

A coordinate grid with x from −4 to 4 and y from −4 to 6; each grid square is 1 unit across, and the axes cross at the origin O. Point A is marked with a cross at (−2, 1). Point B is marked with a cross at (2, 1). A straight line segment joins A (−2, 1) to B (2, 1).

Model answer

AB is 4 units long, so each side of the square is 4 units.
Above AB: C \((2, 5)\) and D \((-2, 5)\)
Below AB: C \((2, -3)\) and D \((-2, -3)\)

Explanation

AB goes from \(-2\) to 2, so it is 4 units long, and every side of the square is 4 units. The square can be above AB, with C and D 4 units higher than B and A (y-coordinate \(1 + 4 = 5\)), or below AB, with C and D 4 units lower (y-coordinate \(1 - 4 = -3\)). A common mistake is to find only the square above.

Mark scheme
  1. 1 mark

    \((2, 5)\)

    Square above AB.

  2. 1 mark

    \((-2, 5)\)

    Square above AB.

  3. 1 mark

    \((2, -3)\)

    Square below AB.

  4. 1 mark

    \((-2, -3)\)

    Square below AB. Award 1 mark for each correct corner, whichever is called C or D. If a wrong point is also given, max 3. A common wrong answer is \((2, 3)\) and \((-2, 3)\) (a side of 2 instead of 4).

Ready to try the rest? Tap your answers and see straight away how you did.

Topic notes

Coordinates in four quadrants

The big idea

Coordinates are a pair of numbers that give the exact position of a point on a grid, like a map reference. The grid is made from two number lines that cross at 0 and carry on into negative numbers. This splits it into four parts, called quadrants.

The coordinate grid

  • The x-axis is the number line going across.
  • The y-axis is the number line going up and down.
  • The origin, marked O, is where the axes cross. Its coordinates are (0, 0).

Coordinates are written in brackets with a comma between them: (x, y). The x-coordinate comes first. It says how far to go across from the origin: right is positive, left is negative. The y-coordinate comes second. It says how far to go up (positive) or down (negative).

A coordinate grid with x from −5 to 5 and y from −5 to 5; each grid square is 1 unit across, and the axes cross at the origin O. Point A is marked with a dot at (4, 3), labelled "A(4, 3)". Point B is marked with a dot at (−2, 4), labelled "B(−2, 4)". Point C is marked with a dot at (−4, −1), labelled "C(−4, −1)". Point D is marked with a dot at (3, −3), labelled "D(3, −3)". A dashed straight line segment joins (−2, 0) to B (−2, 4). (Length 4; midpoint (−2, 2); vertical, so no gradient.)
One point in each quadrant. To reach B, go 2 left along the x-axis, then 4 up: B is (−2, 4).
Quadrantx-coordinatey-coordinateExample
top rightpositivepositiveA (4, 3)
top leftnegativepositiveB (−2, 4)
bottom leftnegativenegativeC (−4, −1)
bottom rightpositivenegativeD (3, −3)

A point on the x-axis is level with the origin, so its y-coordinate is 0, like (6, 0). Points on the y-axis, such as (0, 7), all have 0 as their x-coordinate.

A point lies in the bottom-left quadrant. It is 3 units from the x-axis and 5 units from the y-axis. Write its coordinates.

Bottom left means both coordinates are negative.

Its distance from the y-axis is how far across it is, so the x-coordinate is \(-5\).

Its distance from the x-axis is how far down it is, so the y-coordinate is \(-3\).

The point is \((-5, -3)\). Be careful: \((-3, -5)\) is a different point.

Lengths and missing corners

For the length of a horizontal or vertical line, count the units between its ends. If it crosses an axis, count in two steps through 0: from \(-2\) to 0 is 2 units, then 5 more to reach 5, so 7 units.

To find a missing corner, use the shape's properties. A square has four sides of equal length. A rectangle has opposite sides equal and parallel. In a parallelogram, the move from one corner to the next must be the same as the move along the opposite side.

A rectangle has its sides going across and up. Its centre is at the origin, and one corner is at \((3, 2)\). Find the other three corners and the lengths of the sides.

A coordinate grid with x from −4 to 4 and y from −3 to 3; each grid square is 1 unit across, and the axes cross at the origin O. A shaded quadrilateral with vertices (3, 2), (−3, 2), (−3, −2) and (3, −2). (Rectangle; area 24 square units.) Point P is marked with a dot at (3, 2), labelled "P(3, 2)". Point Q is marked with a dot at (−3, 2), labelled "Q(−3, 2)". Point R is marked with a dot at (−3, −2), labelled "R(−3, −2)". Point S is marked with a dot at (3, −2), labelled "S(3, −2)".
The rectangle reaches just as far left as right, and just as far down as up.

The centre is in the middle, so the rectangle reaches 3 units left of the y-axis as well as 3 units right, and 2 units below the x-axis as well as 2 above.

The corners are \((-3, 2)\), \((-3, -2)\) and \((3, -2)\).

Long sides: count from \(-3\) across 0 to 3, which makes 6 units. Short sides: \(-2\) up to 2 makes 4 units.

Coordinates with letters

A letter can stand for a number we do not know. A move to the right makes the x-coordinate bigger, and a move up makes the y-coordinate bigger.

The points \((k, 2)\) and \((k + 5, 2)\) are the two ends of a line. Is the line horizontal or vertical? How long is it?

The second number in each pair is 2, so the two ends are level: the line is horizontal.

The x-coordinate goes from \(k\) to \(k + 5\), which is 5 more. The line is 5 units long, whatever number \(k\) is.

Check with \(k = -3\): the ends are \((-3, 2)\) and \((2, 2)\), which are 5 units apart.

Stretch: the midpoint of a line

The midpoint is the point exactly halfway along a line. On a horizontal line it is level with both ends, and it is half the line's length from each end.

M is the midpoint of a horizontal line AB that is 10 units long. M is at \((1, -2)\). Find A and B.

A and B are each half of 10 units, which is 5 units, from M.

A is 5 to the left: \(1 - 5 = -4\). B is 5 to the right: \(1 + 5 = 6\).

The line is horizontal, so A and B are level with M: A is \((-4, -2)\) and B is \((6, -2)\).

Common mistakes

  • Writing the coordinates the wrong way round. \((2, -5)\) and \((-5, 2)\) are different points: across always comes first.
  • Leaving out a minus sign for a point left of the y-axis or below the x-axis.
  • Finding the distance from \(-2\) to 5 by working out \(5 - 2\). Count through 0 instead.
  • Thinking a point on the x-axis has an x-coordinate of 0. It is the y-coordinate that is 0.

Top tip

Put your finger on the origin. Move along the x-axis first, then up or down, saying the moves out loud: "4 left, 1 down" is \((-4, -1)\).

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.